HBM QuantumX CX22B-W Bedienungsanleitung
Operating Manual | Bedienungsanleitung
English Deutsch
CX22B / CX22B-W
Data Recorder - Datenrekorder
Hottinger Baldwin Messtechnik GmbH
Im Tiefen See 45
D-64239 Darmstadt
Tel. +49 6151 803-0
Fax +49 6151 803-9100
www.hbm.com
Mat.: 7-2001.3169
DVS: A3169-8.0 HBM: public
08.2017
EHottinger Baldwin Messtechnik GmbH.
Subject to modifications.
All product descriptions are for general information only.
They are not to be understood as a guarantee of quality or
durability.
Änderungen vorbehalten.
Alle Angaben beschreiben unsere Produkte in allgemeiner
Form. Sie stellen keine Beschaffenheits- oder Haltbarkeits
garantie dar.
Operating Manual | Bedienungsanleitung
English Deutsch
CX22B / CX22B-W
Data Recorder
2A3169-8.0 HBM: public CX22B / CX22B-W
English
1 Safety instructions 4........................................
2 Markings used 10............................................
2.1 The markings used in this document 10..........................
2.2 Symbols on the module and their meaning 11....................
3 Introduction 13..............................................
4 Connections and displays 15.................................
4.1 Voltage supply 17.............................................
4.2 Ground connection and grounding 18............................
4.3 Connection of QuantumX modules 18...........................
4.4 Communication with the Data Recorder 19.......................
4.5 Connector strip for backplane integration 20......................
4.6 USB 2.0 and USB 3.0 interfaces 20.............................
4.7 RS232 interface 20...........................................
4.8 Digital inputs and outputs 21...................................
4.9 START/STOP button 21.......................................
4.10 LED displays 22..............................................
5 Connecting QuantumX modules 27...........................
6 Operating the Data Recorder 30..............................
6.1 Operation with monitor and keyboard/mouse 30...................
6.2 Operation via a PC 31.........................................
6.2.1 A direct Ethernet line between PC and Data Recorder 33..........
6.2.2 Connection via a network 39...................................
6.2.3 Connection via WLAN 40......................................
6.2.4 Connection via a tablet 42.....................................
6.3 Connection via remote desktop 43..............................
6.4 Detecting and resolving connection problems 48..................
6.5 Using Ethernet and WLAN in parallel 49.........................
CX22B / CX22B-W A3169-8.0 HBM: public 3
7 The CX22B‒W Data Recorder start screen 51..................
8 The first DAQ job with catman[EASY 53......................
8.1 Creating a DAQ job 53........................................
8.2 Transferring data/files to the PC 58..............................
8.3 Data analysis 60..............................................
8.4 Monitoring functionality 61.....................................
9 Configuring the CX22B‒W for self-contained measurements 63.
10 Saving data on the Data Recorder 66..........................
10.1 Memory partitioning 66........................................
10.2 Removing and inserting the CFast memory card 68...............
10.3 Memory performance 69.......................................
10.4 EWF, safeguarding your settings against change 70...............
11 Operating the CX22B/CX22B-W as gateway 71.................
11.1 Description 71................................................
11.2 Activate/deactivate gateway mode 71...........................
11.3 Connect to a QuantumX module behind a CX22B-W 72............
11.4 Performances 74.............................................
12 System settings, update and recovery 75......................
12.1 Installing drivers 75...........................................
12.2 Changing system settings (Settings) 76..........................
12.3 Updating the software 77......................................
12.4 System restoration (Recovery) 78...............................
12.5 Potential sources of error and remedial action 78..................
13 FCC (USA) and CI (Canada) statement 80......................
14 Waste disposal and environmental protection 82..............
15 Index 83....................................................
Safety instructions
4A3169-8.0 HBM: public CX22B / CX22B-W
1 Safety instructions
Appropriate use
The QuantumX Data Recorder is to be used exclusively
for measurement tasks and directly related control tasks
within the application limits detailed in the specifications.
Use for any purpose other than the above is deemed to
be non-designated use.
In the interests of safety, the module should only be oper
ated as described in the Operating Manuals. It is also es
sential to comply with the legal and safety requirements for
the application concerned during use. The same applies to
the use of accessories.
Each time you start up the module, you must first run a
project planning and risk analysis that takes into account
all the safety aspects of automation technology. This par
ticularly concerns personal and machine protection.
Additional safety precautions must be taken in plants
where malfunctions could cause major damage, loss of
data or even personal injury. In the event of a fault, these
precautions establish safe operating conditions.
This can be done, forexample, by mechanical
interlocking, error signaling, etc.
Safety instructions
CX22B / CX22B-W A3169-8.0 HBM: public 5
Notice
The module must not be connected directly to the power
supply system. Supply voltage DC 10 V … 30 V.
When modules are installed in a vehicle, we recommend
connection to a separate battery or integration of an unin
terruptible power supply (UPS), as battery voltage is par
ticularly likely to fall below 10 V when a combustion en
gine starts up, which would automatically cause the
modules to restart.
General dangers of failing to follow the safety
instructions
The QuantumX Data Recorder is state-of-the-art and fail
safe. The module may give rise to residual dangers if it is
inappropriately installed and operated by untrained
personnel.
Any person instructed to carry out installation, commis
sioning, maintenance or repair of the modules must have
read and understood the Operating Manuals and in par
ticular the technical safety instructions.
Conditions at the place of installation
SProtect the module from direct contact with water.
SProtect the module from dirt, moisture or weather con
ditions such as rain, snow, etc. The protection class
under the IP standard DIN EN60529 is IP20.
SPlease observe the permissible maximum ambient
temperatures stated in the specifications.
SMake sure that the side ventilation openings are not
covered.
Safety instructions
6A3169-8.0 HBM: public CX22B / CX22B-W
SThe permissible relative humidity at 31°C is 80% (non
condensing); linear reduction up to 50% at 40°C.
SDo not expose the device to direct sunlight.
SInstall the device so that it can be disconnected from
the mains at any time without difficulty.
SIt is safe to operate the module up to a height of
2000 m.
Maintenance and cleaning
The modules are maintenance-free.
SBefore cleaning, disconnect all connections.
SClean the housing with a soft, slightly damp (not wet!)
cloth. Never use solvent, as this could damage the
label or the housing.
SWhen cleaning, ensure that no liquid gets into the
module or connections.
Residual dangers
The scope of supply and performance of the QuantumX
system covers only a small area of measurement tech
nology. In addition, equipment planners, installers and
operators should plan, implement and respond to the
safety engineering considerations of measurement tech
nology in such a way as to minimize residual dangers.
On-site regulations must be complied with at all times.
Product liability
In the following cases, the protection provided for the de
vice may be adversely affected. Liability for device func
tionality then passes to the operator:
SThe device is not used in accordance with the operat
ing manual.
Safety instructions
CX22B / CX22B-W A3169-8.0 HBM: public 7
SThe device is used outside the field of application
described in this chapter.
SThe operator makes unauthorized changes to the de
vice.
Working safely
A device must not be directly connected to the power
supply system. Supply voltage DC 10 V … 30 V.
The supply connection and all other connections must be
installed in such a way that electromagnetic interference
does not adversely affect device functionality (HBM rec
ommendation: "Greenline shielding design", download
able from the Internet at http://www.hbm.com/greenline).
Automation equipment and modules must be designed in
such a way that adequate protection or locking against
unintentional actuation is provided (e.g. access checks,
password protection, etc.).
When the modules are working in a network, these net
works must be designed in such a way that malfunctions
in individual nodes can be detected and shut down.
Safety precautions must be taken both in terms of hard
ware and software, so that a line break or other interrup
tions to signal transmission, e.g. via the bus
interfaces, do not cause undefined states or loss of data
in the automation device.
Conversions and modifications
The module must not be modified from the design or
safety engineering point of view except with our express
agreement. Any modification shall exclude all liability on
our part for any resultant damage.
In particular, any repair or soldering work on
motherboards (exchanging components) is prohibited.
Safety instructions
8A3169-8.0 HBM: public CX22B / CX22B-W
When exchanging complete modules, use only original
parts from HBM.
The module is delivered from the factory with a fixed
hardware and software configuration. Changes can only
be made within the possibilities documented in the manu
als.
Qualified personnel
This device is only to be installed and used by quali
fied personnel strictly in accordance with the specifi
cations and with the safety rules and regulations
which follow.
Qualified personnel means persons entrusted with siting,
mounting, starting up and operating the product who
possess the appropriate qualifications for their function.
This includes people who meet at least one of the three
following requirements:
SKnowledge of the safety concepts of automation tech
nology is essential and as project personnel, they
must be familiar with these concepts.
SAs automation plant operating personnel, they have
been instructed how to handle the machinery. They
are familiar with the operation of the modules and
technologies described in this documentation.
SAs system startup engineers or service engineers,
they have successfully completed the training to qual
ify them to repair the automation systems. They are
also authorized to activate, ground and label
circuits and equipment in accordance with safety
engineering standards.
It is also essential to comply with the legal and safety
requirements for the application concerned during use.
The same also applies to the use of accessories.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Sprachen:
Andere HBM Andere Handbücher
