H3C MSR 2600 Series Bedienungsanleitung

H3C MSR 2600 Routers

Installation Guide

New H3C Technologies Co., Ltd.

http://www.h3c.com.hk

Document version: 6W101-20170612

No part of this manual may be reproduced or transmitted in any form or by any means without prior

written consent of New H3C Technologies Co., Ltd.

Trademarks

H3C, , H3CS, H3CIE, H3CNE, Aolynk, , H3Care, , IRF, NetPilot, Netflow,

SecEngine, SecPath, SecCenter, SecBlade, Comware, ITCMM and HUASAN are trademarks of New

H3C Technologies Co., Ltd.

All other trademarks that may be mentioned in this manual are the property of their respective owners

Notice

The information in this document is subject to change without notice. Every effort has been made in the

preparation of this document to ensure accuracy of the contents, but all statements, information, and

recommendations in this document do not constitute the warranty of any kind, express or implied.

Environmental protection

This product has been designed to comply with the environmental protection requirements. The storage,

use, and disposal of this product must meet the applicable national laws and regulations.

Preface

The H3C MSR 2600 Routers Installation Guide includes seven chapters, which describe the preparing for

installation, installing the router, replacement procedure, troubleshooting, chassis views and technical

specifications, LEDs, and slot arrangement.

This preface includes the following topics about the documentation:

•Audience.

•Conventions.

•Obtaining documentation.

•Technical support.

•Documentation feedback.

Audience

This documentation is intended for:

•Network planners.

•Field technical support and servicing engineers.

•Network administrators working with the routers.

Conventions

The following information describes the conventions used in the documentation.

Command conventions

Convention Descri

tion

Boldface Bold text represents commands and keywords that you enter literally as shown.

Italic Italic text represents arguments that you replace with actual values.

[ ] Square brackets enclose syntax choices (keywords or arguments) that are optional.

{ x | y | ... }

Braces enclose a set of required syntax choices separated by vertical bars, from which

you select one.

[ x | y | ... ]

Square brackets enclose a set of optional syntax choices separated by vertical bars, from

which you select one or none.

{ x | y | ... } *

Asterisk marked braces enclose a set of required syntax choices separated by vertical

bars, from which you select a minimum of one.

[ x | y | ... ] *

Asterisk marked square brackets enclose optional syntax choices separated by vertical

bars, from which you select one choice, multiple choices, or none.

&<1-n> The argument or keyword and argument combination before the ampersand (&) sign can

be entered 1 to n times.

# A line that starts with a pound (#) sign is comments.

GUI conventions

Convention Descri

tion

Boldface Window names, button names, field names, and menu items are in Boldface. For

example, the New User window opens; click OK.

> Multi-level menus are separated by angle brackets. For example, File > Create > Folder.

Symbols

Convention Descri

tion

WARNING An alert that calls attention to important information that if not understood or followed can

result in personal injury.

CAUTION An alert that calls attention to important information that if not understood or followed can

result in data loss, data corruption, or damage to hardware or software.

IMPORTANT An alert that calls attention to essential information.

NOTE An alert that contains additional or supplementary information.

TIP An alert that provides helpful information.

Network topology icons

Represents a generic network device, such as a router, switch, or firewall.

Represents a routing-capable device, such as a router or Layer 3 switch.

Represents a generic switch, such as a Layer 2 or Layer 3 switch, or a router that supports

Layer 2 forwarding and other Layer 2 features.

Represents an access controller, a unified wired-WLAN module, or the access controller

engine on a unified wired-WLAN switch.

Represents an access point.

Wireless terminator unit.

Wireless terminator.

Represents a mesh access point.

Represents omnidirectional signals.

Represents directional signals.



Represents a security product, such as a firewall, UTM, multiservice security gateway, or

load balancing device.

Represents a security module, such as a firewall, load balancing, NetStream, SSL VPN,

IPS, or ACG module.

Examples provided in this document

Examples in this document might use devices that differ from your device in hardware model,

configuration, or software version. It is normal that the port numbers, sample output, screenshots, and

other information in the examples differ from what you have on your device.

Obtaining documentation

To access the most up-to-date H3C product documentation, go to the H3C website

at http://www.h3c.com.hk.

To obtain information about installation, configuration, and maintenance, click

http://www.h3c.com.hk/Technical_Documents

To obtain software version information such as release notes, click

http://www.h3c.com.hk/Software_Download

Technical support

servic[email protected]

http://www.h3c.com.hk

Documentation feedback

You can email your comments about product documentation to inf[email protected].

We appreciate your comments.



Contents

Preparing for installation ············································································································································· 1

Safety recommendations ··················································································································································1

Safety symbols ··························································································································································1

General safety recommendations···························································································································1

Electricity safety ························································································································································1

Examining the installation site ·········································································································································1

Temperature and humidity·······································································································································1

Cleanness··································································································································································2

Cooling system ·························································································································································2

ESD prevention ·························································································································································3

EMI·············································································································································································4

Lightning protection··················································································································································4

Rack-mounting···························································································································································4

Installation tools·································································································································································5

Installation accessories ·····················································································································································5

Pre-installation checklist ····················································································································································5

Installing the router······················································································································································· 8

Installation prerequisites ···················································································································································8

Installation flow ·································································································································································8

Installing the router on a workbench··················································································································· 10

Installing the router in a rack ······························································································································· 10

Installing the router on a wall······························································································································· 15

Grounding the router ····················································································································································· 16

Attaching the ring terminal··································································································································· 16

Grounding the router through the rack ··············································································································· 17

Grounding the router with a grounding strip ····································································································· 19

Grounding the router with a grounding conductor buried in the earth ground ············································· 19

Installing a 3G SIM card··············································································································································· 19

Installing a 3G antenna················································································································································· 21

Connecting a 3G/4G antenna extension cable to a 3G router ·············································································· 22

Installing a 4G SIM card··············································································································································· 23

Installing a 4G antenna················································································································································· 24

Connecting a 3G/4G antenna extension cable to a 4G router ·············································································· 25

Installing an interface module······································································································································· 26

Installing a SIC······················································································································································· 26

Installing a DSIC···················································································································································· 26

Connecting the router to the network··························································································································· 28

Logging in through the console port ···························································································································· 28

Connecting a console cable································································································································· 28

Setting terminal parameters·································································································································· 31

Connecting an AC power cord ···································································································································· 34

Verifying the installation················································································································································ 35

Starting the router··························································································································································· 35

Replacement procedures ···········································································································································38

Replacing a SIC ····························································································································································· 38

Replacing a DSIC··························································································································································· 38

Troubleshooting··························································································································································40

Power supply system failure·········································································································································· 40

Fan failure······································································································································································· 40

Configuration terminal problems·································································································································· 41

No terminal display ·············································································································································· 41

Garbled terminal display······································································································································ 41

No response from the serial port························································································································· 41

Interface module, cable, and connection failure ········································································································ 42

Symptom································································································································································· 42

Solution··································································································································································· 42

3G/4G SIM card and 3G/4G antenna failures ······································································································· 42

Restoring the factory settings ········································································································································ 43

Scenario 1······························································································································································ 43

Scenario 2······························································································································································ 43

Scenario 3······························································································································································ 43

Reset button usage guidelines······························································································································ 43

Appendix A Chassis views and technical specifications ························································································44

Chassis views ································································································································································· 44

MSR 26-30····························································································································································· 44

MSR 26-00-5-GU-CNDE······································································································································· 45

MSR 26-00-5-GT-CNDE········································································································································ 45

MSR 26-00-5-LM-CNDE········································································································································ 46

MSR 26-00-10 ······················································································································································· 47

MSR 26-00-17 ······················································································································································· 47

Technical specifications················································································································································· 48

4G antenna specifications ············································································································································ 49

3G antenna specifications ············································································································································ 50

Appendix B LEDs························································································································································51

LEDs ················································································································································································· 51

LED description······························································································································································· 54

Appendix C Slot arrangement ··································································································································56

Index ···········································································································································································57

Preparing for installation

Safety recommendations

Safety symbols

When reading this document, note the following symbols:

WARNING means an alert that calls attention to important information that if not understood or

followed can result in personal injury.

CAUTION means an alert that calls attention to important information that if not understood or

followed can result in data loss, data corruption, or damage to hardware or software.

General safety recommendations

•Keep the chassis and installation tools away from walk areas.

•Make sure the ground is dry and flat and anti-slip measures are in place.

•Unplug all the external cables (including the power cord) before moving the chassis.

Electricity safety

•Locate the emergency power-off switch in the room before installation. Shut the power off at once in

case accident occurs. Disconnect the power cord of the router if necessary.

•Make sure the router is correctly grounded.

•Do not open or close the chassis cover when the router is powered on.

•Correctly connect the interface cables of the router.

•Use an uninterrupted power supply (UPS).

•Do not work alone when the router has power.

•Always make sure the power has been disconnected during the installation and replacement

procedures.

Examining the installation site

The router can only be used indoors. To make sure the router operates correctly and to prolong its service

lifetime, the installation site must meet the following requirements.

Temperature and humidity

You must maintain a proper temperature and humidity in the equipment room.

•Lasting high relative humidity tends to cause poor insulation, electricity creepage, mechanical

property change of materials, and corrosion of metal parts.

•Lasting low relative humidity is likely to result in loose screws due to washer contraction, and even

ESD, which causes the circuits to fail.

•A high temperature is the most undesirable condition, because it accelerates the aging of insulation

materials and significantly lowers reliability and service life of the router.

For the temperature and humidity requirements of the router, see Table 1.

Table 1 Temperature and humidity requirements

Tem

erature Humidit

0°C to 45°C (32°F to 113°F) 5% to 90% (noncondensing)

Cleanness

Dust buildup on the chassis might result in electrostatic adsorption, which causes poor contact of metal

components and contact points, especially when indoor relative humidity is low. In the worst case,

electrostatic adsorption can cause communication failure.

Table 2 Dust concentration limit in the equipment room

Substance Concentration limit (

articles/m3)

Dust particles ≤3 x 104

(No visible dust on desk in three days.)

NOTE:

Dust particle diameter ≥5 μm

The equipment room must also meet limits on salts, acids, and sulfides to eliminate corrosion and

premature aging of components, as shown in Table 3.

Table 3 Harmful gas limits in the equipment room

Gas Max. (m

/m3)

SO20.2

H2S 0.006

NH30.05

Cl20.01

Cooling system

The router adopts left to right airflow for heat dissipation.

Figure 1 Airflow through the chassis

To ensure good ventilation, the following requirements must be met:

•The inlet and outlet air vents are not blocked, and leave at least 10 cm (3.94 in) of clearance.

•The installation site has a good cooling system.

ESD prevention

CAUTION:

Check the resistance of the ESD wrist strap for safety. The resistance readin

should be in the ran

e of 1

to 10 megohm (Mohm) between human body and the ground.

To prevent electrostatic discharge (ESD), follow these guidelines:

•Make sure the router and the floor are correctly grounded.

•Take dust-proof measures for the equipment room.

•Maintain the humidity and temperature at acceptable levels.

•Always wear an ESD wrist strap and ESD cloth when touching a circuit board or transceiver module.

The router does not supply an ESD wrist wrap. Prepare an ESD wrist wrap yourself.

•Place the removed interface module on an antistatic workbench, with the face upward, or put it into

an antistatic bag.

•Touch only the edges, instead of electronic components when you observe or move a removed

interface module.

To attach an ESD wrist strap:

1. Wear the wrist strap on your wrist.

2. Lock the wrist strap tight around your wrist to keep good contact with the skin.

3. Insert the ESD plug into the ESD socket.

4. Make sure the rack is correctly grounded.

Andere Handbücher für MSR 2600 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere H3C Netzwerk-Router Handbücher

H3C

H3C S5120-EI Series Bedienungsanleitung

H3C

H3C SecPath F5010 Bedienungs- und Wartungshandbuch

H3C

H3C MSR810 Installationshandbuch

H3C

H3C S12500R Series Bedienungs- und Wartungshandbuch

H3C

H3C S5500-SI Series Bedienungsanleitung

H3C

H3C S3100-52P Bedienungsanleitung

H3C

H3C SR8800 IM-FW-II Bedienungsanleitung

H3C

H3C H3C MSR 30-20 ROUTER Bedienungsanleitung

H3C

H3C SR6600 SPE-FWM Installationshandbuch

H3C

H3C MSR 900 Series Bedienungsanleitung

H3C

H3C CR16000-F Bedienungsanleitung

H3C

H3C CR19000-20 Bedienungsanleitung

H3C

H3C H3C S7500E Series Bedienungsanleitung

H3C

H3C H3C S3600 Series Montageanleitung

H3C

H3C S3100-52P Bedienungsanleitung

H3C

H3C S5510 Series Bedienungsanleitung

H3C

H3C S5500-SI Series Bedienungsanleitung

H3C

H3C RA5300 Bedienungsanleitung

H3C

H3C MSR 5600 Bedienungsanleitung

H3C

H3C MSR 5600 Bedienungsanleitung

H3C

H3C S9500 Series Bedienungsanleitung

H3C

H3C RA100 Bedienungsanleitung

H3C

H3C SR6604-X Bedienungs- und Wartungshandbuch

H3C

H3C MSR 30-16 Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise