GYROZEN 1580 Bedienungsanleitung

Operation

Start / StopFunction Selection

Touch the numeric buttons to

change and touch enter button

to save

Touch a parameter

to be changed

PROG Save / Call

Parameter Change

Touch start / stop button

Touch once : CALL

Touch twice : SAVE

Display & Control Panel

Cat. No. GZ-1580 Cat. No. GZ-1248

Touch the numeric

buttons to change and

touch enter button to

save or call

Display Screen

Status of Speed, Time,

ACC, DEC, Running,

Lid Open / Close

Setting DEC

DEC (0 ~ 9 / Natural DEC 0)

Setting ACC

ACC (1 ~ 9 / Max. 9)

Program SAVE / CALL

Touch once : CALL

Touch twice : SAVE (up to 100)

Setting Speed

Touch once : RPM

Touch twice : RCF

Pulse

Short Spin

Start / Stop

LED ON : Start / Run

LED OFF : Stop

Lid Open

Open : LED turns on

Key Lock / UnLock

End Alarm

Sound volume

(level : 0 ~ 10, 0 : silent)

Key Lock / UnLock

At Set Speed

ON : Counts the time at set speed / OFF : Counts the time from starting

Touch more than 2 sec. : Repeat time of end alarm (time : 0 ~ 99, 0 : silent)

Non-Refrigerated, Multi-Purpose, High- Speed Centrifuges

Quick Guide

Setting Time

To 99 min. 59 sec. or

Continuous (00:00)

Operation

Non-Refrigerated, Multi-Purpose, High- Speed Centrifuges

Quick Guide

Position the centrifuge with enough space

(30 cm) on each side of centrifuge to ensure

proper air circulation and safety zone.

Secure a safety zone or 30 cm around

centrifuge

Maintenance Tips

Use the power cord supplied with the device

and connect the device to the power supplies

that match the electrical requirements. Switch

o󽗈 the device and disconnect the power plug

after using the centrifuge.

Electrical safety

30 cm

Order & Inquiry : +82-2-3452-7736ㅣ[email protected]omㅣtechsupport@gyrozen.comㅣwww.gyrozen.com

Download corresponding user manual from www.gyrozen.com

EQG-7(Rev.1) Proudly made by Jieun Hwang, Hyewon Jeong

Clean rotor pivots and bucket grooves.

Lubricate them by coating the grease

sometimes to swing the buckets enough.

If the centrifuge lid won’t open, insert the emergency lid

open tool into the hole and turn it counter clockwise.

(Before manual opening, switch o󽗈 the device and wait

until spinning is completely stopped.)

Lubricate the contact area Emergency lid open

Balancing the rotor

When centrifuge is installed, check

the horizontality by a Bubble Leveler.

Balance for centrifuge & rotor

If a rotor is absent and power is supplied,

“Rotor Scan”→“Error 9” will be appeared.

This message will be cleared after rotor cou-

pling and lid closing.

Automatic rotor identi󽗉cation

Load the sample symmetrically.Clean the motor shaft. Remove the

foreign substances not to cause

any vibration.

Chamber cleaning & checking

A A

B B

C C

D D

Inspect the rotor and accessories for

damage before each use. Discon-

tinue use and replace it if damaged.

Checking accessories for

damage

Precautions for Use

Andere Handbücher für 1580

Dieses Handbuch passt für folgende Modelle

Andere GYROZEN Laborausrüstung Handbücher

GYROZEN

GYROZEN mini Bedienungsanleitung

GYROZEN

GYROZEN 1524 Bedienungsanleitung

GYROZEN

GYROZEN 1096R Bedienungsanleitung

GYROZEN

GYROZEN 1736R Bedienungsanleitung

GYROZEN

GYROZEN MicroCentrifuge mini Bedienungsanleitung

GYROZEN

GYROZEN 416 Bedienungsanleitung

GYROZEN

GYROZEN 416 Bedienungsanleitung

GYROZEN

GYROZEN 1580 Bedienungsanleitung

GYROZEN

GYROZEN 1730R Bedienungsanleitung

GYROZEN

GYROZEN 1848R Bedienungsanleitung

GYROZEN

GYROZEN 416 Bedienungsanleitung

GYROZEN

GYROZEN 1848R Bedienungsanleitung

GYROZEN

GYROZEN 1696R Bedienungsanleitung

GYROZEN

GYROZEN 624R Bedienungsanleitung

GYROZEN

GYROZEN 2236R Bedienungsanleitung

GYROZEN

GYROZEN 406 Bedienungsanleitung

GYROZEN

GYROZEN 1236R Bedienungsanleitung

GYROZEN

GYROZEN MD406 Bedienungsanleitung

GYROZEN

GYROZEN 1096R Bedienungsanleitung

GYROZEN

GYROZEN 2236R Bedienungsanleitung

GYROZEN

GYROZEN 1248R Bedienungsanleitung

GYROZEN

GYROZEN 1248R Bedienungsanleitung

GYROZEN

GYROZEN 1580R Bedienungsanleitung

GYROZEN

GYROZEN 1730R Bedienungsanleitung

Beliebte Laborausrüstung Handbücher anderer Marken

Qiagen

Qiagen DML 3000 Bedienungsanleitung

Queensgate

Queensgate NANOSCAN OP400 Programmierhandbuch

Conviron

Conviron GEN1000-GE Bedienungsanleitung

Parr Instrument

Parr Instrument 4560 Bedienungsanleitung

IKA

IKA IC control Bedienungsanleitung

Integra

Integra DOSE IT Bedienungsanleitung

Agilent Technologies

Agilent Technologies 5800 ICP-OES Bedienungsanleitung

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Bedienungsanleitung

NI PXI-5422 Handbuch

Collomix

Collomix Aqix Bedienungsanleitung

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Bedienungsanleitung

Ocean Insight

Ocean Insight FLAME-NIR+ Bedienungsanleitung

Parker

Parker ALIGN-MG-NA Bedienungsanleitung

BD 644787 Bedienungsanleitung

DENTAURUM

DENTAURUM Compact Megaplus Bedienungsanleitung

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Bedienungsanleitung

VWR

VWR SAS Super IAQ Bedienungsanleitung

illumina

illumina MiSeqDx Bedienungsanleitung