Gtech ProLite Bedienungsanleitung
OPERATING MANUAL
Model number: MM001
OPERATING MANUAL
ProLite
4703_ProLite_body_only_manual_aw3.indd 14703_ProLite_body_only_manual_aw3.indd 1 09/06/2021 14:2809/06/2021 14:28
4
4
2
1
6
5
3
What’s in the box
Crevice tool
Battery (available separately)
4Spare bags X2
Dusting brush
2
Main unit (bag fitted)
1
Charger (available separately)
5
3
6
Make a note of your product serial number for future reference. You can find this on the
underside of the product.
_ - _ _ - _ _ _ ~
_ _ _ _ _ ~
_ _ _ _ ~
_ _ ~ _ _ _ _ _ _ _
X-XX-XXX~
XXXXX~
WWYY~
00~0000000
Thank you for choosing Gtech
“Welcome to the Gtech family. I started Gtech to create sensible, easy
to use products that do a great job, and hope you get many years of
trouble-free performance from your new product.”
Nick Grey – Inventor, owner of Gtech
4703_ProLite_body_only_manual_aw3.indd 44703_ProLite_body_only_manual_aw3.indd 4 09/06/2021 14:2809/06/2021 14:28
5
Tool configurations
Your Pro Lite comes with a crevice tool and
dusting brush as standard. Other tools are also
available (see section at the back of this manual).
Operation
Press the power button above the handle to turn
your vacuum on and off. It has a power symbol
on it. Press the mode button above the handle to
switch between ‘Eco’ and ‘Max, mode.
There is a LED headlight on top of the product to
illuminate the area being cleaned.
LED headlights
The battery indicator shows how much charge
remains in the battery.
Battery state of charge
100% 16%
15% 1%
4703_ProLite_body_only_manual_aw3.indd 54703_ProLite_body_only_manual_aw3.indd 5 09/06/2021 14:2809/06/2021 14:28
6
Whilst charging, the ‘G’ on the battery will
pulsate green. Once the battery is fully charged,
the indicator will show a solid green colour. This
will take up to 2 hours from flat.
For a quick burst of cleaning, you can charge the
battery for just 30 minutes.
Connect the charger to the charging port
located on the back of the battery pack. Plug the
charger into the mains socket. You can charge
the battery both on and off the product.
Charging the battery
Press the latch on top of the battery downwards and
slide it out of the product.
To refit the battery, simply slide it into the battery
housing. Push the battery into the battery
housing until it clicks into place.
If you want to buy a spare battery, go to
www.gtech.co.uk/spares.
Removing the battery Replacing the battery
4703_ProLite_body_only_manual_aw3.indd 64703_ProLite_body_only_manual_aw3.indd 6 09/06/2021 14:2809/06/2021 14:28
7
Bag removal
Cover the bag by folding over the lid.
Dispose of the bag and replace with a new
one. You can get more bags at:
www.gtech.co.uk/spares
or call 08081 685 028
Do not reuse bags as this could damage and
reduce the performance of your Gtech product.
Unlock the bag chamber by sliding down the
release latch located on the front of the product.
Pull the chamber cover away from the main
unit.
Slide the bag out of the bag chamber by gripping
the collar of the bag.
4703_ProLite_body_only_manual_aw3.indd 74703_ProLite_body_only_manual_aw3.indd 7 09/06/2021 14:2809/06/2021 14:28
8
Bag installation
Before placing the bag in the chamber, ensure
the bag is fully expanded by gently unfolding
and spreading the fabric of the bag.
Refit the chamber cover. Fit the pegs on the
cover into the slots at the bottom, then push
the top part of the cover. You will hear a click
when the cover is correctly fitted.
Do not use the vacuum without a bag;
it may damage the motor and will
invalidate your warranty.
Slide the bag collar into the grooves inside the
bag chamber. Make sure the collar is completely
inserted into the chamber and the bag has
expanded. A reduction in suction will occur if the
bag has not expanded or is incorrectly fitted.
4703_ProLite_body_only_manual_aw3.indd 84703_ProLite_body_only_manual_aw3.indd 8 09/06/2021 14:2809/06/2021 14:28
9
Jams and blockages
If the bag is full or there is a blockage, there will be a reduction
in suction.
Remove the battery and bag and look through
the nozzle. Remove any blockages.
A light above the main unit’s window allows you
to check when the bag is full. You can also check
for blockages.
The tools can block sometimes too, so remove
these from the main unit before checking for
blockages.
If the brush bar has jammed or there is a
blockage, the battery will display a solid amber
light for 5 seconds.
4703_ProLite_body_only_manual_aw3.indd 94703_ProLite_body_only_manual_aw3.indd 9 09/06/2021 14:2809/06/2021 14:28
10
Power brush
To attach the power brush, slot it over the
standard nozzle. The power must be off while
changing nozzles. To remove, place your fingers
in the indents of the attachment, grip and pull it
away from the main unit.
Optional extras
To clean the brush bar, first remove the power
brush. Rotate the latch from the ‘locked’ to the
‘unlocked’ position and pull out the brush bar.
To remove hair from the brush bar, run the hair
removal tool down the groove to cut the hair,
then pull it out. Never operate the power head
without the brush bar in.
To remove hair from the brush bar, run the hair
removal tool down the groove to cut the hair,
then pull it out with the comb. Never operate the
power head without the brush bar in.
4703_ProLite_body_only_manual_aw3.indd 104703_ProLite_body_only_manual_aw3.indd 10 09/06/2021 14:2809/06/2021 14:28
11
The flexible power hose attaches in the same way as the other accessories and can be used as it is or
with the addition of other tools.
Flexible power hose
Optional extras
4703_ProLite_body_only_manual_aw3.indd 114703_ProLite_body_only_manual_aw3.indd 11 09/06/2021 14:2809/06/2021 14:28
12
Wall mount
Install your wall mount at least 1035mm from the
floor. Universal fixings have been included - please
use the correct fixings for the wall type you’re
mounting this item to. Please use a stud finder to
ensure no water pipes or electrical cables are hit.
If you are unsure, please seek professional advice.
Pull the detachable tool kit out from the fixed
section of the wall mount. You can also carry
the detachable part of your wall mount with
you while you clean - attach it to your belt. Extra
precautions must be taken to ensure you do not
damage the product or injure yourself.
Optional extras
1035mm
The tools can be stored like this on the wall
mount. Your wall mount will look like the picture
on the right when fully assembled with the
ProLite.
4703_ProLite_body_only_manual_aw3.indd 124703_ProLite_body_only_manual_aw3.indd 12 09/06/2021 14:2809/06/2021 14:28
Inhaltsverzeichnis
Andere Gtech Staubsauger Handbücher
Gtech
Gtech Pro2 Bedienungsanleitung
Gtech
Gtech Pro2 ATF308 K9 Bedienungsanleitung
Gtech
Gtech MULTI ATF036 Bedienungsanleitung
Gtech
Gtech AirRam K9 AR21 Bedienungsanleitung
Gtech
Gtech CV04 Bedienerhandbuch
Gtech
Gtech ATF024 Bedienungsanleitung
Gtech
Gtech MULTiMK2 Bedienungsanleitung
Gtech
Gtech MULTI ATF001 Bedienungsanleitung
Gtech
Gtech AirRAM AR05 Bedienungsanleitung
Gtech
Gtech AirRam K9 Bedienungsanleitung
Gtech
Gtech POWER FLOOR ATF038 Bedienungsanleitung
Gtech
Gtech AirFOX Platinum AF01 Bedienungsanleitung
Gtech
Gtech Advanced Power Sweeper Bedienungsanleitung
Gtech
Gtech ProLite MM001 Bedienungsanleitung
Gtech
Gtech Multi Mk.2 Bedienungsanleitung
Gtech
Gtech Pro2 Bedienungsanleitung
Gtech
Gtech HV01 Bedienerhandbuch
Gtech
Gtech AR35 Bedienungsanleitung
Gtech
Gtech AirRam Bedienungsanleitung
Gtech
Gtech Power Floor K9 Bedienungsanleitung
Beliebte Staubsauger Handbücher anderer Marken
Bissell
Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung
Panasonic
Panasonic MC-YL637S147-AE Bedienungsanleitung
NEFF
NEFF N17XH10 0 Series Bedienungsanleitung
LG
LG A9 Series Bedienungsanleitung
Oreck
Oreck Cordless Captura BK51700 Series Bedienungsanleitung
Kogan
Kogan KAVACROBVWA Bedienungsanleitung
