HBM FS63 series Bedienungsanleitung
Installation Guide
English
FS63
Embedded Temperature Sensor
Hottinger Baldwin Messtechnik GmbH
Im Tiefen See 45
D-64239 Darmstadt
Tel. +49 6151 803-0
Fax +49 6151 803-9100
www.hbm.com
HBM FiberSensing, S.A.
Optical Business
Rua Vasconcelos Costa, 277
4470-640 Maia
Portugal
Tel. +351 229 613 010
Fax +351 229 613 020
www.hbm.com/fs
Mat.: 7-2002.4261
DVS: A4261-3.2 HBM: public
05.2015
Sensor Design Version: v1.0
EHottinger Baldwin Messtechnik GmbH.
Subject to modifications.
All product descriptions are for general information only.
They are not to be understood as a guarantee of quality or
durability.
FS63 A4261-3.2 HBM: public 3
English
1 Technical Details 4.........................................
1.1 General Information 4........................................
1.1.1 Overview 4.................................................
1.1.2 Characteristics 4.............................................
1.1.3 Applications 5...............................................
1.1.4 Quality 6...................................................
1.1.5 Accessories 6...............................................
1.2 General Specifications 7......................................
2 Sensor Installation 8........................................
2.1 List of Materials 8............................................
2.2 Preparing the Structure 8.....................................
2.3 Placing the Sensor 12.........................................
2.4 Concreting 15................................................
3 Sensor Configuration 17.....................................
3.1 Sensor Calibration Sheet 17....................................
3.1.1 General Information 18........................................
3.1.2 Calibration Data 18...........................................
3.1.3 Temperature Computation 18..................................
Technical Details
4A4261-3.2 HBM: public FS63
1 Technical Details
1.1 General Information
This installation guide applies to the following products:
Part Number Description
K-FS63-50-11-302 FS63 – Embedded Temperature Sensor • Outdoor • FC/APC
K-FS63-50-13-302 FS63 – Embedded Temperature Sensor • Outdoor • SC/APC
K-FS63-50-10-302 FS63 – Embedded Temperature Sensor • Outdoor • NC
1.1.1 Overview
The FS63 - Embedded Temperature Sensors are Fiber
Bragg Grating (FBG) based sensors, designed to be
directly cast into concrete wet mix.
1.1.2 Characteristics
: Robustness
Long-term reliability ensured by innovative sensor
design, careful selection of materials and IP68 packag
ing.
: Completely passive
Inherent immunity to all electromagnetic effects (EMI,
RFI, sparks, etc.) and safe operation in hazardous envi
ronments.
Technical Details
FS63 A4261-3.2 HBM: public 5
: High multiplexing capability
Connection of a large number of sensors to a single opti
cal fiber, reducing network and installation complexity.
: Remote sensing
Large distance between sensors and interrogator (sev
eral kilometers).
: Compatible with most interrogators
Provided with calibration sheet, allowing easy and accu
rate configuration.
: Self-referenced
Based on the measurement of an absolute parameter -
the Bragg wavelength - independent of power fluctua
tions.
1.1.3 Applications
HBM FiberSensing temperature sensors can be used in
several temperature measuring applications. They are
particularly suited for temperature mapping in large struc
tures (SHM).
: Industry
: Civil Engineering
: Energy
: R&D
Technical Details
6A4261-3.2 HBM: public FS63
1.1.4 Quality
All HBM FiberSensing's processes are strictly controlled
from development to production. Each product is sub
jected to high standard performance and endurance
tests, individually calibrated and checked before ship
ping.
HBM FiberSensing, S.A. concentrates all optical sensing
activity of HBM and is an ISO 9001:2008 certified com
pany.
1.1.5 Accessories
The implementation of complex sensing networks in large
structures is made simpler with HBM FiberSensing
accessories. These include cables especially designed to
resist harsh environments as in civil engineering, not only
during construction, but also during the lifetime of the
structure (humidity, corrosion, etc.).
For the installation of weldable temperature sensors in
severe environments, an optional metallic protection
cover is available.
Technical Details
FS63 A4261-3.2 HBM: public 7
1.2 General Specifications
Sensor
Sensitivity1) 10 pm/ºC
Measurement range -20 to 80 ºC
Resolution2) 0.1 ºC
Maximum calib. error 0.5 ºC
Optical
Central wavelength 1500 to 1600 nm
Spectral width (FWHM) < 0.2 nm
Reflectivity > 65%
Side lobe suppression > 10 dB
Inputs / Outputs
Cable type Ø 3 mm outdoor (armor)
Cable length 2 m each side (±5 cm)
Connectors FC/APC
SC/APC
NC (No Connectors)
Environmental
Operation temperature -20 to 80 ºC
Protection class IP68
Mechanical
Materials Stainless steel
Dimensions 100 x Ø 10 mm
Weight 55 g
1) Typical values
2) For 1 pm resolution in wavelength measurement
Sensor Installation
8A4261-3.2 HBM: public FS63
2 Sensor Installation
2.1 List of Materials
Included Material
Embedded Temperature Sensor
List of Needed Material
Clumps Plastic wire clumps
Tube Flexible and resistant protection tube
Box Protection box to be embedded (optional)
Labels Colored tape/ shrinking tube/ …
Protection Silicone or foam
2.2 Preparing the Structure
The embedded temperature sensor is a sensor prepared
to be embedded in concrete. Its design includes
ruggedized cables that resist such an environment.
Nevertheless, whenever possible, further protection of
cables should be performed on the cables path.
Prepare the sensor cables path with an appropriate, flexi
ble and resistant tube.
Sensor Installation
FS63 A4261-3.2 HBM: public 9
Fig. 2.1
Fig. 2.2
Depending on the control on the construction site, HBM
FiberSensing suggests two different solutions regarding
the access to the sensor connections:
If the stripping of the concrete can be closely controlled,
the protection tube can pass directly through a hole in the
formwork (Fig. 2.3 and Fig. 2.4). Later, when the form
work is removed, a box can be placed over the exit of the
Sensor Installation
10 A4261-3.2 HBM: public FS63
cables so that connections can be conveniently pro
tected.
Fig. 2.3
Fig. 2.4
If the stripping cannot be controlled, it is advisable to use
embedded protection boxes. Fix the box to the formwork
with screws that can be later on removed before the
stripping.
Andere Handbücher für FS63 series
1
Dieses Handbuch passt für folgende Modelle
3
Inhaltsverzeichnis
Andere HBM Zubehör Handbücher
HBM
HBM we2111 Bedienungsanleitung
HBM
HBM FIT 5A Bedienungsanleitung
HBM
HBM precix 6 PW6C Series Bedienungsanleitung
HBM
HBM PW29 Series Bedienungsanleitung
HBM
HBM PW22 Bedienungsanleitung
HBM
HBM T40B Bedienungsanleitung
HBM
HBM RTN Bedienungsanleitung
HBM
HBM PW29 Series Bedienungsanleitung
HBM
HBM WTX120 Bedienungsanleitung
HBM
HBM PW15PH Series Bedienungsanleitung
HBM
HBM U2A Bedienungsanleitung
HBM
HBM PW27AP Bedienungsanleitung
HBM
HBM RTN/M2 Series Bedienungsanleitung
HBM
HBM PACEline CLP Series Bedienungsanleitung
HBM
HBM HLC Series Bedienungsanleitung
HBM
HBM T10FM Bedienungsanleitung
HBM
HBM PW25 Bedienungsanleitung
HBM
HBM RSCC Series Bedienungsanleitung
HBM
HBM WE2107 Bedienungsanleitung
HBM
HBM PW25 Bedienungsanleitung
