Harbor Breeze MAZON MZ44MBK3LR Bedienungsanleitung

HARBOR BREEZE and logo design are

trademarks or registered trademarks of

Purchase Date

AS21351

Questions, problems, missing parts? Before returning to your retailer, call our customer

service department at 1-888-251-1003, 8 a.m. - 8 p.m., EST, Monday - Sunday. You could

also contact us at [email protected] or visit www.lowespartsplus.com.

4007498

ITEM #0807421

0807422

2599776

2807158

MAZON CEILING FAN

MODEL #MZ44BNK3LR

MZ44ORB3LR

MZ44WW3LR

MZ44MBK3LR

Español p. 18

ATTACH YOUR RECEIPT HERE

ADJUNTE SU RECIBO AQUÍ

Safety Information .................................................................................................................2

Package Contents ...............................................................................................................

Hardware Contents ...............................................................................................................6

Preparation .......................................................................................................................

Initial Installation ....................................................................................................................6

Wiring ..............................................................................................................................

....

Final Installation ...................................................................................................................10

Operating Instructions .........................................................................................................13

Care and Maintenance ......................................................................................................

.15

Troubleshooting ..................................................................................................................16

Limited Lifetime Warranty ...................................................................................................17

Replacement Parts List .....................................................................................................

.17

TABLE OF CONTENTS

Modifications not approved by the party responsible for compliance could void the user's authority to

operate the equipment.

*NOTE: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or more of the following measures:

* Reorient or relocate the receiving antenna.

* Increase the separation between the equipment and receiver.

* Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Distributed by: Litex Industries Inc., P.O. Box 535639, Grand Prairie, TX, 75053; 1-800-527-1292

The device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, (2) this device must accept any

interference received, including interference that may cause undesired operation.

NOTE: Dimmable to 10%.

SAFETY INFORMATION

READ AND SAVE THESE INSTRUCTIONS

• Do not discard fan carton or foam inserts. Should this fan need to be returned to the factory for

repairs, it must be shipped in its original packaging to ensure proper protection against damage that

might exceed the initial cause for return.

• Make sure all electrical connections comply with local codes, ordinances, the National Electrical

Code and ANSI/NFPA 70-1999. Hire a qualified electrician or consult a do-it-yourself wiring

handbook if you are unfamiliar with installing electrical wiring.

• Make sure the installation site you choose allows a minimum clearance of 7 ft. from the blades to

the floor and at least 30 in. from the end of the blades to any obstruction.

• After you install the fan, make sure all connections are secure to prevent the fan from falling.

• The net weight of this fan including the light kit is: 14.77 lbs.

To reduce the risk of fire, electrical shock or personal injury, mount fan to outlet box

marked "ACCEPTABLE FOR FAN SUPPORT OF 35 LBS. (15.9 KG) OR LESS" and use

mounting screws provided with the outlet box. Most outlet boxes commonly used for the

support of lighting fixtures are not acceptable for fan support and may need to be replaced.

Consult a qualified electrician if in doubt.

When mounting fan to a ceiling outlet box, use a METAL octagonal outlet box; do NOT use a

plastic outlet box. Secure the outlet box directly to the building structure. The outlet box and its

support must be able to support the moving weight of the fan (at least 35 lbs.).

To avoid personal injury, the use of gloves may be necessary while handling fan parts with

sharp edges.

To reduce the risk of fire, electrical shock or personal injury, wire connectors provided with this fan

are designed to accept only one 12-gauge house wire and two lead wires from the fan. If your

house wire is larger than 12-gauge or there is more than one house wire to connect to the

corresponding fan lead wires, consult an electrician for the proper size wire connectors to use.

To reduce the risk of fire or electrical shock, do not use the fan with any solid state speed control

device or control fan speed with a full range dimmer switch.

WARNING

DANGER

When using an existing outlet box, make sure the outlet box is securely attached to the building

structure and can support the full weight of the fan. Failure to do this can result in serious injury or

death. The stability of the outlet box is essential in minimizing wobble and noise in the fan after

installation is complete.

To reduce the risk of serious bodily injury, DO NOT use power tools to assemble any part of the

fan, including the blades.

SAFETY INFORMATION

To reduce the risk of fire, electrical shock or personal injury, do not bend the blades when

installing or balancing them, or cleaning the fan. Do not insert objects between the rotating fan

blades.

To reduce the risk of personal injury, use ONLY parts provided with this fan. The use of parts

OTHER than those provided with this fan will void the warranty.

Before installation, be sure to shut off electricity at main switch or circuit breaker in order to avoid

electrical shock.

WARNING

Be sure outlet box is properly grounded and that a ground wire (green or bare) is present.

Once installation is complete, carefully check all screws, bolts and nuts on fan motor assembly to

ensure that they are secured.

Read all instructions and safety information before installing your new fan. Review the

accompanying assembly diagrams.

Do NOT tamper with or attempt to repair LED component. The light source is designed for this

specific application and should not be serviced by untrained personnel. If any servicing is

required, call our customer service department.

CAUTION

PACKAGE CONTENTS

IMPORTANT REMINDER: You must use the

parts provided with this fan for proper installation

and safety.

A Mounting Plate 1

B Canopy Ring 1

C Motor Assembly 1

D Fitter Plate 1

E Shade 1

F Fitter Plate Screw 3

(preassembled)

G Blade 3

DESCRIPTIONPART QUANTITY

H LED Light Kit 1

I Mounting Plate Lock 4

Washer (preassembled)

JMounting Plate Screw 4

(preassembled)

K Motor Plate Screw 3

(preassembled)

L Remote Pack

DESCRIPTIONPART QUANTITY

HARDWARE CONTENTS (shown actual size)

Before beginning assembly of product, make sure all parts are present. Compare parts with package

contents list and hardware contents list. If any part is missing or damaged, do not attempt to

assemble the product.

Estimated Assembly Time: 120 minutes

Tools Required for Assembly (not included): Electrical Tape, Phillips Screwdriver, Pliers, Safety

Glasses, Stepladder and Wire Strippers

Helpful Tools (not included): AC Tester Light, Tape Measure, Do-It-Yourself-Wiring Handbook and

Wire Cutters

PREPARATION

AA CC

Wire

Connector

Qty. 3

+ 1 extra

Blade

Screw

Qty. 9

+ 1 extra

Fiber

Blade

Washer

Qty. 9

+ 1 extra

INITIAL INSTALLATION

Turn off circuit breakers and wall switch to the fan

supply line leads.

DANGER: Failure to disconnect power supply

prior to installation may result in serious injury or

death.

OFF

INITIAL INSTALLATION

Remove all three preassembled motor stabilization

pieces from motor assembly (C). The motor

stabilization pieces may be discarded at this time.

This fan can be mounted as a flushmount on a

regular (no-slope) ceiling only.

Check to make sure blades (G) will be at least

30 inches from any obstruction and at least 7 ft.

above the floor.

2. 2

7 ft.

min.

30 in.

min.

Secure mounting plate (A) to outlet box using

screws, spring washers, and flat washers provided

with the outlet box.

*NOTE: It is very important you use the proper

hardware when installing the mounting plate (A) as

this will support the fan.

Pull electrical wiring from outlet box through center

hole in the mounting plate (A).

4. 3

Motor

Stabilization

Piece

Lift motor assembly (C) to mounting plate (A).

Hang motor assembly (C) on j-hook on underside

of mounting plate (A). [IMPORTANT: Use one of

the non-slotted holes on the rim of the motor

assembly (C) to do so.]

This will allow motor assembly (C) to hang out of

the way while wiring.

With wider opening facing up, place canopy

ring (B) over top of motor assembly (C).

Allow canopy ring (B) to rest on top of motor

for the time being.

Motor

"J" Hook

INITIAL INSTALLATION

Locate mounting plate screw (J)/mounting plate

lock washer (I) on outer edge of mounting plate

(A) that is closest to the j-hook and remove that

mounting plate screw (J)/mounting plate lock

washer (I). Also, remove mounting plate screw

(J)/mounting plate lock washer (I) on outer edge

of mounting plate (A) directly opposite the one

that was just removed. Partially loosen the other

two mounting plate screws (J)/mounting plate

lock washers (I).

Non-slotted

Hole

"J" Hook

WIRING

WARNING: To reduce the risk of fire, electrical

shock, or personal injury, wire connectors provided

with this fan are designed to accept only one 12-gauge

house wire and two lead wires from the fan. If your

house wire is larger than 12-gauge or there is more

than one house wire to connect to the corresponding

fan lead wires, consult an electrician for the proper

size wire connectors to use.

CAUTION: Be sure outlet box is properly grounded

and that a ground (green or bare) wire is present.

IMPORTANT: For each wire connection below,

use one of the wire connectors (CC) provided,

making sure to screw wire connector (CC) on in a

clockwise direction.

Connect BLACK wire from fan to BLACK wire

from ceiling. Connect WHITE wire from fan to

WHITE wire from ceiling. Connect all GROUND

(GREEN) wires together from fan (on motor

assembly (C) and mounting plate (A)) to

BARE/GREEN wire from ceiling.

ROUND/GREEN (BARE)

WHITE

BLACK

HITE

D/G

REE

N (

BAR

GROUND/GREEN

BLACK

WHITE

FROM FAN

BLACK

WHITE

M FA

WHI

D/GREE

D/G

WHITE

BLACK

120 V Power

from ceiling

WARNING: The wires from the outlet box must be

connected to a corresponding color of the fan's wires.

Be sure wire colors match before making connections.

If house wires are different colors than referred to in

the following steps, stop immediately. A professional

electrician is recommended to determine wiring.

WARNING: Using a full range dimmer switch (not

included) to control fan speed will cause a loud

humming noise from fan. To reduce the risk of fire or

electrical shock, do NOT use a full range dimmer

switch to control fan speed.

NOTE: Black wire is hot power for fan. White

wire is common for fan and light kit. Green or

bare wire is ground.

Wire Connector x 3

Hardware Used

WIRING

Wrap electrical tape around each individual wire

connector (CC) down to the wire.

WARNING: Make sure no bare wire or wire

strands are visible after making connections.

Place green and white connections on opposite

side of box from the black and blue (if applicable)

connections.

Turn spliced/taped wires upward and gently push

wires and wire connectors (CC) into outlet box.

Locate four tabs inside canopy ring (B). Align tabs

in canopy ring (B) with four grooves at top of motor

assembly (C) and raise canopy (B) until you hear

tabs snap into grooves.

NOTE: Canopy ring (B) should fit flush to ceiling

when done correctly.

Remove motor assembly (C) from "J" hook and

slide top of motor assembly (C) over mounting plate

(A), aligning slotted holes in motor assembly (C)

with loosened mounting plate screws (J)/mounting

plate lock washers (I) in mounting plate (A). Twist

motor assembly (C) to lock. Re-insert the other two

mounting plate screws (J)/mounting plate lock

washers (I) previously removed (Step 5, page 8) to

secure motor assembly (C). Tighten all mounting

plate screws (J) securely.

Tab

FINAL INSTALLATION

Grooves

Tab

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Harbor Breeze Lüfter Handbücher

Harbor Breeze

Harbor Breeze LAKE PLACIDO CPK1261 Bedienungsanleitung

Harbor Breeze

Harbor Breeze TG52BNK3D1RC Bedienungsanleitung

Harbor Breeze

Harbor Breeze COGDELL COG60BNK7LR Bedienungsanleitung

Harbor Breeze

Harbor Breeze Cape Coast E-YLM52WW5C1 Bedienungsanleitung

Harbor Breeze

Harbor Breeze CALERA 00830 Bedienungsanleitung

Harbor Breeze

Harbor Breeze E-WCK44ABZ5LKS Bedienungsanleitung

Harbor Breeze

Harbor Breeze C-TR56BNK3D1R Bedienungsanleitung

Harbor Breeze

Harbor Breeze BTH44ABZC5C Bedienungsanleitung

Harbor Breeze

Harbor Breeze FLANAGAN Bedienungsanleitung

Harbor Breeze

Harbor Breeze ARMITAGE CC52WW5C1 Bedienungsanleitung

Harbor Breeze

Harbor Breeze HTE21091 Bedienungsanleitung

Harbor Breeze

Harbor Breeze AFTONSHIRE Bedienungsanleitung

Harbor Breeze

Harbor Breeze ECHOLAKE 00876 Bedienungsanleitung

Harbor Breeze

Harbor Breeze CUMBERLAND 42476 Bedienungsanleitung

Harbor Breeze

Harbor Breeze LP8072LAZ Bedienungsanleitung

Harbor Breeze

Harbor Breeze FW60AGV3LR Bedienungsanleitung

Harbor Breeze

Harbor Breeze EUK60MBK10LR Bedienungsanleitung

Harbor Breeze

Harbor Breeze BRADBURY BRD48BNK6LR Bedienungsanleitung

Harbor Breeze

Harbor Breeze MAZON MZ44BNK3LR Bedienungsanleitung

Harbor Breeze

Harbor Breeze PLM52CB5D Bedienungsanleitung

Harbor Breeze

Harbor Breeze Bath Ventilator with Light Bedienungsanleitung

Harbor Breeze

Harbor Breeze HTD21011 Bedienungsanleitung

Harbor Breeze

Harbor Breeze CLASSIC STYLE 00819 Bedienungsanleitung

Harbor Breeze

Harbor Breeze 40093 Bedienungsanleitung

Beliebte Lüfter Handbücher anderer Marken

ELTA FANS

ELTA FANS H03VV-F Bedienungsanleitung

Hunter

Hunter 20714 Gebrauchsanweisung

Emerson

Emerson CARRERA VERANDA CF542ORB00 Bedienungsanleitung

Hunter

Hunter Caraway Gebrauchsanweisung

Panasonic

Panasonic FV-15NLFS1 Bedienungsanleitung

Kompernass

Kompernass KH 1150 Bedienungsanleitung

VES

VES FALA100/12V/TR Bedienungsanleitung

Vertiv

Vertiv Liebert DCD Bedienungsanleitung

Westinghouse

Westinghouse GFP Series Bedienungsanleitung

Venmar

Venmar KUBIX HRV PLUS Series Bedienungsanleitung

Maico

Maico ECR 31 Bedienungsanleitung

Sonnenkonig

Sonnenkonig Dinky Bedienungsanleitung

S&P

S&P ECOWATT HXBR Bedienungsanleitung

Wider

Wider IMP03369BH Bedienungsanleitung

Panasonic

Panasonic F-60DHN Bedienungsanleitung

Broan

Broan 766BN Bedienungsanleitung

Premium

Premium PFS16022 Montageanleitung

Litex Industries

Litex Industries E-CGL52CB5C1 Bedienungsanleitung