Haier S110EHF Bedienungsanleitung

Solar Water Heater User's Manual

Please read this manual before usage

Retain it for future reference

S75EHF

S85EHF

S110EHF

S125EHF

S150EHF

S75EHL

S85EHL

S110EHL

S125EHL

S150EHL

Ä¿Â¼

²úÆ·ÌØµã 1

ÓÃÇ°ÐëÖª

°²×°ËµÃ÷

ÊÛºó·þÎñ

Parameters

Selection of installation location

Outline and installation dimensions

of the water heater

Assembling the bracket

Installing the water tank

Installing the electric heater

Securing the bracket

Installing the vacuum tubes

Schematic drawing of

the indoor pipeline and wiring

The operation method

FAQ

Precautions in pipeline installation 9

°²È«×¢ÒâÊÂÏî

Special tips

Ê¹ÓÃËµÃ÷

¼¼ÊõÊý¾Ý

Packing list

Connection method of water supply

pipeline in the houses where a solar

water heat coexists with another

type of water heater 10

Contents

Features

Technical data

Safety precautions

Before use

Installation instructions

Operation instructions

Electric parameter

Electricity schematic diagram

Pipelines thermal insulationnotice

²úÆ·ÌØµã ¼¼ÊõÊý¾Ý

²úÆ·ÌØµã

1.SUS304 stainless steel water tank liner

The tank liner is made of SUS304 stainless steel. It is a food grade material featuring

high anti-corrosion ability and durability.

2.Effective and energy-saving heat insulation layer

Polyurethane foam material for solar water heater is adopted to ensure high heat

insulation ability and reduce heat loss to the maximum extent.

3.Al-Zn alloy coated tank shell

Al-Zn alloy coated steel plate has very strong anti-corrosion ability and excellent

weatherability. It is the most preferred outdoor protective material.

4.Tower type bracket

The bracket is made of carbon steel panel by shaping and plastic spraying. It has the

advantages of stable structure, beautiful appearance, anti-corrosion and so on.

¼¼Êõ²ÎÊý

Note: Allowableerror for aperturearea: 3%, for volume: 5%, for othersizes: 10%

Features Technical Data

Features

Parameters

Model

Size of

the

vacuum

tubes

Bracket

form

Quantity

of the

vacuum

tubes

Total

water

volume

(L)

Aperture

area

(m )

Volume

useable

water(L)

S150EHF 58X1800(mm) 19 2.53 204150 Flat roof, 45

S125EHF 58X1800(mm) 16 2.13 170125 Flat roof, 45

S110EHF 58X1800(mm) 14 1.86 150110 Flat roof, 45

S85EHF 47X1500(mm) 16 1.52 10885 Flat roof, 45

S75EHF 47X1500(mm) 14 1.33 96

75 Flat roof, 45

S75EHL 47X1500(mm) 14 1.33 96

75 Fastigium, 45

S85EHL 47X1500(mm) 16 1.52 10885 Fastigium, 45

S150EHL 58X1800(mm) 19 2.53 204150 Fastigium, 45

S110EHL 58X1800(mm) 14 1.86 150110 Fastigium, 45

S125EHL 58X1800(mm) 16 2.13 170125 Fastigium, 45

²úÆ·ÌØµã ¼¼ÊõÊý¾Ý

²úÆ·ÌØµã

¼¼Êõ²ÎÊý

Features Technical Data

Electric parameter

Electricity schematic diagram

warning:

1.Do not operate in charge when installment or maintenance;

2.Forbids below 10 years old child use alone ;

3.Before using the hot water, to stop the electric heating ;

If the supply cord isdamaged, it mustbe replaced bya special cord

or assembly availablefromthe manufacturer orits service agent.

L live wrie(brown line)

N: neutral wrie (blue line)

RP: Leakage protector

TM: thermostat

ST: self-resetting thermal cut-out

EH: electric heater

E: earthing( )yellow green line

1.Power supply:220V 50Hz

2.Power:1500W

3.Leakage current:10mA/0.1S

4.Waterproof level:IPX4

°²È«×¢ÒâÊÂÏî

2. Avoiding irradiation without water after installation, it can't be used immediately, it

should be sheltered.

3. When supplying water at the first time, it should be operated in the morning or

evening or the condition of short of light; avoid supplying water in strong sunshine,

in order to prevent vacuum tubes bombing.

4. If the water pressure isn't enough for water supply, please install an pressurize

equipment.

5. When the hot water is to be used, don't place the spray head face yourself until the

water temperature is suitable.

6. This product can supply the water depend on the fall of the tank and the water exit ,

an pressurize equipment is recommended while the water couldn't be supplied

normally due to the low fall.

7. Do not supply cold water more than once in a low solar irradiance day.

8. The energy is from solar, in the days that lack of solar such as rainy or snowy day,

the temperature of the water may can't reach your demand,

9. Make sure the evacuated tubes clean, hose off the dust and dirt on the tubes and

the reflector before the winter comes.

10. Do not startup the electric heater in the states of no water in the tank.

11.The evacuated tubes resist as low temperature as -70 when tubes is emptied.

The tank should remain filled up during continuously cloudy or snowing days in winter,

in addition every two days the cold water in the tank should be changed to prevent the

water in the tank from freezing which might damage the tubes.

When using the water heater with electric heating, ensure that electric heating and

electric tracing belt are closed.

If there isn't electric heating ,

it may not be used normally.

°²È«×¢ÒâÊÂÏî

Safety precautions

Prior to installing and using the water heater, please read the following contents

carefully. Please retain this manual properly for future reference.

1.Upon unpacking, please check against the packing list in this manual.

2.Improper use of the water heater may cause serious burns. Be sure to take a

shower or wash after mixing the hot water with cold water.

3.To ensure normal use, never refit it or block the ventilation pipe and overflow pipe.

Otherwise the water tank will shrink due to negative pressure

Note: Installation of the water heater must be conducted by professional

personnel.

Before use Installation instructions

Special tips

Selection of installation location

1.In areas where lightning strikes frequently occur, the water heater shallbe installed

within the lightning proof range of the building.

2.The orientation range of the water heater: 10 degrees south by east to 15 degrees

south by west.

3.There should be no shading objects in the front of the installation location of the

water heater. If there is a shading object, the distance between it and the water

heater should be longer than L. L=H/tg(66.5 -a) (where H: height of the shading

object; a: local latitude)

°²×°ËµÃ÷

ÈÈË®Æ÷ÍâÐÎ¼°°²×°³ß´ç

Model

Note: error of above dimensions: 10%

Outline dimeVnsions

(mm)

Installation dimensions

(mm)

1166

1306

1296

1456

1696

1166

1306

1296

1456

1696

1000

1140

1300

1540

1000

1140

1300

1540

1457

1710

1457

1710

1351

1590

1418

1645

Installation instructions

Outline and installation dimensions of the water heater

S75EHF

S85EHF

S110EHF

S125EHF

S150EHF

S75EHL

S85EHL

S110EHL

S125EHL

S150EHL

See the attached paper in the bracket packing case for assembly drawing and packing

list of the bracket.

Installation instructions

Assembling the bracket

Securing the bracket

1.Recommend you to secure the legs of the water heater on a foundation with

embedded irons. You can also make cement bricks, attach expansion bolts in the

cements and fix the heater legs on the expansion bolts.

2.Adjust the height of the bracket using the hard, waterproof spacers to ensure

levelness of the water tank as well as even the load of each leg.

Notes:

1.Ensure close contact of all legs of the water heater with the support plane. No legs

are allowed to hang in the air as this may cause deformation of the bracket and thus

damage the water heater.

2.In the areas where typhoon happens frequently, fix the water tank and bracket firmly

on the roof with wire rope.

3.The water heater must be installed stably and firmly. Otherwise serious damage or

injury may occur in bad weather.

Installing the water tank

1.Take the water tank from the packing case and remove the nuts and shims attached

to the bolts on both sides of the tank.

2.Insert the bolts on the bottom of the tank into the long holes in the tank support of

the bracket and attach the shims and nuts.

Notes:

1.To reduce scratching, remove the protective plastic film from the water tank after the

installation is finished. Never use sharp tools such as wallpaper knives to remove

the film.

2.The assembly of the water tank is realized by bolt connection and nut fixing. Tighten

all nuts after the assembly of whole water heater is finished.

3.When installing the water tank, please keep the center lines of the connection holes

of the vacuum tubes parallel with the oblique-pulling posts of the bracket.

Wind shroud

Corking up

position

Tail-holder

Tailstock

Tail-holder

Vacuum

Tailstock

Installation instructions

Installing the vacuum tubes

1.Before installing, the vacuum tubes should be protected from sunshine. Otherwise

you may be burned during installation.

2.Put the wind shroud on a vacuum tube (A).

3.Insert the vacuum tube with even force while rotating to turn it into the seal rings. The

direction of the resultant force should be consistent with the axis of the vacuum tube.

4.Put the tail-holder into the tailstock ( B) and then fasten the vacuum tube on the

tail-holder (C).

5.The insertion depth of the vacuum tube into the seal ring should be about 1cm. Push

the wind shroud onto the water tank to plug the joint (D).

6.When installing the vacuum tubes, one tube should be installed on each side of the

water tank first so that the water tank and bracket can be positioned as a whole.

Notes

1.Check if the seal rings in the tank holes are all ready, if the sealing planes are clean,

free of foreign bodies and breakage.

2.Put the wind shroud on the open end of the vacuum tube with the inclined plane

downward and to a position about 10cm to the tube end. Before installing, wet the

tube end with water to facilitate installation.

Wind

Vacuum

Seal ring

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Haier Boiler Handbücher

Haier

Haier ES25V-P1 Bedienungsanleitung

Haier

Haier EI39G1M(W) Bedienungsanleitung

Haier

Haier Sea-ox King FCD-JTLD80 Bedienungsanleitung

Haier

Haier ES50V-R1 Handbuch

Haier

Haier FCD-JTHA40-III, FCD-JTHA50-III,... Bedienungsanleitung

Haier

Haier Little Sea-ox FCD-JTHC80A-III (E) Bedienungsanleitung

Haier

Haier Little Sea-ox FCD-JTSA50-III Bedienungsanleitung

Haier

Haier ES100V-U1 Handbuch

Haier

Haier HP80M5 Technisches Datenblatt

Haier

Haier ES15V-P1 Bedienungsanleitung

Haier

Haier FCD-JTHMG80-III Montageanleitung

Haier

Haier HP200S1 Technisches Datenblatt

Haier

Haier ES10V-E1 Bedienungsanleitung

Haier

Haier QBJ1-130A58E Bedienungsanleitung

Haier

Haier ES50V-F1(EU) Bedienungsanleitung

Haier

Haier FCD-JTH40-III Bedienungsanleitung

Haier

Haier GV270REMB Bedienungsanleitung

Haier

Haier ES10V-M1 Bedienungsanleitung

Haier

Haier FCD-JTLD100 Bedienungsanleitung

Haier

Haier FCD-JTHC80A-III (E), FCD-JTHC100A-III (E) Bedienungsanleitung

Haier

Haier ES100V-R1(H) Bedienungsanleitung

Haier

Haier ES50H-T1 (E) Bedienungsanleitung

Haier

Haier ES6VQ1 (R) Bedienungsanleitung

Haier

Haier ES50H-CK1(MEA) Bedienungsanleitung

Beliebte Boiler Handbücher anderer Marken

Kenmore

Kenmore 153.582400 Bedienungsanleitung

Applimo

Applimo Edel AIR Bedienungsanleitung

STIEBEL ELTRON

STIEBEL ELTRON Eltronom SHU 5 S Bedienungsanleitung

clage

clage E-Mini Series Bedienungsanleitung

Toyotomi

Toyotomi Oil Miser OM-180 Bedienungsanleitung

Bradford White

Bradford White EF Series Bedienungsanleitung

Eccotemp

Eccotemp 40-H Bedienungsanleitung

Dimplex

Dimplex ECSd125-580 Leitfaden

Dux

Dux 32FCR6N Bedienungsanleitung

Toyotomi

Toyotomi Oil Miser OM-148 (Type D) Fehlerbehebungshandbuch

Noritz

Noritz N-132M Gebrauchsanweisung

TESY

TESY GCV7/4S 10047 Technisches Datenblatt

A.O. Smith

A.O. Smith Gphe 50 Bedienungsanleitung

Koryo

Koryo KWHZF15Y Bedienungsanleitung

Pentair

Pentair PSC-14-4-02 Bedienungsanleitung

GE 40M06AAG Montageanleitung

Thermor

Thermor AEROMAX SPLIT 2 Bedienungsanleitung

American Hometec

American Hometec AHQ-B03X Bedienungsanleitung