Harbor Breeze BDB52BNK5L Bedienungsanleitung

Harbor Breeze® is a registered trademark

ITEM #0883808

0883807

GRACE BAY CEILING FAN

Español p. 20

MODEL #BDB52BNK5L

BDB52OSB5L

ATTACH YOUR RECEIPT HERE

Serial Number Purchase Date

Questions, problems, missing parts? Before returning to your retailer, call our customer

service department at 1-800-643-0067, 8 a.m. - 6 p.m., EST, Monday - Thursday, 8 a.m. -

5 p.m., EST, Friday.

PH18432

Safety Information ...............................................................................................................2

Package Contents ...............................................................................................................4

Hardware Contents

..........................................................................................................................

Preparation ..........................................................................................................................5

Initial Installation ..................................................................................................................6

Downrod-Style Fan Mounting ..............................................................................................8

Closemount-Style Fan Mounting .......................................................................................10

Wiring ................................................................................................................................

Final Installation ................................................................................................................

Operating Instructions .......................................................................................................16

Care and Maintenance ......................................................................................................17

Troubleshooting..................................................................................................................18

Limited Lifetime Warranty ..................................................................................................19

Replacement Parts List .....................................................................................................19

TABLE OF CONTENTS

READ AND SAVE THESE INSTRUCTIONS

Please read and understand this entire manual before attempting to assemble, install or operate the

product.

• Do not discard fan carton or foam inserts. Should this fan need to be returned to the factory for

repairs, it must be shipped in its original packaging to ensure proper protection against damage that

might exceed the initial cause for return.

• Make sure all electrical connections comply with local codes, ordinances, the National Electrical

Code and ANSI/NFPA 70-1999. Hire a qualified electrician or consult a do-it-yourself wiring

handbook if you are unfamiliar with installing electrical wiring.

• Make sure the installation site you choose allows a minimum clearance of 7 ft. from the blades to the

floor and at least 30 in. from the end of the blades to any obstruction.

• After you install the fan, make sure all connections are secure to prevent the fan from falling.

• The net weight of this fan including the light kit is: 20.72 lbs.

SAFETY INFORMATION

To reduce the risk of fire, electrical shock or personal injury, mount fan to outlet box

marked "ACCEPTABLE FOR FAN SUPPORT OF 35 LBS. (15.9 KG) OR LESS" and use

mounting screws provided with the outlet box. Most outlet boxes commonly used for the

support of lighting fixtures are not acceptable for fan support and may need to be replaced.

Consult a qualified electrician if in doubt.

When mounting fan to a ceiling outlet box, use a METAL octagonal outlet box; do NOT use a

plastic outlet box. Secure the outlet box directly to the building structure. The outlet box and its

support must be able to support the moving weight of the fan (at least 35 lbs.).

To avoid personal injury, the use of gloves may be necessary while handling fan parts with

sharp edges.

To reduce the risk of fire, electrical shock or personal injury, wire connectors provided with this fan

are designed to accept only one 12-gauge house wire and two lead wires from the fan. If your

house wire is larger than 12-gauge or there is more than one house wire to connect to the

corresponding fan lead wires, consult an electrician for the proper size wire connectors to use.

To reduce the risk of fire or electrical shock, do not use the fan with any solid state speed control

device or control fan speed with a full range dimmer switch.

To reduce the risk of fire, electrical shock or personal injury, do not bend the blade arms when

installing them, balancing the blades or cleaning the fan. Do not insert objects between the

rotating fan blades.

To reduce the risk of personal injury, use ONLY parts provided with this fan. The use of parts

OTHER than those provided with this fan will void the warranty.

Before installation, be sure to shut off electricity at main switch or circuit breaker in order to avoid

electrical shock.

WARNING

DANGER

CAUTION

When using an existing outlet box, make sure the outlet box is securely attached to the building

structure and can support the full weight of the fan. Failure to do this can result in serious injury or

death. The stability of the outlet box is essential in minimizing wobble and noise in the fan after

installation is complete.

To reduce the risk of serious bodily injury, DO NOT use power tools to assemble any part of the

fan, including the blades.

Be sure outlet box is properly grounded and that a ground wire (green or bare) is present.

Before beginning installation, carefully check all screws, bolts and nuts on fan motor assembly to

ensure they are secure.

NOTE: Dimmable to 10% with select dimmers. See Lowes.com for more information.

L Canopy Mounting Screw 4

(preassembled)

M Pin (preassembled) 1

N Clip (preassembled) 1

O Star Washer 4

(preassembled)

P Light Kit Fitter Screw 3

(preassembled)

Q Light Kit Fitter 1

R Socket Ring 4

(preassembled)

IMPORTANT REMINDER: You must use

the parts provided with this fan for proper

installation and safety.

PACKAGE CONTENTS

A Downrod 1

B Canopy 1

C Mounting Bracket 1

(preassembled)

D Motor Housing 1

E Glass Shade 4

F Blade 5

G Blade Arm 5

H Balancing Kit 1

I Motor Screw 10

(preassembled) + 1 extra

J Bulb 4

K Lock Washer 10

(preassembled) + 1 extra

DESCRIPTIONPART QUANTITY DESCRIPTIONPART QUANTITY

HARDWARE CONTENTS (shown actual size)

Fiber

Blade

Washer

Qty. 15

+ 1 extra

Blade

Screw

Qty. 15

+ 1 extra

Wire

Connector

Qty. 4

AA BB CC

PREPARATION

Before beginning assembly of product, make sure all parts are present. Place motor on carpet or on

foam to avoid damage to ﬁnish. Compare parts with package contents list and hardware contents list.

If any part is missing or damaged, do not attempt to install, operate or assemble the product.

Estimated Assembly Time: 120 minutes

Tools Required forAssembly (not included): Electrical Tape, Phillips Screwdriver, Pliers, Safety

Glasses, Stepladder and Wire Strippers

Helpful Tools (not included): AC Tester Light, Tape Measure, Do-It-Yourself Wiring Handbook and

Wire Cutters

Pull Chain

Extension

Qty. 2

Turn off circuit breakers and wall switch to the fan

supply line leads.

DANGER: Failure to disconnect power supply

prior to installation may result in serious injury or

death.

Determine mounting method to use.

A. Downrod mount (standard or angled ceiling)

B. Closemount (standard ceiling only)

IMPORTANT: If using the angle mount, check to

make sure the ceiling angle is not steeper than 19°.

*Helpful Hint: Downrod-style mounting is best

suited for ceilings 8 ft. or higher. For taller ceilings

you may want to use a longer downrod (not

included). Angle-style mounting is best suited for

angled or vaulted ceilings. A longer downrod is

sometimes necessary to ensure proper blade

clearance.

INITIAL INSTALLATION

OFF

19° max.

Check to make sure blades (F) will be at least

30 in. from any obstruction and at least 7 ft.

above the floor.

7 ft.

min.

30 in.

min.

Secure mounting bracket (C) to outlet box (not

included) using screws, spring washers and flat

washers provided with the outlet box.

*NOTE: It is very important you use the proper

hardware when installing the mounting bracket

IMPORTANT: If using the angle mount, make

sure open end of mounting bracket (C) is

installed facing the higher point of the ceiling, and

ensure the ceiling angle is not steeper than 19°.

4b.

INITIAL INSTALLATION

5. Remove motor screws (I) and lock washers (K)

from underside of motor housing (D). [If there are

plastic motor blocks installed with the motor

screws (I) and lock washers (K), discard the

plastic motor blocks.]

For DOWNROD-STYLE FAN MOUNTING,

proceed to Step 1 on the following page. For

CLOSEMOUNT-STYLE FAN MOUNTING, skip to

page 10.

Plastic Motor Block

4a. Loosen canopy mounting screws (L) in slotted

holes of canopy (B) and remove the other two

canopy mounting screws (L) and star washers

(O). Save for later use.

Remove mounting bracket (C) from canopy (B).

4a C

Open End

ANGLE MOUNTSTANDARD

MOUNT

2. Insert downrod (A) through canopy (B). Thread

wires from motor housing (D) up through downrod

(A).

DOWNROD-STYLE FAN MOUNTING

Slip downrod (A) into yoke, align holes and

re-install pin (M) and clip (N). Tighten set screws in

yoke and then tighten nut and set screws.

Set Screw

and Nut

Remove pin (M) and clip (N) from downrod (A).

Partially loosen preassembled set screws and nut

in yoke at top of motor housing (D).

Yoke

Set Screw

and Nut

Sideview

Depending on the length of downrod you use,

you may need to cut the lead wires back to

simplify the wiring. If you decide to cut back the

lead wires, it is suggested you do so in the

following manner:

Take the lead wires and make sure you have

pulled them all the way through the top of the

downrod (A). Start at the TOP of the ball on the

downrod (A) and measure 8 in. of lead wire, and

then cut the excess wire off with wire cutters (not

included).

NOTE: If you do not cut back the lead wires,

Steps 4 and 5 are not necessary and you may

proceed to Step 6 instead.

Ball

Install ball end of downrod (A) into opening of

mounting bracket (C). Align slot in ball with tab in

mounting bracket (C).

DANGER: Failure to align slot in ball with tab

may cause the fan to wobble or fall, which could

result in serious injury or death.

Continue to WIRING on page 11.

DOWNROD-STYLE FAN MOUNTING

If you decided to cut back the lead wires in Step 4,

strip 1/2 in. of insulation from end of white wire.

Twist stripped ends of each strand of wire within

the insulation with pliers (not included). Repeat

Step 5 for black, blue (if applicable) and green

wires.

Slot

Tab

Remove preassembled canopy cover from bottom

of canopy (B). NOTE: It may be necessary to use

a screwdriver (not included) to remove the canopy

cover by tapping on the canopy cover from the

inside of the canopy (B).

NOTE: The downrod (A) and canopy cover are

not used in this type of installation.

Remove every other preassembled screw and lock

washer from top of motor housing (D).

CLOSEMOUNT-STYLE FAN MOUNTNG

Pull wires up through hole in the middle of the

canopy (B) and attach canopy (B) to motor

housing (D) using the three previously removed

screws and lock washers.

Canopy

Cover

Screw

Lock Washer

Screw

Lock

Washer

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Harbor Breeze Lüfter Handbücher

Harbor Breeze

Harbor Breeze 40107 Bedienungsanleitung

Harbor Breeze

Harbor Breeze QUIMBY LP8078LAZ Bedienungsanleitung

Harbor Breeze

Harbor Breeze MAZON MZ44BNK3LR Bedienungsanleitung

Harbor Breeze

Harbor Breeze PRESTWICK 42868 Bedienungsanleitung

Harbor Breeze

Harbor Breeze LARALYN LRN32 Bedienungsanleitung

Harbor Breeze

Harbor Breeze 42224 Bedienungsanleitung

Harbor Breeze

Harbor Breeze BTH44ABZC5C Bedienungsanleitung

Harbor Breeze

Harbor Breeze LAKE PLACIDO CPK1261 Bedienungsanleitung

Harbor Breeze

Harbor Breeze E-ER56ORB3LKLR Bedienungsanleitung

Harbor Breeze

Harbor Breeze BELLHAVEN II E-BLHII52VPW5C4S Bedienungsanleitung

Harbor Breeze

Harbor Breeze CUMBERLAND 42476 Bedienungsanleitung

Harbor Breeze

Harbor Breeze MAYFIELD BTH44AB5CS Bedienungsanleitung

Harbor Breeze

Harbor Breeze E-WCK44ABZ5LKS Bedienungsanleitung

Harbor Breeze

Harbor Breeze 42299 Bedienungsanleitung

Harbor Breeze

Harbor Breeze CLRO52-II Bedienungsanleitung

Harbor Breeze

Harbor Breeze DUBOIS DM52BCP5CS Bedienungsanleitung

Harbor Breeze

Harbor Breeze BELCARRA CE-JP13BNK6RC Bedienungsanleitung

Harbor Breeze

Harbor Breeze 80210 Bedienungsanleitung

Harbor Breeze

Harbor Breeze 0228113 Bedienungsanleitung

Harbor Breeze

Harbor Breeze BTH44ABZC5C Bedienungsanleitung

Harbor Breeze

Harbor Breeze MARICOPA LP8013LAZ Bedienungsanleitung

Harbor Breeze

Harbor Breeze CLASSIC STYLE 00819 Bedienungsanleitung

Harbor Breeze

Harbor Breeze C-TR56BNK3D1R Bedienungsanleitung

Harbor Breeze

Harbor Breeze WO52BB5C Bedienungsanleitung

Beliebte Lüfter Handbücher anderer Marken

ELTA FANS

ELTA FANS H03VV-F Bedienungsanleitung

Hunter

Hunter 20714 Gebrauchsanweisung

Emerson

Emerson CARRERA VERANDA CF542ORB00 Bedienungsanleitung

Hunter

Hunter Caraway Gebrauchsanweisung

Panasonic

Panasonic FV-15NLFS1 Bedienungsanleitung

Kompernass

Kompernass KH 1150 Bedienungsanleitung

VES

VES FALA100/12V/TR Bedienungsanleitung

Vertiv

Vertiv Liebert DCD Bedienungsanleitung

Westinghouse

Westinghouse GFP Series Bedienungsanleitung

Venmar

Venmar KUBIX HRV PLUS Series Bedienungsanleitung

Maico

Maico ECR 31 Bedienungsanleitung

Sonnenkonig

Sonnenkonig Dinky Bedienungsanleitung

S&P

S&P ECOWATT HXBR Bedienungsanleitung

Wider

Wider IMP03369BH Bedienungsanleitung

Panasonic

Panasonic F-60DHN Bedienungsanleitung

Hinkley

Hinkley HIGHLAND Bedienungsanleitung

Broan

Broan 766BN Bedienungsanleitung

Premium

Premium PFS16022 Montageanleitung