H3C AR 46-80 Bedienungsanleitung

H3C AR 46 Series Routers

Installation Manual

Hangzhou H3C Technologies Co., Ltd.

http://www.h3c.com

Manual Version: T2-08044X-20070419-C-1.03

No part of this manual may be reproduced or transmitted in any form or by any means

without prior written consent of Hangzhou H3C Technologies Co., Ltd.

Trademarks

H3C, , Aolynk, , H3Care,

, TOP G, , IRF, NetPilot,

Neocean, NeoVTL, SecPro, SecPoint, SecEngine, SecPath, Comware, Secware,

Storware, NQA, VVG, V2G, VnG, PSPT, XGbus, N-Bus, TiGem, InnoVision and

HUASAN are trademarks of Hangzhou H3C Technologies Co., Ltd.

All other trademarks that may be mentioned in this manual are the property of their

respective owners.

Notice

The information in this document is subject to change without notice. Every effort has

been made in the preparation of this document to ensure accuracy of the contents, but

all statements, information, and recommendations in this document do not constitute

the warranty of any kind, express or implied.

To obtain the latest information, please access:

http://www. h3c.com

Technical Support

customer_service@h3c.com

http://www. h3c.com

About This Manual

Related Documentation

In addition to this manual, each H3C AR46 Series Routers documentation set includes

the following:

Manual Description

Comware V3 Operation Manual

The manual is a guide for the user to

perform the operations correctly. It is

organized into the parts of getting

started, system management, interface,

link layer protocol, network protocol,

routing protocol, multicast protocol,

security, VPN, reliability, QoS, MPLS,

dial-up and Non-IP Architecture, as well

as acronyms used in the manual.

Comware V3 Command Manual

The manual gives the user a detailed

description of the operating commands.

It is organized into the parts of getting

started, system management, interface,

link layer protocol, network protocol,

routing protocol, multicast protocol,

security, VPN, reliability, QoS, MPLS,

dial-up and Non-IP Architecture, as well

as a command index.

Low-End and Mid-Range Series Routers

Interface Card and Interface Module

Manual

This manual covers all interface cards

and modules available with H3C AR

Series Routers, including the cable

pinouts, function, interface attribute,

panels and LEDs.

LMR Series Routers Cable Manual This manual introduces all cable pinouts

available with LMR series routers.

Organization

H3C AR 46 Series Routers Installation Manual is organized as follows:

Chapter Contents

1 Router Overview Introduces models, features and

supported generic modules of AR 46

Series Routers.

Chapter Contents

2 Preparing for Installation Introduces requirements on

environment and precautions for

installing the Router and tools needed.

3 Installing the Router

Introduces how to install the Router and

how to connect power cord, console

cable, backup interface cable and

Ethernet cable.

4 Starting and Configuring the Router

Introduces startup and configuration

fundamentals of the Router, including

how to start and power on the Router

and how to initialize system files and

arrange slots.

5 Maintaining Software Introduces Boot ROM menu

maintenance and software

maintenance.

6 Maintaining Hardware Introduces removing/installing of PSUs,

Fan Module, Main Control Board and

replacing of SDRAM.

7 Troubleshooting Introduces problems and checkup

methods when installing and starting the

Router and maintaining software.

Conventions

The manual uses the following conventions:

I. Command conventions

Convention Description

Boldface The keywords of a command line are in Boldface.

italic Command arguments are in italic.

[ ] Items (keywords or arguments) in square brackets [ ] are

optional.

{ x | y | ... }

Alternative items are grouped in braces and separated by

vertical bars. One is selected.

[ x | y | ... ]

Optional alternative items are grouped in square brackets

and separated by vertical bars. One or none is selected.

Convention Description

{ x | y | ... } *

Alternative items are grouped in braces and separated by

vertical bars. A minimum of one or a maximum of all can be

selected.

[ x | y | ... ] *

Optional alternative items are grouped in square brackets

and separated by vertical bars. Many or none can be

selected.

&<1-n> The argument(s) before the ampersand (&) sign can be

entered 1 to n times.

# A line starting with the # sign is comments.

II. GUI conventions

Convention Description

Boldface Window names, button names, field names, and menu

items are in Boldface. For example, the New User window

appears; click OK.

> Multi-level menus are separated by angle brackets. For

example, File > Create > Folder.

Convention Description

< > Button names are inside angle brackets. For example, click

<OK>.

[ ] Window names, menu items, data table and field names

are inside square brackets. For example, pop up the [New

User] window.

/ Multi-level menus are separated by forward slashes. For

example, [File/Create/Folder].

III. Symbols

Convention Description

Warning Means reader be extremely careful. Improper operation

may cause bodily injury.

Caution Means reader be careful. Improper operation may cause

data loss or damage to equipment.

Note Means a complementary description.

Environmental Protection

This product has been designed to comply with the requirements on environmental

protection. For the proper storage, use and disposal of this product, national laws and

regulations must be observed.

H3C AR 46 Series Routers Installation Manual Table of Contents

Table of Contents

Chapter 1 Router Overview ..........................................................................................................1-1

1.1 Introduction ........................................................................................................................ 1-1

1.2 Router Model and Structure............................................................................................... 1-3

1.2.1 AR 46-20 ................................................................................................................. 1-3

1.2.2 AR 46-40 ................................................................................................................. 1-4

1.2.3 AR 46-80 ................................................................................................................. 1-5

1.3 System Description............................................................................................................ 1-6

1.4 Generic Modules................................................................................................................ 1-6

1.4.1 RPU......................................................................................................................... 1-7

1.4.2 ERPU .................................................................................................................... 1-10

1.4.3 ERPU (H) .............................................................................................................. 1-14

1.4.4 PSU ....................................................................................................................... 1-17

1.4.5 FAN module .......................................................................................................... 1-18

1.4.6 FICs....................................................................................................................... 1-19

H3C AR 46 Series Routers Installation Manual Chapter 1 Router Overview

1-1

Chapter 1 Router Overview

1.1 Introduction

H3C AR 46 Series Routers are next generation high-performance edge routers that

H3C Technology solely developed. They provide high forwarding performance and a

broad service range. The series supports flexible interface cards (FICs), hot swappable

fan modules and power supply units (PSUs) in 1+1 redundancy. Along with the NE

Series Routers, the AR 46 series provides complete network solutions for service

providers and enterprises.

The following are the major features of the AR 46 series.

I. Abundant FIC options

The H3C AR 46 series are available with a wide range of FICs. This allows for great

flexibility and thus protects user investment.

II. Ethernet access

The electrical and fiber (multi-mode and single-mode) Ethernet FICs support PPPoE

and PPPoEoA, and can offer authentication, authorization, and accounting (AAA)

services for Ethernet access. These cards are suitable for providing broadband access,

for example, for government agencies and enterprises.

III. ATM and DSL

Digital subscriber line (DSL) is a simple but highly efficient broadband technology which

achieves great data transmission capacity over existing copper wiring by using the

digital code modulation technology. Installed with an ADSL or G.HSDSL card, the AR 46

series can connect medium-to-small-sized enterprises to digital subscriber line access

multiplexer (DSLAM) equipment across a public switched telephone network (PSTN) to

the Internet.

Asynchronous transfer mode (ATM) transmits, multiplexes, and switches information in

cells. In addition to DSL cards, the AR 46 series is available with these ATM cards: 25

Mbps, 155 Mbps, E3/T3, and IMA-E1/T1. The cards support ATM adaptation layer type

5 (AAL5) and offer traffic services such as constant bit rate (CBR), variable bit rate

(VBR) and unspecified bit rate (UBR). They are well-suited to transfer large packets

and provide high-speed data services. A small to medium-sized enterprise can use

them to connect its network to an ATM network.

IV. MPLS

Multiprotocol label switching (MPLS), a combination of IP and ATM technologies,

replaces the IP header with a short and length-fixed label as traffic identifier, based on

H3C AR 46 Series Routers Installation Manual Chapter 1 Router Overview

1-2

which each router makes forwarding decision. It thus provides faster forwarding speed,

gets support from IP routing and control protocols, and accommodates to emerging

applications. In an MPLS network, labeled packets are transmitted along a label

switched path (LSP) formed by label switching routers. As an LSP is virtually a tunnel

across the public network, MPLS has an intrinsic advantage in terms of VPN

implementation. The AR 46 series usually acts as label edge routers (LERs) to connect

an MPLS domain with a non-MPLS domain or connect MPLS domains of different

service providers, implementing service classification, label distribution, encapsulation,

and multi-label peel-off.

V. Data security and reliability

The following are the data security and reliability features that the AR 46 series

supports:

zNAT. Besides some basic functions, NAT can limit concurrent connections to a

single user, and thus alleviate negative impact caused by malicious resources

occupation without affecting the normal network applications. In addition, NAT of

the AR 46 series also provides the application layer gateway (ALG) function

specific to FTP and ICMP.

zIdentity authentication protocols such as PAP, CHAP, data RADIUS, VoIP

RADIUS, and TACACS.

zPacket filter and application specific packet filter (ASPF), which fend off external

attacks.

zVPN (including GRE, L2TP, DVPN, and MPLS L2/L3 VPN) and the technologies

of IPSec and IKE. They can ensure security of private networks in an Internet

environment.

zBackup center and virtual router redundancy protocol (VRRP). By providing a

backup scheme in case of communication line or device failures, they enhance

robustness and reliability of networks. Backup center also supports backup load

sharing.

zHot swappable fans, interface cards, and PSUs to ensure high reliability.

VI. Online software upgrading

You are allowed to upgrade application and Boot ROM programs, and add new

features and functions on line as needed.

VII. Abundant fault isolation methods

zYou are available with the means to monitor the states of system configurations,

system service channels, and system resources, as well as fault indication via

console and network management host. In addition, logging function is provided

for recording and outputting the abnormal information.

zYou are allowed to monitor the FIC running state and make the judgment by

observing the LEDs on FIC panels.

H3C AR 46 Series Routers Installation Manual Chapter 1 Router Overview

1-3

zYou are also provided with the functions of in-service system test, out-of-service

system test. In addition, loopback test and hardware key module self-test are

allowed.

VIII. Regulatory compliance

The AR 46 Series Routers are designed in compliance with the regulations and

standards of China, North America, Europe, Europe, Australia, and Japan in EMC,

safety, network access, and some other aspects.

1.2 Router Model and Structure

The H3C AR 46 series includes AR 46-20, AR 46-40, and AR 46-80. These three

models are similar in chassis structure and layout. All of them use a mid-backplane

allowing front and rear card insertion and can be mounted in 19-inch standard racks.

The following subsections will give you more details about these three models.

1.2.1 AR 46-20

1) Slot0 for the main control board 2) FIC Slot1

3) FIC Slot2 4) ESD-preventive wrist strap port

Figure 1-1 Front panel of the AR 46-20

1) Fan module 2) Grounding screw 3) ESD-preventive wrist strap port

4) PSU 1 (PWR1) 5) PSU 2 (PWR2)

Figure 1-2 Rear panel of the AR 46-20

Inhaltsverzeichnis

Andere H3C Netzwerk-Router Handbücher

H3C

H3C SR6600 SPE-FWM Bedienungsanleitung

H3C

H3C S5500-EI series Bedienungsanleitung

H3C

H3C CR16000-F Bedienungs- und Wartungshandbuch

H3C

H3C s5820x series Bedienungsanleitung

H3C

H3C S5510 Series Bedienungsanleitung

H3C

H3C S1016 Bedienungsanleitung

H3C

H3C MSR 50 Series Handbuch

H3C

H3C H3C S7500E Series Bedienungsanleitung

H3C

H3C S7500 Series Bedienungsanleitung

H3C

H3C SR8800-X-S Bedienungs- und Wartungshandbuch

H3C

H3C S5120-EI Series Bedienungsanleitung

H3C

H3C S12516CR Bedienungs- und Wartungshandbuch

H3C

H3C CR16000-M Bedienungsanleitung

H3C

H3C MSR810 Installationshandbuch

H3C

H3C S12500R Series Bedienungs- und Wartungshandbuch

H3C

H3C CR16000-F Bedienungsanleitung

H3C

H3C MSR 800 Bedienungs- und Wartungshandbuch

H3C

H3C H3C S7500E Series Bedienungsanleitung

H3C

H3C MSR 930 Bedienungsanleitung

H3C

H3C MSR5620 Bedienungsanleitung

H3C

H3C H3C MSR 30-20 ROUTER Bedienungsanleitung

H3C

H3C AR19 Series Bedienungsanleitung

H3C

H3C SR6600 SPE-FWM Bedienungsanleitung

H3C

H3C MSR 900 Series Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise