H3C CR16000-F Bedienungsanleitung

H3C CR16000-F Routers

Comware 7 OAA Command Reference

New H3C Technologies Co., Ltd.

http://www.h3c.com

Software version: CR16000-CMW710-R7951P01 or later

Document version: 6W100-20191122

No part of this manual may be reproduced or transmitted in any form or by any means without prior written

consent of New H3C Technologies Co., Ltd.

Trademarks

Except for the trademarks of New H3C Technologies Co., Ltd., any trademarks that may be mentioned in this

document are the property of their respective owners.

Notice

The information in this document is subject to change without notice. All contents in this document, including

statements, information, and recommendations, are believed to be accurate, but they are presented without

warranty of any kind, express or implied. H3C shall not be liable for technical or editorial errors or omissions

contained herein.

Preface

This command reference describes the commands of OAA.

This preface includes the following topics about the documentation:

•Audience.

•Conventions.

•Documentation feedback.

Audience

This documentation is intended for:

•Network planners.

•Field technical support and servicing engineers.

•Network administrators working with the routers.

Conventions

The following information describes the conventions used in the documentation.

Command conventions

Convention Description

Boldface Bold text represents commands and keywords that you enter literally as shown.

Italic Italic text represents arguments that you replace with actual values.

[ ] Square brackets enclose syntax choices (keywords or arguments) that are optional.

{ x | y | ... }

Braces enclose a set of required syntax choices separated by vertical bars, from which

you select one.

[ x | y | ... ]

Square brackets enclose a set of optional syntax choices separated by vertical bars,

from which you select one or none.

{ x | y | ... } *

Asterisk marked braces enclose a set of required syntax choices separated by vertical

bars, from which you select a minimum of one.

[ x | y | ... ] *

Asterisk marked square brackets enclose optional syntax choices separated by vertical

bars, from which you select one choice, multiple choices, or none.

&<1-n> The argument or keyword and argument combination before the ampersand (&) sign

can be entered 1 to n times.

# A line that starts with a pound (#) sign is comments.

GUI conventions

Convention Description

Boldface Window names, button names, field names, and menu items are in Boldface. For

example, the New User window opens; click OK.

> Multi-level menus are separated by angle brackets. For example, File > Create >

Folder.

Symbols

Convention Description

WARNING! An alert that calls attention to important information that if not understood or followed

can result in personal injury.

CAUTION: An alert that calls attention to important information that if not understood or followed

can result in data loss, data corruption, or damage to hardware or software.

IMPORTANT: An alert that calls attention to essential information.

NOTE: An alert that contains additional or supplementary information.

TIP: An alert that provides helpful information.

Network topology icons

Convention Description

Represents a generic network device, such as a router, switch, or firewall.

Represents a routing-capable device, such as a router or Layer 3 switch.

Represents a generic switch, such as a Layer 2 or Layer 3 switch, or a router that

supports Layer 2 forwarding and other Layer 2 features.

Represents an access controller, a unified wired-WLAN module, or the access

controller engine on a unified wired-WLAN switch.

Represents an access point.

Represents a wireless terminator unit.

Represents a wireless terminator.

Represents a mesh access point.

Represents omnidirectional signals.

Represents directional signals.

Represents a security product, such as a firewall, UTM, multiservice security

gateway, or load balancing device.

Represents a security module, such as a firewall, load balancing, NetStream, SSL

VPN, IPS, or ACG module.

Examples provided in this document

Examples in this document might use devices that differ from your device in hardware model,

configuration, or software version. It is normal that the port numbers, sample output, screenshots,

and other information in the examples differ from what you have on your device.



Documentation feedback

You can e-mail your comments about product documentation to info@h3c.com.

We appreciate your comments.

Contents

OAP module commands····································································1

oap connect······························································································································1

oap reboot································································································································1

OAP module commands

oap connect

Use oap connect to log in to the CLI of an OAP module from the device. You can also use this

command to log in to another operating system that is running on a card in the device.

Syntax

In standalone mode:

oap connect slot slot-number

In IRF mode:

oap connect chassis chassis-number slot slot-number

Views

User view

Predefined user roles

network-admin

Parameters

slot slot-number: Specifies an OAP module by its slot number. (In standalone mode.)

chassis chassis-number slot slot-number: Specifies an OAP module in an IRF member

device by the member ID and slot number. (In IRF mode.)

Usage guidelines

To return to the CLI of the hosting device from the OAP module, press Ctrl+K.

Examples

# (In standalone mode.) Log in to the CLI of the OAP module in a slot.

<Sysname> oap connect slot 3

Press CTRL+K to quit.

Connected to OAP.

oap reboot

Use oap reboot to reboot an OAP module.

Syntax

In standalone mode:

oap reboot slot slot-number

In IRF mode:

oap reboot chassis chassis-number slot slot-number

Views

User view

Predefined user roles

network-admin

Parameters

slot slot-number: Specifies an OAP module by its slot number. (In standalone mode.)

chassis chassis-number slot slot-number: Specifies an OAP module in an IRF member

device by the member ID and slot number. (In IRF mode.)

Examples

# (In standalone mode.) Reboot the OAP module in a slot.

<Sysname> oap reboot slot 3

This command might cause data loss on the hard disk if the card is not been shut down.

Continue? [Y/N]:y

Rebooting the OAP card by command…

Contents

OAP manager commands··································································1

display oap client info···········································································································1

display oap client summary ···································································································2

oap client close···················································································································3

oap client reboot ·················································································································3

oap enable·························································································································4

oap timer clock-sync ············································································································5

oap timer monitor ················································································································5

OAP manager commands

display oap client info

Use display oap client info to display OAP client information.

Syntax

display oap client info [client-id ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

client-id: Specifies an OAP client by its ID in the range of 1 to 255. If you do not specify this

argument, the command displays information about all OAP clients in ascending order of client IDs.

Client IDs are assigned by the OAP manager to OAP clients to uniquely identify the clients.

Usage guidelines

The OAP manager obtains OAP client information from notification packets received from OAP

clients. If the information about a field is missing, the field is not displayed.

Examples

# Display information about OAP client 1.

<Sysname> display oap client info 1

Client ID: 1

CPU: Intel(R) Pentium(R) M processor 1.40GHz

PCB Version: 3.00

CPLD Version: 1.00

Bootrom Version: 1.12

Storage Card: 256 MB

Memory: 512 MB

Harddisk: 40.0 GB

# Display information about all OAP clients.

<Sysname> display oap client info

Client ID: 1

CPU: Intel(R) Pentium(R) M processor 1.40GHz

PCB Version: 3.00

CPLD Version: 1.00

Bootrom Version: 1.12

Storage Card: 256 MB

Memory: 512 MB

Harddisk: 40.0 GB

Client ID: 2

CPU: Intel(R) Pentium(R) M processor 1.40GHz

Andere Handbücher für CR16000-F

Inhaltsverzeichnis

Andere H3C Netzwerk-Router Handbücher

H3C

H3C S3100-52P Bedienungsanleitung

H3C

H3C MSR 20-20 Bedienungsanleitung

H3C

H3C MSR 20 Series Bedienungsanleitung

H3C

H3C MSR810 Bedienungsanleitung

H3C

H3C S3100-52P Bedienungsanleitung

H3C

H3C H3C S7500E-X Installationshandbuch

H3C

H3C MSR 5600 Bedienungs- und Wartungshandbuch

H3C

H3C S12500R Series Anwendungshandbuch

H3C

H3C S9500 Series Bedienungsanleitung

H3C

H3C WA6126 Bedienungsanleitung

H3C

H3C SR6604 Bedienungsanleitung

H3C

H3C MSR 30-16 Bedienungsanleitung

H3C

H3C H3C S7503 S7506 AND S7506R SWITCH Bedienungsanleitung

H3C

H3C S3100-52P Montageanleitung

H3C

H3C MSR 20 Series Bedienungsanleitung

H3C

H3C SR6616 Bedienungsanleitung

H3C

H3C CR1606-F Bedienungsanleitung

H3C

H3C S3610 Series Montageanleitung

H3C

H3C MSR2600-6-X1-GL Bedienungsanleitung

H3C

H3C MSR 5660 Gebrauchs- und Pflegehandbuch

H3C

H3C AR 18-22-24 Bedienungsanleitung

H3C

H3C S5510 Series Bedienungsanleitung

H3C

H3C MSR Series Installationshandbuch

H3C

H3C S12500R Series Bedienungs- und Wartungshandbuch

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung