HAKO Scrubmaster B260 R Installations- und Betriebshandbuch

Slide 1

Scrubmaster B 260 R

(7182.XX)

Service Booklet

RevHako GmbH .Technisches Produktmanagement . D-23840 Bad Oldesloe .Updated 03/2022 - Rev. 1.04

Confidential – for internal use only

Training

Troubleshooting

Adjustments

Slide 2

Table of contents

1 Information 7

2 General information 8

2.1 Settings 11

2.1.1 Control panel 12

2.1.2 Machine control unit 13

2.2 Brief description 14

2.2.1 Switching off suction / waste water tank full 15

2.2.2 Fresh water tank display 16

2.2.3 Machine home position 18

2.2.4 Seat contact switch (3.6.6.4.) 19

2.3 Diagnostics and communications 21

2.3.1 Prerequisites 21

2.3.2 Diagnostic software on the diagnostic computer 22

2.3.3 Connecting to the diagnostic PC 23

2.3.4 Connection scheme with the diagnostic PC 25

2.3.5 Flashing the software 26

2.3.6 Flashing the SD-Card 27

Slide 3

Table of contents

2.4 Configuration menu 29

2.4.1 Accessing the configuration 29

2.4.2 Time and date setting menu 32

2.4.3 Configuration setting menu 33

2.4.4 Settings which can be made without a code 35

2.4.5 Settings which can be made with a code 36

2.4.6 Resetting the last error and deleting the error memory 37

2.4.7 Deleting the last error on the display panel 38

2.4.8 Deleting the error entries 39

2.5 Jacking point 40

3 Technical data 41

4 Maintenance intervals 42

5 Cleaning programmes (FPV) 43

5.1 Cleaning programmes (SOW) 46

Slide 4

Table of contents

6 Machine settings 48

6.1 Basic settings 48

6.1.1 Cleaning units 49

6.1.2 Battery settings 51

6.1.3 Battery setting (LDS) 52

6.1.4 Charger 54

6.1.7 All-wheel drive variant – X- AC 55

6.1.8 SD storage medium in control panel 56

6.1.9 Logo on the start screen 57

6.2 Customer-specific settings (PPV) 58

7 Mechanical components 61

7.1 Squeegee 61

7.2 Rotating brush heads 67

7.2.1 Rotating brush heads – increased pressure stages 68

7.3 Roller brush heads 70

7.4 Lifting element brush head 72

7.4.1 Position detection in the brush head lifting element 72

7.4.2 Replacing the brush head lifting element 73

Slide 5

Table of contents

8 Water pump 74

8.1 Water quantities 75

8.2 Water pump standstill detection 76

8.3 Scrubbing/suction tool and spray tool 77

8.4 Water supply 78

9 Drive 79

9.1 DMC drive control unit (front) 80

9.1.1 Connection description – front drive control 80

9.1.2 DMC control service codes – front drive control 82

9.1.3 Brake – manual release of brake – front 88

9.1.4 Brake – checking the brake function 89

9.2 DMC drive control (rear) 90

9.2.1 Connection description – rear drive control 90

9.2.2 DMC control service codes – rear drive control 92

9.2.3 Brake at rear-wheel drive 97

9.2.4 Steering angle sensor 98

Slide 6

Table of contents

10 Service messages 102

10.1 Meaning of display during switch-on 107

10.2 Service alarm clock 3.3.1.1 108

11 Battery charger 109

12 Options 110

13 Electrical components 115

13.1 Machine controller A01 and slave machine controller A06 115

13.2 Dash board A02 119

14 Notes 121

Slide 7

Caution:

• During all work at the machine, secure it against unintentional movement.

• Only carry out work at the machine when it has been de-energised (disconnect the

battery plug), except for current and voltage measurements.

• After repairing electrical drives, measure the starting and operating currents to

detect possibly still present errors.

• During all work at the machine, always observe the general safety and accident

prevention regulations of the legislation.

1. Information

Slide 8

The Scrubmaster B260R is equipped with a multifunction display (MFD) on which all

machine statuses are displayed and machine settings can be made.

If a fault occurs, the wrench in the display lights up and the machine beeps. The

current service code (four-digit alphanumerical code in the service indicator) is shown

with flashing dots between the characters.

In addition, a red wrench can be displayed above the icon of the affected unit.

The corresponding service code is then determined via the "Service information"

menu, if not shown in the operating hours display.

2. General information

Slide 9

Scrubmaster B260 R

The Scrubmaster B260 R is available in working widths with a 108 cm or 123 cm

rotating brush unit and a 108 cm roller brush unit.

The 123 cm rotating brush unit has 3 brush motors, and the 180 cm rotating brush unit

is available with 2 or 3 brush motors.

The batteries for the machine are a maintenance-free 36 V/420 Ah PzV tray and a

maintenance-free 36 V/480 Ah PzS tray.

Furthermore, it is differentiated between edition machines and configuration

machines. Edition machines are machines that have a clearly defined scope of

equipment. In this context, only a limited scope of additional equipment features is

available. Additional options are not installed in the factory but supplied loose with the

delivery for installation on site at the customer’s.

A separate operating manual, which describes the operating and service statuses of

the charger, is available for the chargers and supplied together with the device.

2. General information

Slide 10

Configuration machines are manufactured order-specifically according to customer

wishes from a pool of available equipment features. Additional options (chemical

dosing, working light, warning signal, etc.) are installed in the factory.

For more details, see the relevant current price lists.

Additional equipment features (e.g. chemical dosing system, rotating beacon,

bluespot, etc) to be retrofitted in the field can be ordered via the Editions price list.

2. General information

Andere Handbücher für Scrubmaster B260 R

Inhaltsverzeichnis

Andere HAKO Schrubber Handbücher

HAKO

HAKO Scrubmaster B5 Bedienungsanleitung

HAKO

HAKO 7580.32 Bedienungsanleitung

HAKO

HAKO Scrubmaster B45CL Bedienungsanleitung

HAKO

HAKO Scrubmaster B75R Bedienungsanleitung

HAKO

HAKO Scrubmaster B400 R Installations- und Betriebshandbuch

HAKO

HAKO Scrubmaster B 120 R Installations- und Betriebshandbuch

HAKO

HAKO Hakomatic B45 Bedienungsanleitung

HAKO

HAKO Scrubmaster B25 Bedienungsanleitung

HAKO

HAKO Hakomatic B 1050 Bedienungsanleitung

HAKO

HAKO Scrubmaster B115 R Bedienungsanleitung

HAKO

HAKO Scrubmaster B260 R Bedienungsanleitung

HAKO

HAKO Hakomatic B45 Bedienungsanleitung

HAKO

HAKO Scrubmaster B 115 R Installations- und Betriebshandbuch

HAKO

HAKO PowerBoss Phoenix 26 Bedienungsanleitung

HAKO

HAKO Hakomatic B45 CL DTC Bedienungsanleitung

HAKO

HAKO Hakomatic E 430 Bedienungsanleitung

HAKO

HAKO Scrubmaster B175 R Bedienungsanleitung

HAKO

HAKO Scrubmaster B 120 R Bedienungsanleitung

HAKO

HAKO Hakomatic B 650 R Bedienungsanleitung

HAKO

HAKO Scrubmaster B175 R Bedienungsanleitung

HAKO

HAKO Scrubmaster B175 R Bedienungsanleitung

HAKO

HAKO Scrubmaster B30 Bedienungsanleitung

HAKO

HAKO Scrubmaster B25 Bedienungsanleitung

HAKO

HAKO Scrubmaster B100R Bedienungsanleitung

Beliebte Schrubber Handbücher anderer Marken

Olympus

Olympus M200H Bedienungsanleitung

Clarke

Clarke BEXT 100H Installations- und Betriebsanleitung

JOHNY VAC

JOHNY VAC JVC70BCT Bedienungsanleitung

RCm

RCm Elan Series Handbuch

Kärcher

Kärcher B 120 W Bedienungsanleitung

Truvox

Truvox Orbis MotorScrubber 20 Bedienungsanleitung

Numatic

Numatic TTB 4045/100 Bedienungsanleitung

U.S. Products

U.S. Products PEX 500-C-TICK Betriebsanleitung

Mclennan

Mclennan C510 Bedienungsanleitung

Tennant

Tennant T20 LPG Bedienungsanleitung

Columbus

Columbus ARA 66 BM 100 Bedienungsanleitung

Numatic

Numatic TTV 678G / 300T Bedienungsanleitung

American-Lincoln

American-Lincoln 505-945 Bedienungsanleitung

Floorpul

Floorpul ruby 48 blt Benutzerhandbuch

Onyx

Onyx RX-34 Bedienungsanleitung

Dustbane

Dustbane Hurricane 400 Bedienungsanleitung

Sana

Sana EUJ-702 Bedienungsanleitung

REMS

REMS Twist Bedienungsanleitung