H3C S5510 Series Bedienungsanleitung

H3C S5510 Series Ethernet Switches

Installation Manual

Hangzhou H3C Technologies Co., Ltd.

http://www.h3c.com

Manual Version: T2-20080228-C-1.05

No part of this manual may be reproduced or transmitted in any form or by any means

without prior written consent of Hangzhou H3C Technologies Co., Ltd.

Trademarks

H3C, , Aolynk, , H3Care,

, TOP G, , IRF, NetPilot,

Neocean, NeoVTL, SecPro, SecPoint, SecEngine, SecPath, Comware, Secware,

Storware, NQA, VVG, V2G, VnG, PSPT, XGbus, N-Bus, TiGem, InnoVision and

HUASAN are trademarks of Hangzhou H3C Technologies Co., Ltd.

All other trademarks that may be mentioned in this manual are the property of their

respective owners.

Notice

The information in this document is subject to change without notice. Every effort has

been made in the preparation of this document to ensure accuracy of the contents, but

all statements, information, and recommendations in this document do not constitute

the warranty of any kind, express or implied.

To obtain the latest information, please access:

http://www. h3c.com

Technical Support

customer_service@h3c.com

http://www. h3c.com

About This Manual

Related Documentation

In addition to this manual, each H3C S5510 Series Ethernet Switches documentation

set includes the following:

Manual Description

H3C S3610&S5510 Series Ethernet

Switches Operation Manual It is used for assisting the users in data

configurations and typical applications.

H3C S3610&S5510 Series Ethernet

Switches Command Manual It is used for assisting the users in using

various commands.

Organization

H3C S5510 Series Ethernet Switches Installation Manual is organized as follows:

Chapter Contents

1 Product Overview Introduces the characteristics and

technical specifications of S5510 Series

Ethernet Switches.

2 Installation Preparation Introduces the installation preparation

and precaution of S5510 Series

Ethernet Switches.

3 Installing the Switch

Introduces the procedures to install an

S5510 Series Ethernet Switch, including

the setup of the mainframe, cards and

cables.

4 Starting up the Switch at the Initial

Boot

Introduces the booting process of an

S5510 Series Ethernet Switch, including

the power-on booting of the switch and

the system initialization.

5 Loading Boot ROM and Host Software Introduces how to load Boot ROM and

host software for an S5510 Series

Ethernet Switch.

6 Maintenance and Troubleshooting

Introduces the problems that might

occur during the installation and the

booting of an S5510 Series Ethernet

Switch and the related solution.

Appendix A Lightning Protection of the

Switch Introduces lightning protection of S5510

Series Ethernet Switches.

Conventions

The manual uses the following conventions:

I. Command conventions

Convention Description

Boldface The keywords of a command line are in Boldface.

italic Command arguments are in italic.

[ ] Items (keywords or arguments) in square brackets [ ] are

optional.

{ x | y | ... }

Alternative items are grouped in braces and separated by

vertical bars. One is selected.

[ x | y | ... ]

Optional alternative items are grouped in square brackets

and separated by vertical bars. One or none is selected.

{ x | y | ... } *

Alternative items are grouped in braces and separated by

vertical bars. A minimum of one or a maximum of all can be

selected.

[ x | y | ... ] *

Optional alternative items are grouped in square brackets

and separated by vertical bars. Many or none can be

selected.

# A line starting with the # sign is comments.

II. GUI conventions

Convention Description

< > Button names are inside angle brackets. For example, click

<OK>.

[ ] Window names, menu items, data table and field names

are inside square brackets. For example, pop up the [New

User] window.

/ Multi-level menus are separated by forward slashes. For

example, [File/Create/Folder].

III. Symbols

Convention Description

Warning Means reader be extremely careful. Improper operation

may cause bodily injury.

Caution Means reader be careful. Improper operation may cause

data loss or damage to equipment.

Note Means a complementary description.

Environmental Protection

This product has been designed to comply with the requirements on environmental

protection. For the proper storage, use and disposal of this product, national laws and

regulations must be observed.

Andere Handbücher für S5510 Series

Inhaltsverzeichnis

Andere H3C Netzwerk-Router Handbücher

H3C

H3C H3C S7500E Series Installationshandbuch

H3C

H3C MSR 5600 Installationshandbuch

H3C

H3C RA10 Bedienungs- und Wartungshandbuch

H3C

H3C SR6600 SPE-FWM Bedienungsanleitung

H3C

H3C S5830V2 series Bedienungsanleitung

H3C

H3C MSR 20-1X Bedienungsanleitung

H3C

H3C SR6602 Bedienungsanleitung

H3C

H3C MSR3600-28 Bedienungsanleitung

H3C

H3C H3C S7503 S7506 AND S7506R SWITCH Bedienungsanleitung

H3C

H3C H3C S3600 Series Bedienungsanleitung

H3C

H3C SR6600 Series Bedienungsanleitung

H3C

H3C CR16000-F Bedienungsanleitung

H3C

H3C S12500R Series Bedienungsanleitung

H3C

H3C S3100 Series Montageanleitung

H3C

H3C SR6600 SPE-FWM Installationshandbuch

H3C

H3C S3610 Series Montageanleitung

H3C

H3C S3100-52P Bedienungsanleitung

H3C

H3C S1016 Bedienungsanleitung

H3C

H3C S12500R-2L Bedienungsanleitung

H3C

H3C CR16000-F Bedienungsanleitung

H3C

H3C S9500 Series Bedienungsanleitung

H3C

H3C S5120-SI Series Installationshandbuch

H3C

H3C MSR 2600 Series Bedienungsanleitung

H3C

H3C S12500CR Series Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise