H3C H3C S5100-SI Bedienungsanleitung
H3C S5100-SI/EI Series
Ethernet Switches
Quick Start
Hangzhou H3C Technologies Co., Ltd.
http://www.h3c.com
Manual Version: T2-08018B-20070522-C-1.02
Copyright © 2007, Hangzhou H3C Technologies Co., Ltd.
and its licensors
All Rights Reserved
No part of this manual may be reproduced or transmitted in any form
or by any means without prior written consent of Hangzhou H3C
Technologies Co., Ltd.
Trademarks
H3C, , Aolynk, , H3Care,
, TOP G, , IRF,
NetPilot, Neocean, NeoVTL, SecPro, SecPoint, SecEngine, SecPath,
Comware, Secware, Storware, NQA, VVG, V2G, VnG, PSPT, XGbus,
N-Bus, TiGem, InnoVision and HUASAN are trademarks of Hangzhou
H3C Technologies Co., Ltd.
All other trademarks that may be mentioned in this manual are the
property of their respective owners.
Notice
The information in this document is subject to change without notice.
Every effort has been made in the preparation of this document to
ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute the warranty of
any kind, express or implied.
To obtain the latest information, please access:
http://www.h3c.com
Technical Support
customer_servic[email protected]
http://www.h3c.com
About This Manual
Related Documentation
In addition to this manual, each H3C S5100-SI/EI Series Ethernet
Switches documentation set includes the following:
Manual Content
H3C S5100-SI/EI Series
Ethernet Switches Operation
Manual
It is used for assisting the users
in data configurations and
typical applications
H3C S5100-SI/EI Series
Ethernet Switches Command
Manua
It is used for assisting the users
in using various commands.
H3C S5100-SI/EI Series
Ethernet Switches Installation
Manual
It is used for assisting the users
in switch installation, booting up,
hardware and software
maintenance.
Organization
H3C S5100-SI/EI Series Ethernet Switches Quick Start is
organized as follows:
Chapter Contents
1 Product Overview Introduces the characteristics and
technical specifications of S5100-SI/EI
Series Ethernet Switches.
Chapter Contents
2 Preparing for
Installation
Introduces the installation preparation and
precaution of S5100-SI/EI Series Ethernet
Switches.
3 Installing the Switch
Introduces the procedures to install an
S5100-SI/EI Series Ethernet Switch,
including the setup of the mainframe,
cards and cables.
4 Lightning Protection
of the Switch Introduces lightning protection of
S5100-SI/EI Series Ethernet Switches.
Conventions
The manual uses the following conventions:
I. GUI conventions
Convention Description
< > Button names are inside angle brackets.
For example, click <OK>.
[ ]
Window names, menu items, data table
and field names are inside square
brackets. For example, pop up the [New
User] window.
/ Multi-level menus are separated by forward
slashes. For example, [File/Create/Folder].
Symbols II.
Convention Description
Warning Means reader be extremely careful.
Improper operation may cause bodily
injury.
Caution
Means reader be careful. Improper
operation may cause data loss or damage
to equipment.
Note Means a complementary description.
Environmental Protection
This product has been designed to comply with the requirements
on environmental protection. For the proper storage, use and disposal
of this product, national laws and regulations must be observed.
Quick Start
H3C S5100-SI/EI Series Ethernet Switches Table of Contents
i
Table of Contents
Chapter 1 Product Overview ........................................................1-1
1.1 Preface...............................................................................1-1
1.2 LEDs ..................................................................................1-4
1.3 System Features of the S5100 Series ...............................1-8
1.3.1 System Features of the S5100-SI Series................1-8
1.3.2 System Features of the S5100-EI Series................1-9
1.4 Ordering SFP Interface Modules .....................................1-16
1.5 Ordering 10 G Stack Interface Modules ..........................1-18
1.6 Ordering Stack Cables.....................................................1-18
1.7 Ordering DC Power cords................................................1-19
Chapter 2 Preparing for Installation ............................................2-1
2.1 Safety Precautions.............................................................2-1
2.2 Installation Site...................................................................2-1
2.2.1 Temperature/Humidity.............................................2-2
2.2.2 Cleanness................................................................2-3
2.2.3 Electromagnetic Susceptibility.................................2-4
2.2.4 Safety in Use of Laser .............................................2-4
2.3 Installation Tools ................................................................2-5
Chapter 3 Installing the Switch....................................................3-1
3.1 Rack-Mounting the Switch .................................................3-1
3.1.1 Introduction to Mounting Ear ...................................3-3
3.1.2 Introduction to Guide Rail........................................3-6
3.1.3 Using Front Mounting Ears to Install a Switch ........3-6
Quick Start
H3C S5100-SI/EI Series Ethernet Switches Table of Contents
ii
3.1.4 Use Front Mounting Ears and a Tray ......................3-8
3.1.5 Use Front and Rear Mounting Ears.........................3-9
3.1.6 Use Front Mounting Ears and Guide Rails............3-13
3.2 Desk Mounting .................................................................3-16
3.3 Wall Mounting ..................................................................3-17
3.4 Magnet Mounting .............................................................3-20
3.5 Connecting Power Cord and Grounding Wire .................3-23
3.5.1 Connecting AC Power Cord ..................................3-23
3.5.2 Connecting DC Power Cord..................................3-25
3.5.3 Connecting Grounding Wire ..................................3-27
3.6 Connecting Console Cable ..............................................3-32
3.6.1 Console Cable.......................................................3-32
3.6.2 Connecting Console Cable....................................3-33
3.7 Installing and Removing Optional Interface Modules ......3-35
3.7.1 XFP Interface Module............................................3-35
3.7.2 Stack Module.........................................................3-38
3.7.3 XENPAK Optical Module.......................................3-39
3.8 Installing and Removing Dedicated Stack Cables ...........3-42
3.8.1 Introduction............................................................3-42
3.8.2 Installation .............................................................3-43
3.8.3 Removal ................................................................3-43
3.9 Verifying the Installation...................................................3-44
Chapter 4 Lightning Protection of the Switch............................4-1
4.1 Installation of Lightning Arrester for AC Power (Socket Strip
with Lightning Protection).........................................................4-1
Quick Start
H3C S5100-SI/EI Series Ethernet Switches Chapter 1 Product Overview
1-1
Chapter 1 Product Overview
1.1 Preface
H3C S5100 Series Ethernet Switches (hereinafter referred to as
the H3C S5100 series) are Gigabit Ethernet switching products
developed by H3C Technology Co., Ltd. The H3C S5100 series
provide a variety of service features. The H3C S5100 series are
designed as convergence and access devices for intranets and
metropolitan area networks (MANs), and can also be used for
connecting data center server clusters.
The H3C S5100 series come in two series: S5100-SI and
S5100-EI, which are available in the models listed in Table 1-1:
An SFP port and its corresponding 10/100/1000Base-T
autosensing Ethernet port form a Combo port. That is, only one of the
two ports forming the Combo port can be used at a time. Table 1-2
shows the mapping relations between the ports forming the Combo
port.
Quick Start
H3C S5100-SI/EI Series Ethernet Switches Chapter 1 Product Overview
1-2
Table 1-1 H3C S5100-SI/EI series
Series Model
10/100/1
000Base
-T
autosen
sing
Ethernet
port
1000Base-
X SFP port Console
port
S5100-8P-SI 8 2
S5100-16P-SI 16
S5100-24P-SI 24
S5100-S
I
S5100-48P-SI 48
4
S5100-8P-EI 8 2
S5100-16P-EI 16
S5100-24P-EI 24
S5100-48P-EI 48
S5100-26C-EI 24
S5100-50C-EI 48
4
S5100-8P-PWR
-EI 8 2
S5100-16P-PW
R-EI 16
S5100-26C-PW
R-EI 24
S5100-E
I
S5100-50C-PW
R-EI 48
4
1
Quick Start
H3C S5100-SI/EI Series Ethernet Switches Chapter 1 Product Overview
1-3
Table 1-2 Mapping relations between the ports forming the
Combo port
Model 1000Base-X
SFP port
10/100/1000Base-T
autosensing
Ethernet port
17 14
18 16
19 13
S5100-16P-SI
S5100-16P-EI
S5100-16P-PWR-EI
20 15
25 22
26 24
27 21
S5100-24P-SI
S5100-24P-EI
S5100-26C-EI
S5100-26C-PWR-EI 28 23
49 46
50 48
51 45
S5100-48P-SI
S5100-48P-EI
S5100-50C-EI
S5100-50C-PWR-EI 52 47
Andere Handbücher für H3C S5100-SI
3
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere H3C Netzwerk-Router Handbücher
H3C
H3C SR6604-X Bedienungs- und Wartungshandbuch
H3C
H3C S5560-HI Series Bedienungsanleitung
H3C
H3C S5120-EI Series Bedienungsanleitung
H3C
H3C CR16000-FA Series Bedienungsanleitung
H3C
H3C SR8800 IM-FW-II Bedienungsanleitung
H3C
H3C SR8800-X Bedienungsanleitung
H3C
H3C S5510 Series Bedienungsanleitung
H3C
H3C H3C S5600 Series Bedienungsanleitung
H3C
H3C S3100-52P Montageanleitung
H3C
H3C SR6608 Bedienungs- und Wartungshandbuch
H3C
H3C MSR810 Bedienungsanleitung
H3C
H3C SR6616 Bedienungsanleitung
H3C
H3C WT2024-U-PWR Bedienungsanleitung
H3C
H3C MSR Series Installationshandbuch
H3C
H3C S7502 Bedienungsanleitung
H3C
H3C S3600V2 SERIES Bedienungsanleitung
H3C
H3C S5150-EI Series Bedienungsanleitung
H3C
H3C S9500 Series Bedienungsanleitung
H3C
H3C MSR3600-28 Bedienungsanleitung
H3C
H3C S3100 Series Montageanleitung
Beliebte Netzwerk-Router Handbücher anderer Marken
NETGEAR
NETGEAR FS526T - Switch Bedienungsanleitung
Korenix
Korenix JetNet 5710G Series Bedienungsanleitung
Automated Logic
Automated Logic ZN551 Betriebsanleitung
Cisco
Cisco ASR 1000 Series Bedienerhandbuch
EnGenius
EnGenius ESR-9710 Bedienungsanleitung
Cisco
Cisco 805 Series Bedienungs- und Sicherheitshinweise