H3C MSR900-E Series Bedienungsanleitung

H3C MSR900-E Routers

Installation Guide

New H3C Technologies Co., Ltd.

http://www.h3c.com.hk

Document version: 6W102-20170613

No part of this manual may be reproduced or transmitted in any form or by any means without prior

written consent of New H3C Technologies Co., Ltd.

Trademarks

H3C, , H3CS, H3CIE, H3CNE, Aolynk, , H3Care, , IRF, NetPilot, Netflow,

SecEngine, SecPath, SecCenter, SecBlade, Comware, ITCMM and HUASAN are trademarks of New

H3C Technologies Co., Ltd.

All other trademarks that may be mentioned in this manual are the property of their respective owners

Notice

The information in this document is subject to change without notice. Every effort has been made in the

preparation of this document to ensure accuracy of the contents, but all statements, information, and

recommendations in this document do not constitute the warranty of any kind, express or implied.

Environmental protection

This product has been designed to comply with the environmental protection requirements. The storage,

use, and disposal of this product must meet the applicable national laws and regulations.

Preface

The H3C MSR900-E Routers Installation Guide includes five chapters, which describe the preparing for

installation, installing the router, troubleshooting, chassis views and technical specifications, and LEDs.

This preface includes the following topics about the documentation:

•Audience.

•Conventions.

•Obtaining documentation.

•Technical support.

•Documentation feedback.

Audience

This documentation is intended for:

•Network planners.

•Field technical support and servicing engineers.

•Network administrators working with the MSR900-E Routers

Conventions

The following information describes the conventions used in the documentation.

Command conventions

Convention Descri

tion

Boldface Bold text represents commands and keywords that you enter literally as shown.

Italic Italic text represents arguments that you replace with actual values.

[ ] Square brackets enclose syntax choices (keywords or arguments) that are optional.

{ x | y | ... }

Braces enclose a set of required syntax choices separated by vertical bars, from which

you select one.

[ x | y | ... ]

Square brackets enclose a set of optional syntax choices separated by vertical bars, from

which you select one or none.

{ x | y | ... } *

Asterisk marked braces enclose a set of required syntax choices separated by vertical

bars, from which you select a minimum of one.

[ x | y | ... ] *

Asterisk marked square brackets enclose optional syntax choices separated by vertical

bars, from which you select one choice, multiple choices, or none.

&<1-n> The argument or keyword and argument combination before the ampersand (&) sign can

be entered 1 to n times.

# A line that starts with a pound (#) sign is comments.

GUI conventions

Convention Descri

tion

Boldface Window names, button names, field names, and menu items are in Boldface. For

example, the New User window opens; click OK.

> Multi-level menus are separated by angle brackets. For example, File > Create > Folder.

Symbols

Convention Descri

tion

WARNING An alert that calls attention to important information that if not understood or followed can

result in personal injury.

CAUTION An alert that calls attention to important information that if not understood or followed can

result in data loss, data corruption, or damage to hardware or software.

IMPORTANT An alert that calls attention to essential information.

NOTE An alert that contains additional or supplementary information.

TIP An alert that provides helpful information.

Network topology icons

Represents a generic network device, such as a router, switch, or firewall.

Represents a routing-capable device, such as a router or Layer 3 switch.

Represents a generic switch, such as a Layer 2 or Layer 3 switch, or a router that supports

Layer 2 forwarding and other Layer 2 features.

Represents an access controller, a unified wired-WLAN module, or the access controller

engine on a unified wired-WLAN switch.

Represents an access point.

Wireless terminator unit.

Wireless terminator.

Represents a mesh access point.

Represents omnidirectional signals.

Represents directional signals.



Represents a security product, such as a firewall, UTM, multiservice security gateway, or

load balancing device.

Represents a security module, such as a firewall, load balancing, NetStream, SSL VPN,

IPS, or ACG module.

Examples provided in this document

Examples in this document might use devices that differ from your device in hardware model,

configuration, or software version. It is normal that the port numbers, sample output, screenshots, and

other information in the examples differ from what you have on your device.

Obtaining documentation

To access the most up-to-date H3C product documentation, go to the H3C website

at http://www.h3c.com.hk.

To obtain information about installation, configuration, and maintenance, click

http://www.h3c.com.hk/Technical_Documents

To obtain software version information such as release notes, click

http://www.h3c.com.hk/Software_Download

Technical support

servic[email protected]

http://www.h3c.com.hk

Documentation feedback

You can email your comments about product documentation to inf[email protected].

We appreciate your comments.



Contents

Preparing for installation ············································································································································· 1

Safety recommendations ··················································································································································1

Examining the installation site ·········································································································································1

Temperature and humidity·······································································································································1

Cleanliness ································································································································································1

Cooling system ·························································································································································2

ESD prevention ·························································································································································2

EMI·············································································································································································2

Lightning protection··················································································································································3

Installation accessories and tools ····································································································································3

Pre-installation checklist ····················································································································································4

Installing the router······················································································································································· 5

Installation prerequisites ···················································································································································5

Installation flow ·································································································································································5

Mounting the router on a workbench·····················································································································6

Installing the router on a wall··································································································································7

Installing the router in a rack ··································································································································8

Grounding the router ····················································································································································· 10

Attaching the ring terminal··································································································································· 11

Grounding the router through the rack ··············································································································· 11

Grounding the router with a grounding strip ····································································································· 13

Grounding the router with a grounding conductor buried in the earth ground ············································· 14

Installing a WLAN antenna·································································································································· 14

Connecting interface cables ········································································································································· 15

Connecting an Ethernet cable······························································································································ 15

Connecting optical fibers ····································································································································· 16

Connecting USB devices······································································································································· 16

Connecting a console cable and setting terminal parameters·················································································· 17

Connecting a console cable································································································································· 17

Setting terminal parameters·································································································································· 18

Connecting the power cord ·········································································································································· 18

Verifying the installation················································································································································ 19

Powering on the router ·················································································································································· 19

Displaying boot information································································································································· 19

Checking after power-on ······································································································································ 21

Configuring basic settings for the router············································································································· 21

Troubleshooting··························································································································································22

Power supply failure ······················································································································································ 22

System configuration problems····································································································································· 22

No terminal display ·············································································································································· 22

Garbled terminal display······································································································································ 23

No response from the serial port························································································································· 23

Restoring the factory settings ········································································································································ 23

Scenario 1······························································································································································ 23

Scenario 2······························································································································································ 24

Scenario 3······························································································································································ 24

Reset button usage guidelines······························································································································ 24

Appendix A Chassis views and technical specifications ························································································25

Chassis views ································································································································································· 25

MSR900-E ······························································································································································ 25

MSR900-E-W ························································································································································· 26

Technical specifications················································································································································· 26

Antenna specifications··················································································································································· 27

Appendix B LEDs························································································································································28

LEDs ················································································································································································· 28

LED description······························································································································································· 29

Index ···········································································································································································30

Preparing for installation

Safety recommendations

ARNING!

Before installation and operation, read all of the safety instructions in

Compliance and Safety Guide

supplied with your router.

Follow these general safety recommendations:

•Turn off all power and remove all power cables before opening the chassis.

•Unplug all power and external cables before moving the chassis.

•Before installation, locate the emergency power switch so that you can shut off power

immediately if necessary.

•Always wear an ESD wrist strap when installing the router.

•Do not stare into an open optical interface. The light can cause permanent eye damage.

•Use a good grounding system. This is essential for reliable operation.

•Make sure the resistance reading between the chassis and the ground is less than 1 ohm.

Examining the installation site

The H3C MSR900-E router can only be used indoors. To ensure that the router can operate correctly

and prolong its service lifetime, the installation site must meet the following requirements.

Temperature and humidity

Table 1 Temperature and humidity requirements

Tem

erature Relative humidit

0°C to 40°C (32°F to 104°F) 5% to 90%

Cleanliness

Table 2 Dust concentration limit in the equipment room

Substance Concentration limit (

articles/m3)

Dust particles ≤3 x 104(No visible dust on desk in three days)

NOTE:

Dust particle diameter ≥5 μm

Table 3 Harmful gas concentration limits

Gas Max. (m

/m3)

SO20.2

H2S 0.006

NH30.05

Cl20.01

Cooling system

To ensure good ventilation, the installation site must meet the following requirements:

•A minimum clearance of 10 cm (3.94 in) is reserved at the inlet and outlet air vents.

•The site has an adequate cooling system.

ESD prevention

CAUTION:

Make sure the resistance reading between human body and the ground is in the range of 1 to 10

megohms (Mohms).

To prevent the electronic components from being damaged by ESD, follow these guidelines:

•Make sure the router and the floor are reliably grounded.

•Take dust-proof measures for the equipment room.

•Always wear an ESD wrist strap when touching a circuit board.

To attach an ESD wrist strap:

1. Wear the wrist strap on your wrist.

No wrist strap is supplied with the router. Prepare it yourself.

2. Lock the wrist strap tight around your wrist to keep good contact with the skin.

3. Secure the wrist strap lock and the alligator clip lock together.

4. Attach the alligator clip to the grounding terminal on the device.

EMI

EMI from any source adversely affects the router.

To prevent EMI, use the following guidelines:

•Use electromagnetic shielding when necessary.

•Take measures against interference from the power grid.

•Do not use the router together with the grounding or lightning-prevention equipment of power

equipment, and keep the router far away from them.

•Keep the router far away from radio transmitting stations, radar stations, and high-frequency

devices.

Lightning protection

To protect the router from lightning, use the following guidelines:

•Make sure the grounding cable of the chassis is grounded reliably.

•Make sure the grounding terminal of the AC power receptacle is grounded reliably.

•Install a lightning arrester at the input end of the power supply.

Installation accessories and tools

Figure 1 and Figure 2 list the accessories and tools required for installing the router.

Figure 1 Installation accessories

NOTE:

The type of the antenna that comes with the router depends on the router model.

Figure 2 User-supplied tools and equipment

Cage nut

(user-supplied)

Ring terminal

(provided)

M6 screw

(user-supplied)

M4 countersunk-head

screw

(provided)

Rubber feet

(provided)

Mounting brackets

(provided)

Grounding screw

(provided) Antenna

Screw anchor and

screw

(user-supplied)

Bail latch

Flathead screwdriver Phillips screwdriver Needle-nose pliers Wire-stripping pliers

ESD wrist strap Heat gun Drill

Claw hammer

MarkerDiagonal pliers

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere H3C Netzwerk-Router Handbücher

H3C

H3C MSR Series Bedienungsanleitung

H3C

H3C MSR 5600 Bedienungs- und Wartungshandbuch

H3C

H3C MSR 3600 Bedienungsanleitung

H3C

H3C SR6604-X Bedienungs- und Wartungshandbuch

H3C

H3C RA10 Bedienungsanleitung

H3C

H3C CR16000-FA Series Bedienungsanleitung

H3C

H3C MSR810 Installationshandbuch

H3C

H3C CR16000-F Bedienungsanleitung

H3C

H3C MSR5620 Bedienungsanleitung

H3C

H3C S5500-SI Series Bedienungsanleitung

H3C

H3C S3100 Series Montageanleitung

H3C

H3C H3C S5100-SI Bedienungsanleitung

H3C

H3C S3100-52P Bedienungsanleitung

H3C

H3C S3100-52P Bedienungsanleitung

H3C

H3C S7502 Bedienungsanleitung

H3C

H3C CR19000-20 Bedienungsanleitung

H3C

H3C S3100-52P Bedienungsanleitung

H3C

H3C RA200 Bedienungsanleitung

H3C

H3C S5500-EI series Bedienungsanleitung

H3C

H3C H3C S7500E Series Bedienungsanleitung

H3C

H3C SR6600 SPE-FWM Bedienungsanleitung

H3C

H3C SR6600 SPE-FWM Bedienungsanleitung

H3C

H3C SR8800-X Bedienungsanleitung

H3C

H3C SR8800-X-S Bedienungs- und Wartungshandbuch

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise