Hach FilterTrak 660 Bedienungsanleitung

52364-89

FilterTrak™ 660 Calibration Kit

General Information

The Calibration Kit, shown in Figure 1, is shipped with the calibration body (stand mounted),

a 1-liter bottle of 800 mNTU StablCal®Standard, and a funnel to reduce bubbles when

pouring the standard. The 800 mNTU StablCal Standard is assayed and the value is

reported on the label to the nearest 1 mNTU. The tolerance of the standard is ±50 mNTU.

Figure 1 Calibration Kit Components

Calibration Procedure

1. Remove the cover.

2. Rinse the calibration body with deionized water.

3. Drain all deionized water from the body and replace the drain plug.

4. Clean the FilterTrak 660 Nephelometer head assembly as described in the FilterTrak

660 Laser Nephelometer Instrument Manual (Cat. No. 52300-18).

5. Gently invert the StablCal Standard bottle 50 times to mix. Each inversion should last

1-3 seconds. Do not shake the standard.

6. Place the funnel into the end of the bubble trap, opposite the water intake. See Figure 2.

7. Slowly pour the standard into the funnel.

8. Install the FilterTrak 660 head assembly on the calibration body. See Figure 3.Allowthe

standard to sit undisturbed in the body for approximately 10–20 minutes before

proceeding with the calibration.

9. Calibrate using the instructions in the FilterTrak 660 Laser Nephelometer

Instrument Manual.

Calibration Body

Funnel

800 mNTU StablCal

1-liter Bottle

FilterTrak™ 660 Calibration Kit

HACH COMPANY

WORLD HEADQUARTERS

Telephone: (970) 669-3050

FAX: (970) 669-2932

FORTECHNICAL ASSISTANCE, PRICE INFORMATION AND ORDERING:

Call 800-227-4224

Contact the HACH office or distributor serving you.

www.hach.com [email protected]

In the U.S.A.–

Outside the U.S.A.–

On the Worldwide Web –; E-mail –

toll-free

10. When the calibration is complete, drain the calibration body. The standard cannot be

stored for future use.

11. Remove the head assembly and carefully rinse the head assembly and calibration body.

Immediately reinstall the head assembly back on the FilterTrak 660 body.

12. Store the calibration body with the cover securely in place.

Figure 2 Pouring the StablCal Standard

Figure 3 Calibration Body with FilterTrak 660 Head Assembly in Place

Place the funnel into the body.

Slowly pour the StableCal

Standard into the funnel

Drain

CONFIGURE

STATUS

POWER

REMOTE

Laser Turbidimeter

FilterTrak 660

™

FilterTrak 660

™

Inhaltsverzeichnis

Andere Hach Messgerät Handbücher

Hach

Hach POCKET COLORIMETER II Bedienungsanleitung

Hach

Hach DR300 Bedienungsanleitung

Hach

Hach PHOSPHAX sigma High Range Kurzanleitung

Hach

Hach 910 Bedienungsanleitung

Hach

Hach 5410001 Bedienungsanleitung

Hach

Hach 2200 PCX Bedienungsanleitung

Hach

Hach TitraLab Bedienungsanleitung

Hach

Hach HIAC 9705 Bedienungsanleitung

Hach

Hach HQ440d Kurzanleitung

Hach

Hach QbD1200+ Bedienungsanleitung

Hach

Hach PLATINUM Series Bedienungsanleitung

Hach

Hach REFO 60D Bedienungsanleitung

Hach

Hach DR/2010 Bedienungsanleitung

Hach

Hach 5500sc SiO2 Bedienungsanleitung

Hach

Hach sensION+ pH3 Bedienungsanleitung

Hach

Hach DR/700 Referenzhandbuch

Hach

Hach Sension4 Referenzhandbuch

Hach

Hach DR 5000 Bedienungsanleitung

Hach

Hach ORBISPHERE 3650 Atex Kurzanleitung

Hach

Hach sensION+ pH1 Bedienungsanleitung

Hach

Hach CDC401 Series Bedienungsanleitung

Hach

Hach POLYMETRON 8810 Kurzanleitung

Hach

Hach sc100 1720E Bedienungsanleitung

Hach

Hach Lange APA 6000 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung