Harbor Breeze MARINA COVE II Bedienungsanleitung

4009218

Harbor Breeze® is a registered trademark

ITEM #0275422

2889554

MODEL #JP18BZ3

JP18TI3

ATTACH YOUR RECEIPT HERE

Purchase Date

RR20391

Español p. 14

MARINA COVE II

Questions, problems, missing parts? Before returning to your retailer, call our customer

service department at 1-888-251-1003, 8 a.m. - 8 p.m., EST, Monday - Sunday. You could also

READ AND SAVE THESE INSTRUCTIONS

TABLE OF CONTENTS

SAFETY INFORMATION

• Do not discard fan carton or foam inserts. Should this fan need to be returned to the factory for

repairs, it must be shipped in its original packaging to ensure proper protection against damage

that might exceed the initial cause for return.

• Make sure all electrical connections comply with local codes, ordinances, the National Electrical

Code and ANSI/NFPA 70-1999. Hire a qualified electrician or consult a do-it-yourself wiring

handbook if you are unfamiliar with installing electrical wiring.

• Make sure the installation site you choose allows a minimum clearance of 7 ft. from the blades to

the floor.

• After you install the fan, make sure that all connections are secure to prevent the fan from falling.

• The net weight of this fan is: 21 lbs.

Safety Information ...............................................................................................................

Package Contents ...............................................................................................................4

Hardware Contents .............................................................................................................

Preparation ..........................................................................................................................

Assembly Instructions .........................................................................................................6

Operating Instructions ......................................................................................................

Care and Maintenance ......................................................................................................12

Troubleshooting .................................................................................................................12

Limited Lifetime Warranty ..................................................................................................13

SAFETY INFORMATION

To reduce the risk of fire, electrical shock or personal injury, use the metal wall

mounting bracket provided with the fan. Secure the wall mounting bracket directly to the

building structure on a wood stud or wood post or beam. Do not install directly to drywall.

The wood stud or wood post and its support must be able to support the moving weight of the fan

(at least 50 lbs.). The stud or wood beam must be supported directly by the building structure. Do

NOT use any other wall mounting bracket other than the one provided.

To avoid personal injury, the use of gloves may be necessary while handling fan parts with

sharp edges.

To reduce the risk of fire or electrical shock, do not use the fan with any solid state speed control

device or control fan speed with a full range dimmer switch.

To reduce the risk of personal injury or electrical shock, the fan should be installed where it will be

out of reach of children. The fan is NOT a toy -- DO NOT play with the fan or allow anyone else to

play with the fan.

To reduce the risk of personal injury or electrical shock, do not operate the fan if the cord or plug

has been damaged.

To reduce the risk of fire, avoid the use of an extension cord. If an extension cord is used, it must

be UL- or ETL-listed; NEVER use more than one extension cord to operate the fan.

To reduce the risk of personal injury, use only parts provided with this fan. The use of parts

OTHER than those provided with this fan will void the warranty.

WARNING

CAUTION

Before proceeding, be sure to shut off electricity at main switch or circuit breaker in order to avoid

electrical shock.

Read all instructions and safety information before installing your new fan. Review the

accompanying assembly diagrams.

Due to the bulkiness of the fan assembly, it is advisable to seek the help of another person in order

to install the fan asembly in the safest, most efficient manner.

PACKAGE CONTENTS

IMPORTANT REMINDER: You must use the

parts provided with this fan for proper installation

and safety.

A Fan Assembly 1

B Wall Mounting Bracket 1

C Front Cage 1

D Blade Assembly 1

E Back Cage 1

F Blade Assembly Nut 1

(preassembled)

G Back Cage Screw 3

(preassembled)

DESCRIPTIONPART QUANTITY DESCRIPTIONPART QUANTITY

H Front Cage Screw 6

(preassembled)

I Pull Chain 1

(preassembled)

J Power Cord 1

(preassembled)

K Decorative Nut 1

(preassembled)

L Fuse (Included) 1

Before beginning assembly of product, make sure all parts are present. Compare parts with package

contents list and hardware contents list. If any part is missing or damaged, do not attempt to

assemble the product.

Estimated Assembly Time: 90 minutes

Tools Required for Assembly (not included): Phillips Screwdriver, Drill, Drill Bit, Stud Finder, Flathead

Screwdriver, Pliers, Wrench, Safety Glasses, Tape Measure and Stepladder

Helpful Tools (not included): Level, Pencil, Do-It-Yourself and Wiring Handbook

DANGER: Make sure the wall mounting bracket is securely attached to the building structure and

can support the full weight of the fan. Failure to do this can result in serious injury or death.

After opening top of carton, remove mounting hardware package from foam inserts. Remove fan

assembly from packing and place on carpet or on foam to avoid damage to ﬁnish.

CAUTION: Carefully check all screws, bolts and nuts on fan assembly to ensure that they are

secured.

PREPARATION

Wood

Screw

Qty. 4

+ 1 extra

HARDWARE CONTENTS (shown actual size)

Turn off circuit breakers and wall switch to the fan

supply line leads.

DANGER: Failure to disconnect power supply

prior to installation may result in serious injury or

death.

ASSEMBLY INSTRUCTIONS

OFF

7 ft

min.

This fan assembly (A) can only be mounted on an

indoor wall or on an enclosed porch or enclosed

patio wall.

To prevent personal injury and damage, ensure

that the hanging location allows the fan assembly

(A) a clearance of 7 ft. from the floor to prevent

accidental contact with the blade.

CAUTION: If you are going to attach the fan

assembly (A) to a wood stud or wood post, the

stud or wood post must be wide enough and thick

enough to sustain the wall mounting bracket (B)

and the weight of the fan assembly (A).

Determine the approximate position of where you

want the fan to be located on the wall. Then,

locate the stud in the wall. Position wall mounting

bracket (B) on wood stud or wood post and mark

the location of the four holes using a pencil or a

marker (not included).

WARNING: To reduce the risk of fire,

electrical shock or personal injury, use all four

mounting holes (two at the top and two at the

bottom) in wall mounting bracket (B) when

installing wall mounting bracket (B).

Stud

7 Ft.

Wood Screw x 4

Hardware Used

Stud

4. Use 3/32-in. drill bit (not included) to drill pilot

holes at marked locations. Then, install wall

mounting bracket (B) to mounting surface with

wood screws (AA).

WARNING: It is very important that you use

the proper hardware when installing the wall

mounting bracket (B) as this will support the fan

assembly (A).

5. Remove set screw at bottom of fan assembly (A).

With the wall mounting bracket (B) secured to the

wall and able to support the fan assembly (A), you

are now ready to hang the fan assembly (A).

Grab the fan assembly (A) firmly with two hands.

Align the four slots in the middle of the back of the

fan assembly (A) with the four hooks on the wall

mounting bracket (B) and then pull down firmly on

fan assembly (A).

WARNING: Failure to make sure all four

hooks on the wall mounting bracket (B) have

engaged completely with the four slots in the fan

assembly (A), and that the fan assembly (A) is

stable may result in injury or death.

ASSEMBLY INSTRUCTIONS

Slots

Hooks

Set

Screw

Replace set screw at bottom of fan assembly (A).

Tighten securely.

6. 6

Set

Screw

Install the three back cage screws (G)

previously removed into each of the three

holes in the center of the back cage (E) to

secure back cage (E) to motor on fan

assembly (A).

9. 9

7. 7

ASSEMBLY INSTRUCTIONS

Align the three holes on the outer edge of the

motor on fan assembly (A) with the three holes

in the center of the back cage (E).

8. 8

Remove the three back cage screws (G)

from the outer edge of the motor on fan

assembly (A)

Turn blade assembly nut (F) clockwise to remove

from shaft on fan motor. 10

10.

Re-attach blade assembly nut (F) into center of

blade assembly (D) and turn counterclockwise to

secure.

12.

Motor

ASSEMBLY INSTRUCTIONS

Partially loosen preassembled set screw on blade

assembly (D). Place blade assembly (D) over motor

shaft and lock pin, making sure to align gap on the

blade assembly (D) with lock pin on motor. Turn set

screw located on the blade assembly (D) clockwise

to secure blade assembly (D) to fan motor.

11.

Set

screw

Gap

Shaft

Lock

Shaft

Plug

Insert power cord (J) preassembled on fan

assembly (A) into proper wall outlet.

WARNING: The power cord is equipped

with a three-prong grounded plug that must

be inserted into a matching receptacle. Under

no circumstances must the grounding prong

be cut off the plug. Where a two-prong wall

receptacle is encountered, it must be

replaced with a properly grounded

three-prong receptacle installed in

accordance with the National Electrical Code

and all applicable local codes and

ordinances.This work must be done only by a

qualified electrician, using copper wire only.

Hook

Remove all six front cage screws (H) from edge of

back cage (E).

Place hook at top of front cage (C) over edge at top

of back cage (E). NOTE: Make sure hook engages

and all front and back cage holes match up; this will

allow the front cage (C) and the back cage (E) to

hang together while you re-insert the front cage

screws (H) into the the front and back cage holes.

Insert front cage screws (H) into both holes at top of

front cage (C), then tighten. Insert remaining front

cage screws (H). Tighten front cage screws (H),

alternating from one side of front cage (C) to the

other until all front cage screws (H) are completely

secured.

13.

ASSEMBLY INSTRUCTIONS

14. 14

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Harbor Breeze Lüfter Handbücher

Harbor Breeze

Harbor Breeze HTD21011 Bedienungsanleitung

Harbor Breeze

Harbor Breeze WAVEPORT STYLE E-WK52NWZ5C1 Bedienungsanleitung

Harbor Breeze

Harbor Breeze 40680 Bedienungsanleitung

Harbor Breeze

Harbor Breeze E-BDB52ABZC5BC4N Bedienungsanleitung

Harbor Breeze

Harbor Breeze 40105 Bedienungsanleitung

Harbor Breeze

Harbor Breeze CGR60WW3LR Bedienungsanleitung

Harbor Breeze

Harbor Breeze MAYFIELD BTH44AB5CS Bedienungsanleitung

Harbor Breeze

Harbor Breeze 872 Bedienungsanleitung

Harbor Breeze

Harbor Breeze FREEPORT LP8079LAZ Bedienungsanleitung

Harbor Breeze

Harbor Breeze C-BTH44ABZC5L Bedienungsanleitung

Harbor Breeze

Harbor Breeze ARMITAGE CC52WW5C1 Bedienungsanleitung

Harbor Breeze

Harbor Breeze MAZON MZ44BNK3LR Bedienungsanleitung

Harbor Breeze

Harbor Breeze 40094 Bedienungsanleitung

Harbor Breeze

Harbor Breeze LYNSTEAD Bedienungsanleitung

Harbor Breeze

Harbor Breeze BELLEVUE E-BE44ABZ5C Bedienungsanleitung

Harbor Breeze

Harbor Breeze LANSING 40198 Bedienungsanleitung

Harbor Breeze

Harbor Breeze BRISTLE AR13-44BLK AR13-44BN Bedienungsanleitung

Harbor Breeze

Harbor Breeze E-WCK44ABZ5LKS Bedienungsanleitung

Harbor Breeze

Harbor Breeze KIAWAH Bedienungsanleitung

Harbor Breeze

Harbor Breeze 872 Bedienungsanleitung

Harbor Breeze

Harbor Breeze BTH44ABZC5C Bedienungsanleitung

Harbor Breeze

Harbor Breeze 42079 Bedienungsanleitung

Harbor Breeze

Harbor Breeze BELLHAVEN II E-BLHII52VPW5C4S Bedienungsanleitung

Harbor Breeze

Harbor Breeze TIEMPO E-TM52BNK5CS Bedienungsanleitung

Beliebte Lüfter Handbücher anderer Marken

ELTA FANS

ELTA FANS H03VV-F Bedienungsanleitung

Hunter

Hunter 20714 Gebrauchsanweisung

Emerson

Emerson CARRERA VERANDA CF542ORB00 Bedienungsanleitung

Hunter

Hunter Caraway Gebrauchsanweisung

Panasonic

Panasonic FV-15NLFS1 Bedienungsanleitung

Kompernass

Kompernass KH 1150 Bedienungsanleitung

VES

VES FALA100/12V/TR Bedienungsanleitung

Vertiv

Vertiv Liebert DCD Bedienungsanleitung

Westinghouse

Westinghouse GFP Series Bedienungsanleitung

Venmar

Venmar KUBIX HRV PLUS Series Bedienungsanleitung

Maico

Maico ECR 31 Bedienungsanleitung

Sonnenkonig

Sonnenkonig Dinky Bedienungsanleitung

S&P

S&P ECOWATT HXBR Bedienungsanleitung

Wider

Wider IMP03369BH Bedienungsanleitung

Panasonic

Panasonic F-60DHN Bedienungsanleitung

Broan

Broan 766BN Bedienungsanleitung

Premium

Premium PFS16022 Montageanleitung

Litex Industries

Litex Industries E-CGL52CB5C1 Bedienungsanleitung