Harbor Breeze CPW1413 Bedienungsanleitung

LAKE CYPRESS CEILING FAN

ITEM #0747615

MODEL#CPW1413

Español p. 20

Serial Number Purchase Date

Questions, problems, missing parts? Before returning to your retailer, call our customer

service department at 1-800-643-0067, 8 a.m. - 6 p.m., EST, Monday - Thursday,

8 a.m. - 5 p.m., EST, Friday.

AB15776

ATTACH YOUR RECEIPT HERE

Lowes.com/harborbreeze

Harbor Breeze®is a registered trademark

TABLE OF CONTENTS

Package Contents...............................................................................................................

Hardware Contents.............................................................................................................

Safety Information...............................................................................................................

Preparation .........................................................................................................................

Initial Installation Instructions...............................................................................................

WiringInstructions................................................................................................................

Final Installation Instructions................................................................................................

Operating Instructions..........................................................................................................

Care and Maintenance .......................................................................................................

Troubleshooting...................................................................................................................

Limited Lifetime Warranty....................................................................................................

Replacement Parts List ......................................................................................................

Lowes.com/harborbreeze

PACKAGE CONTENTS

PART DESCRIPTION QUANTITY

A Mounting Bracket 1

B Downrod Assembly 1

C Canopy 1

Canopy Cover

(preassembled on

Canopy (C))

E Coupling Cover 1

FMotor Housing 1

Blade Holder

H Blade 5

I Switch Housing 1

PART DESCRIPTION QUANTITY

JLight Kit 1

K Glass Assembly

L Bulb 3

MPower Kit 1

N Balance Kit 1

Clevis Pin

(preassembled on

Motor Housing (F))

Lowes.com/harborbreeze

PHairpin Clip

(preassembled on

Motor Housing (F))

QCoupling Screw

(preassembled on

Motor Housing (F))

ON D IP

4321

HARDWARE CONTENTS

AA BB

SAFETY INFORMATION

READ AND SAVE THESE INSTRUCTIONS

Please read and understand this entire manual before attempting to assemble, operate or install the

product.

All electrical connections must comply with local codes, ordinances or the National Electric Code

(NEC). Contact your municipal building department to inquire about your local codes, permits and/or

inspections.

Turn off electricity at the main fuse box (or circuit breaker box) before beginning installation by

removing the fuse or by switching off the circuit breaker.

Do not connect this to an electrical system that does not provide a means for equipment

grounding. Never use a in a two-wire system that is not grounded.

If you are not sure your lighting system has a grounding means, do not attempt to install this

Contact a licensed electrician for information regarding proper grounding methods as

required by the local electrical code in your area.

Make sure the installation site you choose allows a minimum clearance of 7 ft. from the blades to the

and at least 30 in. from the ends of the blades to any obstruction.

Secure the outlet box directly to the building structure. The outlet box and its support must be able to

support the moving weight of the fan (at least 35 Ibs.).

If a dimmer control switch is used with this obtain professional advice to determine the correct

type and electrical rating required.

The lighting must be positioned so there is at least 1.64 ft. between the bulb and any illuminated

surface.

For supply connections, if the conductor of a fan is as a grounded conductor, then it should

be connected to a grounded conductor power supply. If the conductor of a fan is as an

ungrounded conductor, then it should be connected to an ungrounded conductor power supply. If the

conductor of a fan is for equipment grounding, then it should be connected to an equipment-

grounding conductor.

All must be mounted to a 4 in. x 4 in. x 2-1/8 in. deep metal outlet box that is supported by

the building structure. Do not attempt to support the by ceiling board alone. The ceiling board

alone does not have the strength to support the weight of the The could fall and cause

personal injury.

Do not use bulbs having a wattage greater than the maximum value stated on the and in this

manual. Using a higher wattage bulb than will increase temperature and increase

risk of

CAUTION

Lowes.com/harborbreeze

Blade Screw

Qty. 15 + 1 Extra

Motor Screw

Qty. 10 (5 preassembled) + 1 Extra

WARNING

DANGER

Risk of Most dwellings built before 1985 have supply wire rated for 140°F. Consult a

electrician before installation.

Wire connectors will not support the weight of a suspending a by the house wires and

wire connectors will result in the falling, with the possibility of personal injury and the danger

of electrical shock or

To reduce the risk of or electric shock, do not use this fan with any solid state fan speed device or

variable speed control.

To reduce the risk of personal injury, do not bend the blade brackets when installing the brackets,

balancing or cleaning the fan.

Do not insert foreign objects in between rotating fan blades.

Do not install or use the fan if any part is damaged or missing.

To reduce the risk of electrical shock or personal injury, mount to outlet box marked “ACCEPTABLE

FOR FAN SUPPORT OF 35 LBS OR LESS” and use mounting screws provided with the outlet box

and/or support directly from building structure. Most outlet boxes commonly used for the support

of luminaries are not acceptable for fan support and may need to be replaced. Consult a

electrician if in doubt.

Before servicing or cleaning the unit, switch power off at the service panel and lock the service

disconnecting means to prevent power from being switched on accidentally. When the service

disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag,

to the service panel.

Installing a into an electrical system without a proper grounding means could allow metal parts

of the to carry electrical currents. If any of the wires, wire connections or splices are

broken, cut or loose during the mounting or normal operation of the under such condition,

anyone coming in contact with the is subject to electrical shock, which could cause serious

injury or death.

Connection of the bare or green ground wire to the black or white house wires may allow metal

parts of the to carry electrical currents. Under this condition anyone coming in contact with the

will receive electrical shock, which could cause serious injury or death.

Be careful not to damage or cut the wire insulation (covering) during installation. Do not permit

wires to have contact with any surface having a sharp edge. Doing so may damage or cut the wire

insulation, which could cause serious injury or death from electric shock.

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package

contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble

the product.

Estimated Assembly Time: 45 minutes

Tools Required for Assembly (not included): Philips Screwdriver, Step Ladder, Tape, Pliers and

Wire Cutters.

Lowes.com/harborbreeze

INITIAL INSTALLATION INSTRUCTIONS

1. Turn off circuit breakers and wall switch to the fan

supply line leads.

2. Choose the desired mounting method:

3. Check existing outlet box (not included) to ensure it is

securely fastened to at least two points in a structural

ceiling member and can support the full weight of

)A(tekcarbgnitnuomllatsni,deifirevecnO.nafeht

the outlet box using the screws and washers provided

with the outlet box.

Note: If using the angle mount, make sure open end

of mounting bracket (A) points toward the ceiling.

DANGER:

Failure to disconnect power supply

prior to installation may result in serious injury or

death.

DANGER: A loose outlet box can cause the

fan to wobble and increase the fan’s potential to fall,

which could result in serious injury or death.

A. Standard Mounting:

Standard mounting is best suited for ceilings 8 feet.

or higher. For taller ceilings you may want to use a

longer downrod (not included).

Angle Mounting:

Angle-style mounting is best suited for angled or

vaulted ceilings. A longer downrod is sometimes

necessary to ensure proper blade clearance. If

using the angle mount, make sure the ceiling angle

is not steeper than 20°.

Flush Mounting:

Flushmount installation is used for ceilings less

than 8 feet high.

Lowes.com/harborbreeze

3Standard/Flush

Mounting

Angle

Mounting

For ALL mounting options, there must be at least

30 inches from the blade tip to nearest wall. Also,

ensure there is 7 feet from the bottom edge of the

blade to the floor.

Turn Off Power Source

4. Remove hairpin clip (P) and clevis pin (O) from the

coupling in motor housing (F). Retain for later use.

Loosen the two coupling screws (Q), but do not

remove them.

Note: Make sure to keep loose hardware separate to

avoid confusion during installation.

For STANDARD/ANGLE-MOUNTING

INSTRUCTIONS, proceed to step 1 below.

For FLUSHMOUNT INSTRUCTIONS, skip to page 8.

1. Insert downrod assembly (B) through canopy (C),

canopy cover (D) and coupling cover (E).

2. Feed power wires from motor housing (F) through

(B) into the coupling on motor housing (F).

INITIAL INSTALLATION INSTRUCTIONS

STANDARD/ANGLE-MOUNTING INSTRUCTIONS

Coupling

4Note: Motor wires have been

omitted from diagram.

Lowes.com/harborbreeze

WARNING: Ensure all screws are tight before

moving on to the next step.

Coupling

downrod assembly (B), then insert downrod assembly

Align the hole on downrod assembly (B) to the hole on

the

coupling, then re-install clevis pin (O). Re-attach

hairpin clip (P) into clevis pin (O) until it snaps into

place, then tighten the two previously loosened

coupling screws (Q).

3. Cut off excess wires approximately 6 to 9

inches above top of the downrod assembly (B).

Strip insulation off 1/2 in. from the end of each

wire.

STANDARD/ANGLE-MOUNTING INSTRUCTIONS

FLUSHMOUNT INSTRUCTIONS

Lowes.com/harborbreeze

6 to 9 in.

4. Carefully lift the fan and place the hanger ball of

downrod assembly (B) in the mounting bracket (A)

attached to the outlet box.

1. Remove canopy cover (D) by pressing out on the inner

edges until it releases from the canopy (C).

NOTE: Be sure the slot in the hanger ball is lined up

with the tab on the mounting bracket (A).

DANGER: Be careful when aligning the tab to the

slot! If not fully engaged, there is a possiblity of the

fan falling, which may result in serious injury or death.

Proceed to WIRING on page 10.

Tab

Slot

FLUSHMOUNT INSTRUCTIONS

Lowes.com/harborbreeze

Remove the three preassembled Phillips screws

near the coupling on the motor housing (F). Save them

for future use. Guide motor wires through the base of the

canopy (C), then attach canopy (C) to motor housing (F)

with previously removed screws. Tighten securely.

3. Raise assembly and temporarily place one side of

canopy (C) onto hook of mounting bracket (A). This will

allow for hands-free wiring.

Proceed to WIRING on page 10.

Screws

Coupling

1. To sync the remote from power kit (M) to the receiver

also in power kit (M), remove the battery

cover from the remote and slide code switches to

your choice of up or down position using a small

screwdriver or ballpoint pen (neither included).

Note: The factory setting for the code switches is

all up; do not use this position.

WIRING INSTRUCTIONS

WARNING: To avoid possible electrical shock, be sure electricity is turned off at the main fuse

box before hanging.

WARNING: If house wires are of different colors than referred to in the following steps, stop

immediately. A professional electrician is recommended to determine proper wiring.

Note: If you are not sure if the outlet box is grounded, contact a licensed electrician for advice, as it

must be grounded for safe operation.

Note: The remote from power kit (M) has 16 different code combinations. To prevent possible

interference from or to other remote units, simply change the combination code in your remote and

receiver as described in Step 1 below.

1 2 3 4

DIP

Remote Receiver

Lowes.com/harborbreeze

2. Slide the receiver from the power kit (M) into the open

end of the mounting bracket (A) with the side of

the receiver facing the ceiling.

Receiver

Slide the code switches on the receiver to the same

positions, then replace battery cover on the remote.

Inhaltsverzeichnis

Andere Harbor Breeze Lüfter Handbücher

Harbor Breeze

Harbor Breeze TIEMPO E-TM52BNK5CS Bedienungsanleitung

Harbor Breeze

Harbor Breeze CENTREVILLE 40117 Bedienungsanleitung

Harbor Breeze

Harbor Breeze NAVIN 41555 Bedienungsanleitung

Harbor Breeze

Harbor Breeze RC103L Bedienungsanleitung

Harbor Breeze

Harbor Breeze ECHOLAKE 42080 Bedienungsanleitung

Harbor Breeze

Harbor Breeze BELLEVUE E-BE44ABZ5C Bedienungsanleitung

Harbor Breeze

Harbor Breeze Bath Ventilator with Light Bedienungsanleitung

Harbor Breeze

Harbor Breeze MAZON MZ44BNK3LR Bedienungsanleitung

Harbor Breeze

Harbor Breeze AFTONSHIRE Bedienungsanleitung

Harbor Breeze

Harbor Breeze LAKE PLACIDO CPK1261 Bedienungsanleitung

Harbor Breeze

Harbor Breeze FLANAGAN II 42477 Bedienungsanleitung

Harbor Breeze

Harbor Breeze CHESHIRE II CSD52BB5C4 Bedienungsanleitung

Harbor Breeze

Harbor Breeze 0184428 Bedienungsanleitung

Harbor Breeze

Harbor Breeze Santa Ana LP8294LBN Bedienungsanleitung

Harbor Breeze

Harbor Breeze TOWNSEND LP8018LAZ Bedienungsanleitung

Harbor Breeze

Harbor Breeze 80210 Bedienungsanleitung

Harbor Breeze

Harbor Breeze WAVEPORT STYLE E-WK52NWZ5C1 Bedienungsanleitung

Harbor Breeze

Harbor Breeze BUILDER'S SERIES 40698 Bedienungsanleitung

Harbor Breeze

Harbor Breeze CLASSIC STYLE BDB52LW5N Bedienungsanleitung

Harbor Breeze

Harbor Breeze MAZON MZ44MBK3LR Bedienungsanleitung

Harbor Breeze

Harbor Breeze 856 Bedienungsanleitung

Harbor Breeze

Harbor Breeze 41182 Bedienungsanleitung

Harbor Breeze

Harbor Breeze 80202 Bedienungsanleitung

Harbor Breeze

Harbor Breeze Cape Coast E-YLM52WW5C1 Bedienungsanleitung

Beliebte Lüfter Handbücher anderer Marken

ELTA FANS

ELTA FANS H03VV-F Bedienungsanleitung

Hunter

Hunter 20714 Gebrauchsanweisung

Emerson

Emerson CARRERA VERANDA CF542ORB00 Bedienungsanleitung

Hunter

Hunter Caraway Gebrauchsanweisung

Panasonic

Panasonic FV-15NLFS1 Bedienungsanleitung

Kompernass

Kompernass KH 1150 Bedienungsanleitung

VES

VES FALA100/12V/TR Bedienungsanleitung

Vertiv

Vertiv Liebert DCD Bedienungsanleitung

Westinghouse

Westinghouse GFP Series Bedienungsanleitung

Venmar

Venmar KUBIX HRV PLUS Series Bedienungsanleitung

Maico

Maico ECR 31 Bedienungsanleitung

Sonnenkonig

Sonnenkonig Dinky Bedienungsanleitung

S&P

S&P ECOWATT HXBR Bedienungsanleitung

Wider

Wider IMP03369BH Bedienungsanleitung

Panasonic

Panasonic F-60DHN Bedienungsanleitung

Hinkley

Hinkley HIGHLAND Bedienungsanleitung

Broan

Broan 766BN Bedienungsanleitung

Premium

Premium PFS16022 Montageanleitung