HIK VISION DS-D42AM2 Bedienungsanleitung
Multi-Functional Card User Manual
i
Multi-Functional Card
User Manual
Multi-Functional Card User Manual
i
User Manual
COPYRIGHT © 2019 Hangzhou Hikvision Digital Technology Co., Ltd.
ALL RIGHTS RESERVED.
Any and all information, including, among others, wordings, pictures, graphs are the properties of
Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinafter referred to be
“Hikvision”). This user manual (hereinafter referred to be “the Manual”) cannot be reproduced,
changed, translated, or distributed, partially or wholly, by any means, without the prior written
permission of Hikvision. Unless otherwise stipulated, Hikvision does not make any warranties,
guarantees or representations, express or implied, regarding to the Manual.
About this Manual
The Manual includes instructions for using and managing the product. Pictures, charts, images and
all other information hereinafter are for description and explanation only. The information
contained in the Manual is subject to change, without notice, due to firmware updates or other
reasons. Please find the latest version in the company website
(http://overseas.hikvision.com/en/).
Please use this user manual under the guidance of professionals.
Trademarks Acknowledgement
and other Hikvision’s trademarks and logos are the properties of Hikvision in
various jurisdictions. Other trademarks and logos mentioned below are the properties of their
respective owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH ITS
HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND ERRORS,
AND HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,
MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND
NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL HIKVISION, ITS DIRECTORS, OFFICERS,
EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR
INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS,
BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE
USE OF THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY
AT YOUR OWN RISKS. HIKVISION SHALL NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL
OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER
ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL
PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR
JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS
THE APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS
USED WITH ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER
PREVAILS.
Multi-Functional Card User Manual
ii
Regulatory Information
FCC Information
Please take attention that changes or modification not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
FCC compliance: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the interference at
his own expense.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause
undesired operation.
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked with "CE" and
comply therefore with the applicable harmonized European standards listed under the
EMC Directive 2014/30/EU, the LVD Directive 2014/35/EU, the RoHS Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of
as unsorted municipal waste in the European Union. For proper recycling, return this
product to your local supplier upon the purchase of equivalent new equipment, or
dispose of it at designated collection points. For more information see: www.recyclethis.info
2006/66/EC (battery directive): This product contains a battery that cannot be disposed
of as unsorted municipal waste in the European Union. See the product documentation
for specific battery information. The battery is marked with this symbol, which may
include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return
the battery to your supplier or to a designated collection point. For more information see:
www.recyclethis.info
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.
Multi-Functional Card User Manual
iii
Applicable Models
This manual is applicable to the multi-functional card 2.0.
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol
Description
Provides additional information to emphasize or supplement
important points of the main text.
Indicates a potentially hazardous situation, which if not avoided,
could result in equipment damage, data loss, performance
degradation, or unexpected results.
Indicates a hazard with a high level of risk, which if not avoided, will
result in death or serious injury.
Multi-Functional Card User Manual
1
Chapter 1 Introduction
1.1 Overview
As an accessory of the LED sending card, the second generation multi-functional card is designed
to implement functions such as remote screen adjustment, 3D display, voltage detection,
temperature detection, and light sensing.
You need to upgrade both the receiving card and the sending card first, to enable 3D function of
the multifunctional card. Refer to the user manual of LED display for details.
1.2 Physical Interface
1.2.1 Front Panel
The appearance and description of the front panel are shown as below.
Figure 1-1 Front Panel
Table 1-1 Front Panel Description
Name
Description
Name
Description
12V GND
Sensor interface
RS232
Serial interface for
remote
telecommunication
3.3V GND（SCL SDA）
Sensor interface
POWER
Power indicator
AI/DI GND
Sensor interface
ACTIVE
Indicator for normal
working status
RS485
Serial interface for
telecommunication
—
—
Multi-Functional Card User Manual
2
1.2.2 Rear Panel
The appearance and description of the rear panel are shown as below.
Figure 1-2 Rear Panel
Table 1-2 Rear Panel Description
Name
Description
Name
Description
IR IN
Infrared input interface,
requiring to connect with
an IR extension cable
DATA
Interface for connecting
with the receiving card
IR OUT
Infrared out interface
WLAN
Ethernet interface
3D OUT
3D interface
DC IN 12V
Power interface
Multi-Functional Card User Manual
3
Chapter 2 Hardware Connection
The multi-functional card can work properly after being serially connected with the sending card
and the receiving cards.
In order to power the multi-functional card, you are recommended to connect it to the last
receiving card, as shown in the following figure.
Receiving
Card
WLAN WLAN
Sending Card
WLAN
Receiving
Card
WLAN WLAN
Receiving
Card
WLAN WLAN
Receiving
Card
WLAN WLAN
Multi-
Functional Card
WLAN WLAN
Figure 2-1 Hardware Connection
If the multi-functional card is connected directly to the sending card, extra configuration on
the client is needed. Refer to the user manual of LED display for details.
Multi-Functional Card User Manual
4
Chapter 3 Common Operations
3.1 3D Display (Optional)
The multi-functional card supports 3D function, which is used to implement the display of 3D
videos.
When the 3D function enabled, the loading capacity will decline by half. You need to connect to
half of the original devices to prevent screen flickering.
Prerequisites
The multi-functional card is connected correctly. See Chapter 2 Hardware Connection for details.
Steps
Step 1 Connect the 3D accessory, such as glasses, to 3D OUT on the multi-functional card.
Step 2 Input signal source.
Step 3 Log in to the client.
Step 4 Select Screen Management > Advanced Operation > Input Capability.
Step 5 Enable 3D Video Processing.
Step 6 Click OK.
Figure 3-1 Enable 3D Display
Multi-Functional Card User Manual
5
3.2 Infrared Remote Control
The multi-functional card can work with a remote control to remotely control LED screens.
You can use the remote control by importing a configuration file.
The remote control implements functions such as signal source switching, brightness adjustment,
display on/off detection, scene switching, etc.
The remote control is available within 10 m and 45oangle away from the multi-functional card.
3.3 Extended Functions
The multi-functional card has 5 extended interfaces to implement functions such as voltage
detection, temperature detection, and smoke or light sensing.
Multi-Functional Card User Manual
6
Appendix A Description of the Remote Control
Power Signal Source
Brightness
Scene
Volume
Directional
Button
Return
Menu
Shortcut
Help ID
System Information
3D
Dehumidification
Auto Resolution
Inhaltsverzeichnis
Andere HIK VISION Netzwerk-Hardware Handbücher
HIK VISION
HIK VISION DS-7732NI-I4/16P Bedienungsanleitung
HIK VISION
HIK VISION DS-9616NI-I8 Bedienungsanleitung
HIK VISION
HIK VISION DS-7608NI-M2 Series Bedienungsanleitung
HIK VISION
HIK VISION DS-3WF03C Bedienungsanleitung
HIK VISION
HIK VISION NVR-100MH-D/W Series Bedienungsanleitung
HIK VISION
HIK VISION DS-96128NI-H16 Bedienungsanleitung
HIK VISION
HIK VISION DS-7600NXI-I/S Bedienungsanleitung
HIK VISION
HIK VISION DS-7100NI-Q1 Series Bedienungsanleitung
HIK VISION
HIK VISION DS-KH6320-TE1 Bedienungsanleitung
HIK VISION
HIK VISION HiLook NVR 104MH-D/4P Bedienungsanleitung
HIK VISION
HIK VISION DS-7600NXI-K1 Series Bedienungsanleitung
HIK VISION
HIK VISION DS-96128NI-I16 Bedienungsanleitung
HIK VISION
HIK VISION DS-7104NI-SL/W Benutzerhandbuch
HIK VISION
HIK VISION DS-7600NI-KI/W Series Bedienungsanleitung
HIK VISION
HIK VISION DS-9600NXI-I8/S Series Bedienungsanleitung
HIK VISION
HIK VISION DS-8600NI-8 Benutzerhandbuch
HIK VISION
HIK VISION DS-3WF02C-5N/O Bedienungsanleitung
HIK VISION
HIK VISION DS-96064NI-I16 Bedienungsanleitung
HIK VISION
HIK VISION NVST HNR Series Bedienungsanleitung
HIK VISION
HIK VISION HWN Series Bedienungsanleitung
Beliebte Netzwerk-Hardware Handbücher anderer Marken
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung
Yudor
Yudor YDS-16 Bedienungsanleitung
D-Link
D-Link ShareCenter DNS-320L Bedienungsanleitung
Samsung
Samsung ES1642dc Gebrauchsanweisung
Honeywell Home
Honeywell Home LTEM-PV Montageanleitung
