HAKO Scrubmaster B 120 R Installations- und Betriebshandbuch

Sheet 1

Scrubmaster B 120 R

(7177.XX)

Service Booklet

Service-Handbuch

Hako GmbH .Technisches Produktmanagement . 23840 Bad Oldesloe, Germany Updated 05/2018 - Rev.1.03

Confidential – for internal use only

Schulung/Training

Fehlersuche/Troubleshooting

Einstelldaten/Adjustments

Sheet 2

Table of contents

1 Information 6

2 General information 7

2.1 Settings 10

2.1.1 Connecting to the diagnostics PC 12

2.1.2 Flashing the control unit 14

2.1.3 Connection diagram 16

2.2 Brief description 17

2.2.1 Switching off vacuuming / dirt water tank full 18

2.2.2 Indication Solution Tank empty 21

2.2.3 Machine home position 22

2.2.4 Seat contact switch (3.6.6.4.) 23

2.2.5 Accessing programming 25

2.2.6 Resetting the last service message in the switch-on menu 29

3 Technical data 30

Sheet 3

Table of contents

4 Maintenance intervals 35

4.1 Hako system maintenance (customer) 36

4.2 Hako system maintenance I 37

4.3 Hako system maintenance II 39

4.4 Hako system maintenance S 40

5 Cleaning programmes (FPV) 41

6 Machine settings 44

6.1 Basic settings 44

6.1.1 Cleaning units 45

6.1.2 Battery and charger settings 47

6.1.3 Battery setting (LDS) 48

6.1.4 Charger 50

6.1.5 Charger characteristic curves 52

6.1.6.Charging characteristics table of the integrated charger 53

6.2 Customer-specific settings (PPV) 54

Sheet 4

Table of contents

7 Mechanical components 58

7.1 Squeegee 58

7.2 Rotating brush heads 63

7.3 Roller brush heads 63

7.4 Lifting element brush head 64

7.4.1 Potentiometer in the lifting element for the brush head 65

8 Water pump 66

8.1 Water quantities 67

8.2 Water pump standstill detection 68

9 Drive 69

9.1 DMC drive control (AC motor) 70

9.1.1 Connection description 71

9.2 Service codes DMC control unit 72

9.3 Brake – manual release of the brake 77

9.4 Brake – testing the brake function 78

Sheet 5

Table of contents

10 Service messages 79

10.1 Service alarm clock 3.3.1.1 84

11 Battery charger 85

11.1 Operating manual 85

11.2 Programming the charger 89

11.3 Charge data table 90

12 Options 91

13 Real-time clock (RTC) 94

14 Notes 97

Sheet 6

Caution:

• During all work at the machine, secure it against unintentional movement.

• Only carry out work at the machine when it has been de-energised (disconnect the

battery plug), except for current and voltage measurements.

• After repairing electrical drives, measure the starting and operating currents to

detect possibly still present errors.

• During all work at the machine, always observe the general safety and accident

prevention regulations of the legislation.

1. Information

Sheet 7

The Scrubmaster B120 R is equipped with a service indicator in the display of the

operating hours meter. When switching on the key switch, four digits are shown on the

display for approx. 3 seconds that state the software version (e.g. 1.004), and possibly

further four digits that show the last displayed service message, followed by the hour

indicator.

If a fault occurs, the wrench in the display lights up and the machine beeps. The

current service code (four-digit alphanumerical code in the service indicator) is shown

with flashing dots between the characters.

It is only a current service message if these criteria apply!

2. General information

Sheet 8

Scrubmaster B120 R

The Scrubmaster B120 R is available in working widths of between 70 cm and 90 cm.

The machines are always supplied ex factory with batteries; here, it is possible to

choose between various battery sizes (from 180 Ah to 320 Ah) as well as between

different battery technologies (EPzS/EPzB, PzV or GiV).

Furthermore, it is differentiated between edition machines and configuration machines.

Edition machines are machines that have a clearly defined scope of equipment. In this

context, only a limited scope of additional equipment features is available. Additional

options are not installed in the factory but supplied loosely with the delivery for on-site

installation at the customer’s premises.

A separate operating manual, which describes the operating and service statuses of

the charger, is available for the chargers and supplied together with the device. The

charge indicator is shown on the machine display. Service messages of the charger

are also shown on the machine display.

2. General information

Sheet 9

Configuration machines are manufactured order-specifically according to customer

wishes from a pool of available equipment features. Additional options (chemical

dosing, working light, warning signal, etc.) are installed in the factory.

For more details, see the relevant current price lists.

2. General information

Sheet 10

Respective settings can be carried out via the machine’s configuration menu.

Currently, these settings are carried out via the machine display. The diagnostics plug

(order no. PN 03006790) is required for these settings. Setting via the diagnostics

system is planned but currently not yet available.

Settable parameters include:

• Cleaning unit

• LDS (Low Discharge Signal sender) / Battery type

• Charger

• Options

• Deleting the display of the last error after repair work

• Programmable programme variants (PPV)

• Fixed programme variants (FPV), cleaning programmes

2.1 Settings

Andere Handbücher für Scrubmaster B 120 R

Inhaltsverzeichnis

Andere HAKO Schrubber Handbücher

HAKO

HAKO Scrubmaster B400 R Installations- und Betriebshandbuch

HAKO

HAKO Scrubmaster B100R Bedienungsanleitung

HAKO

HAKO Hakomatic B45 Bedienungsanleitung

HAKO

HAKO Scrubmaster B12 Bedienungsanleitung

HAKO

HAKO Scrubmaster B120 Bedienungsanleitung

HAKO

HAKO Minuteman RoboScrub 20 Bedienungsanleitung

HAKO

HAKO Scrubmaster E10 Bedienungsanleitung

HAKO

HAKO Scrubmaster B260 R Installations- und Betriebshandbuch

HAKO

HAKO PowerBoss Phoenix 26 Bedienungsanleitung

HAKO

HAKO Scrubmaster B175 R Bedienungsanleitung

HAKO

HAKO Scrubmaster B400 R Bedienungsanleitung

HAKO

HAKO Scrubmaster B260 R Bedienungsanleitung

HAKO

HAKO Scrubmaster B 120 R Bedienungsanleitung

HAKO

HAKO Hakomatic B 650 R Bedienungsanleitung

HAKO

HAKO Scrubmaster B30 CL Bedienungsanleitung

HAKO

HAKO Scrubmaster B25 Bedienungsanleitung

HAKO

HAKO Hakomatic B45 Bedienungsanleitung

HAKO

HAKO Citymaster 2200 Bedienungsanleitung

HAKO

HAKO Scrubmaster B8 Bedienungsanleitung

HAKO

HAKO Scrubmaster B175 R Bedienungsanleitung

HAKO

HAKO Scrubmaster B 120 R Bedienungsanleitung

HAKO

HAKO PowerBoss Nautilus Bedienungsanleitung

HAKO

HAKO Scrubmaster B75R Bedienungsanleitung

HAKO

HAKO Hakomatic B45 CL DTC Bedienungsanleitung

Beliebte Schrubber Handbücher anderer Marken

Olympus

Olympus M200H Bedienungsanleitung

Clarke

Clarke BEXT 100H Installations- und Betriebsanleitung

JOHNY VAC

JOHNY VAC JVC70BCT Bedienungsanleitung

RCm

RCm Elan Series Handbuch

Kärcher

Kärcher B 120 W Bedienungsanleitung

Truvox

Truvox Orbis MotorScrubber 20 Bedienungsanleitung

Numatic

Numatic TTB 4045/100 Bedienungsanleitung

U.S. Products

U.S. Products PEX 500-C-TICK Betriebsanleitung

Mclennan

Mclennan C510 Bedienungsanleitung

Tennant

Tennant T20 LPG Bedienungsanleitung

Columbus

Columbus ARA 66 BM 100 Bedienungsanleitung

Numatic

Numatic TTV 678G / 300T Bedienungsanleitung

American-Lincoln

American-Lincoln 505-945 Bedienungsanleitung

Floorpul

Floorpul ruby 48 blt Benutzerhandbuch

Onyx

Onyx RX-34 Bedienungsanleitung

Dustbane

Dustbane Hurricane 400 Bedienungsanleitung

Sana

Sana EUJ-702 Bedienungsanleitung

REMS

REMS Twist Bedienungsanleitung