H3C S5120-SI Series Installationshandbuch

H3C S5120-SI Series Ethernet Switches

Command Reference

Hangzhou H3C Technologies Co., Ltd.

http://www.h3c.com

Manual Version: 6W105-20110810

Product Version: Release 1101

No part of this manual may be reproduced or transmitted in any form or by any means without prior

written consent of Hangzhou H3C Technologies Co., Ltd.

Trademarks

H3C, , Aolynk, , H3Care,

, TOP G, , IRF, NetPilot, Neocean, NeoVTL,

SecPro, SecPoint, SecEngine, SecPath, Comware, Secware, Storware, NQA, VVG, V2G, VnG, PSPT,

XGbus, N-Bus, TiGem, InnoVision and HUASAN are trademarks of Hangzhou H3C Technologies Co.,

Ltd.

All other trademarks that may be mentioned in this manual are the property of their respective owners.

Notice

The information in this document is subject to change without notice. Every effort has been made in the

preparation of this document to ensure accuracy of the contents, but all statements, information, and

recommendations in this document do not constitute the warranty of any kind, express or implied.

2-1

Preface

The H3C S5120-SI Series Ethernet Switches Command Reference, Release 1101 describes the

commands available in the H3C S5120-SI series software release 1101.

This preface includes:

1) About This Document

zAudience

zOrganization

zConventions

2) Documentation Guide

zRelated Documentation

zObtaining Documentation

zTechnical Support

zDocumentation Feedback

2-1

1 About This Document

Audience

This documentation is intended for:

zNetwork planners

zField technical support and servicing engineers

zNetwork administrators working with the S5120-SI series

Organization

The H3C S5120-SI Series Ethernet Switches Command Reference, Release 1101 comprises these

chapters:

Chapter Content

01-CLI CLI Configuration Commands

02-Login zCommands for Logging into an Ethernet Switch

zCommands for Controlling Login Users

03-Ethernet Port Ethernet Port Configuration Commands

04-Loopback Interface

and Null Interface Loopback Interface and Null Interface Configuration Commands

05-Ethernet Link

Aggregation Ethernet Link Aggregation Configuration Commands

06-Port Isolation Port Isolation Configuration Commands

07-Port Mirroring Port Mirroring Configuration Commands

08-LLDP LLDP Configuration Commands

09-VLAN

zVLAN Configuration Commands

zPort-Based VLAN Configuration Commands

zVoice VLAN Configuration Commands

10-MSTP MSTP Configuration Commands

11-IP Addressing IP Addressing Configuration Commands

12-IP Performance

Optimization IP Performance Optimization Configuration Commands

13-ARP zARP Configuration Commands

zARP Active Acknowledgement Configuration Commands

14-DHCP

zDHCP Relay Agent Configuration Commands

zDHCP Client Configuration Commands

zDHCP Snooping Configuration Commands

zBOOTP Client Configuration Commands

2-2

Chapter Content

15-FTP and TFTP

zFTP Server Configuration Commands

zFTP Client Configuration Commands

zTFTP Client Configuration Commands

16-IP Routing Basics

Configuration Routing-table Display and Reset Commands

17-Static Routing Static Routing Configuration Commands

18-Mulitcast zIGMP Snooping Configuration Commands

zMulticast VLAN Configuration Commands

19-QoS

zClass Configuration Commands

zTraffic Behavior Configuration Commands

zQoS Policy Configuration and Application Commands

zPriority Mapping Configuration Commands

zLine Rate Configuration Commands

zCongestion Management Configuration Commands

20-802.1X 802.1X Configuration Commands

21-AAA zAAA Configuration Commands

zRADIUS Configuration Commands

22-PKI PKI Configuration Commands

23-SSL SSL Configuration Commands

24-SSH2.0 SSH2.0 Configuration Commands

25-Public Key Public Key Configuration Commands

26-HABP HABP Configuration Commands

27-ACL ACL Configuration Commands

28-Device Management Device Management Commands

29-NTP NTP Configuration Commands

30-SNMP SNMP Configuration Commands

31-RMON RMON Configuration Commands

32-File System

Management

zFile System Management Commands

zConfiguration File Management Commands

33-System Maintaining

and Debugging

zSystem Maintaining Commands

zSystem Debugging Commands

34-Basic System

Configuration Basic Configuration Commands

35-Information Center Information Center Configuration Commands

36-MAC Address Table MAC Address Table Configuration Commands

37-Cluster Management

zNDP Configuration Commands

zNTDP Configuration Commands

zCluster Configuration Commands

38-HTTP zHTTP Configuration Commands

zHTTPS Configuration Commands

39-Stack Management zStack Management Configuration Commands

40-PoE PoE Configuration Commands

2-3

Chapter Content

41-IP Source Guard IP Source Guard Configuration Commands

42-Appendix Command Index

Conventions

This section describes the conventions used in this documentation set.

Command conventions

Convention Description

Boldface Bold text represents commands and keywords that you enter literally as shown.

italic Italic text represents arguments that you replace with actual values.

[ ] Square brackets enclose syntax choices (keywords or arguments) that are

optional.

{ x | y | ... }

Braces enclose a set of required syntax choices separated by vertical bars,

from which you select one.

[ x | y | ... ]

Square brackets enclose a set of optional syntax choices separated by vertical

bars, from which you select one or none.

{ x | y | ... } *

Asterisk marked braces enclose a set of required syntax choices separated by

vertical bars, from which you select at least one.

[ x | y | ... ] *

Asterisk marked square brackets enclose optional syntax choices separated by

vertical bars, from which you may select multiple choices or none.

&<1-n> The argument or keyword and argument combination before the ampersand (&)

sign can be entered 1 to n times.

# A line that starts with a pound (#) sign is comments.

GUI conventions

Convention Description

Boldface Window names, button names, field names, and menu items are in Boldface.

For example, the New User window appears; click OK.

> Multi-level menus are separated by angle brackets. For example, File > Create

> Folder.

Symbols

Convention Description

Means reader be extremely careful. Improper operation may cause bodily

injury.

Means reader be careful. Improper operation may cause data loss or damage to

equipment.

Means an action or information that needs special attention to ensure

successful configuration or good performance.

Means a complementary description.

2-4

Convention Description

Means techniques helpful for you to make configuration with ease.

2-1

2 Documentation Guide

Related Documentation

The H3C S5120-SI documentation set also includes:

Category Documents Purposes

Product

description and

specifications Marketing brochures Describe product specifications and benefits.

Compliance and safety

manual Provides regulatory information and the safety instructions that

must be followed during installation.

Installation guide

zProvides a complete guide to hardware installation and

hardware specifications.

zProvides a complete guide to software and hardware

troubleshooting.

Hardware

specifications

and installation

H3C Pluggable SFP

[SFP+][XFP]

Transceiver Modules

Installation Guide

Guides you through installing SFP/SFP+/XFP transceiver

modules.

Power

configuration RPS ordering guide Provides the RPS and switch compatibility matrix and RPS cable

specifications.

Configuration guide Describes software features and configuration procedures.

Software

configuration Command reference Provides a quick reference to all available commands.

recovery manual Tells how to find the lost password or recover the password

when the login password is lost.

Operations and

maintenance Release notes

Provide information about the product release, including the

version history, hardware and software compatibility matrix,

version upgrade information, technical support information, and

software upgrading.

Obtaining Documentation

You can access the most up-to-date H3C product documentation on the World Wide Web at this URL:

http://www.h3c.com.

Click the links on the top navigation bar to obtain different categories of product documentation:

z[Technical Support & Documents > Technical Documents] – Provides hardware installation,

software upgrading, and software feature configuration and maintenance documentation.

z[Products & Solutions] – Provides information about products and technologies, as well as

solutions.

2-2

z[Technical Support & Documents > Software Download] – Provides the documentation released

with the software version.

Technical Support

customer_service@h3c.com

http://www.h3c.com

Documentation Feedback

You can e-mail your comments about product documentation to [email protected].

We appreciate your comments.

Table of Contents

1 CLI Commands ··········································································································································1-1

CLI Commands·······································································································································1-1

display history-command·················································································································1-1

quit···················································································································································1-1

return ···············································································································································1-2

screen-length disable ······················································································································1-3

system-view·····································································································································1-3

Andere Handbücher für S5120-SI Series

Inhaltsverzeichnis

Andere H3C Netzwerk-Router Handbücher

H3C

H3C S5830V2 series Bedienungsanleitung

H3C

H3C MSR 930 Bedienungs- und Wartungshandbuch

H3C

H3C SR8800 Series Bedienungsanleitung

H3C

H3C S5500-EI series Bedienungsanleitung

H3C

H3C S3600V2 SERIES Bedienungsanleitung

H3C

H3C SR6600 SPE-FWM Bedienungsanleitung

H3C

H3C RA5100 Bedienungsanleitung

H3C

H3C S3100-52P Bedienungsanleitung

H3C

H3C S3100-52P Bedienungsanleitung

H3C

H3C MSR 20 Series Bedienungsanleitung

H3C

H3C S9500 Series Bedienungsanleitung

H3C

H3C H3C S3600 Series Montageanleitung

H3C

H3C S5510 Series Bedienungsanleitung

H3C

H3C MSR-20-21 ROUTER Bedienungsanleitung

H3C

H3C S5510 Series Bedienungsanleitung

H3C

H3C S5560-EI series Bedienungsanleitung

H3C

H3C H3C MSR 20 Bedienungsanleitung

H3C

H3C S12500R Series Kurzanleitung

H3C

H3C MSR 5600 Bedienungsanleitung

H3C

H3C MSR 2600 Series Bedienungsanleitung

H3C

H3C SecPath L5000-S Bedienungs- und Wartungshandbuch

H3C

H3C CR16000-F Bedienungsanleitung

H3C

H3C MSR 900 Series Bedienungsanleitung

H3C

H3C SR8800 10G Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise