HIK VISION DS-2CD852 Series Bedienungsanleitung

User Manual of Network Camera

Version 1.0.0

Thank you for purchasing our product. If there is any question or request,

please do not feel hesitated to contact us.

This manual may contain several technical incorrect places or printing

errors, and the content is subject to change without notice. The updates will be

added to the new version of this manual. We will readily improve or update the

products or procedures described in the manual.

Safety Instruction

These instructions are intended to ensure that user can use the product correctly to avoid danger or property

loss.

The precaution measure is divided into “Warnings” and “Cautions”

Warnings: Serious injury or death may cause if any of the warnings is neglected.

Cautions: Injury or equipment damage may cause if any of the cautions is neglected.

Warnings Follow these safeguards to

prevent serious injury or death.

Cautions Follow these precautions to

prevent potential injury or material

damage.

Warnings

1. In the use of the product, you must be strict compliance with the electrical safety regulations of the

nation and region.

2. Input voltage should meet both the SELV(Safety Extra Low Voltage) and the Limited Power Source

with AC 24V or DC 12V according to the IEC60950－1 standard. Please refer to technical

specifications for more details.

3. Do not connect several devices to one power adapter as adapter overload may cause over-heat or

fire hazard.

4. Please make sure that the plug is firmly inserted into the power socket.

5. When the product is installed on wall or ceiling, the device shall be firmly fixed.

6. If smoke, odor or noise rise from the device, turn off the power at once and unplug the power cable,

and then please contact the service center.

7. If the product does not work properly, please contact your dealer or the nearest service center.

Never attempt to disassemble the camera yourself. (We shall not assume any responsibility for

problems caused by unauthorized repair or maintenance.)

Notice：

1. Make sure the power supply voltage is correct before using the camera.

2. Do not drop the camera or subject it to physical shock.

3. Do not touch CCD (Charge Coupled Device) modules with fingers. If cleaning is necessary, use

clean cloth with a bit of ethanol and wipe it gently. If the camera will not be used for an extended

period, please turn on the lens cap to protect the CCD from dirt.

4. Do not aim the camera at the sun or extra bright places. A blooming or smear may occur otherwise

(which is not a malfunction however), and affecting the endurance of CCD at the same time.

5. The CCD may be burned out by a laser beam, so when any laser equipment is on using, make

sure that the surface of CCD will not be exposed to the laser beam.

6. Do not place the camera in extremely hot, cold(the operating temperature shall be－10℃～＋

60℃), dusty or damp locations, and do not expose it to high electromagnetism radiation.

7. To avoid heat accumulation, good ventilation is required for operating environment.

8. Keep the camera away from liquid while on using.

9. While on a delivery, the camera shall be packed in its original packing, or packing of the same

texture.

10. Regular part replacement: a few parts (e.g. electrolytic capacitor) of the equipment shall be

replaced regularly according to their average enduring time. The average time varies because of

differences between operating environment and using history, so regular checking is

recommended for all the users. Please contact with your dealer for more details.

INDEX

CHAPTER 1 INTRODUCTION............................................................................................................................................................. 4

1.1 NETWORK CAMERA FUNCTIONS AND FEATURES............................................................................................................................... 4

CHAPTER2 INSTALLATION................................................................................................................................................................ 5

2.1 PANELS DESCRIPTION....................................................................................................................................................................... 5

2.1.1 Side Elevation of the Camera............................................................................................................................................. 5

2.1.2 Rear Panel Description........................................................................................................................................................ 7

2.2 PRODUCT INSTALLATION .................................................................................................................................................................. 9

2.2.1 Box camera Installation........................................................................................................................................................ 9

2.2.2 Dome camera Installation.................................................................................................................................................. 10

2.2.3 Topological graph of network camera...............................................................................................................................11

2.3 INSTALLATION OF CLIENT SOFTWARE 4000(V2.0)...........................................................................................................................11

2.4 DS-2CD852, DS-2CD752 SERIES CAMERA MENU ILLUSTRATE AND E-PTZ OPERATION......................................................... 13

2.4.1 752/852 series products e-ptz function....................................................................................................................... 13

2.4.2 752/852 series menu instruction................................................................................................................................... 13

2.4.3 762/862 series menu instruction................................................................................................................................... 21

CHAPTER3 PARAMETERS CONFIGURATION............................................................................................................................. 27

3.1 CONFIGURATION VIA WEB BROWSER.............................................................................................................................................. 27

3.2 CONFIGURATIONVIACLIENTSOFTWARE4000(2.0) ................................................................................................................................. 30

CHAPTER 4 WAN ACCESS............................................................................................................................................................... 36

4.1WAN ACCESS HAS A FIXED STATIC IPNETWORK CAMERA.............................................................................................................. 36

4.2WAN ACCESS WITHOUT A FIXED STATIC IPNETWORK CAMERA..................................................................................................... 37

CHAPTER 5 COMMON FAILURES AND MAINTAINANCE......................................................................................................... 39

APPENDIX1SADPINTRODUCTION......................................................................................................................................................... 40

APPENDIX2PORTMAP .......................................................................................................................................................................... 42

APPENDIX TECHNOLOGY SPECIFICATION................................................................................................................................44

Chapter 1 Introduction

Network camera is a kind of embedded digital surveillance product that combines the features of

both traditional analog camera and net DVS (Digital Video Server). Due to the embedded Linux

operation system and the latest Davinci hardware platform of TI, the system operates with high

scheduling efficiency. Furthermore, the firmware is burned in the flash, which makes the product small,

reliable and highly stable.

1.1 Network camera Functions and Features

DS-2CD852,DS-2CD862,DS-2CD752,DS-2CD762 series Network camera support standard

MPEG-4 video Encoding and Oggvorbis,G.711 Voice Encoding techniques.

DS-2CD852,DS-2CD752 series network camera support E-PTZ function.

DS-2CD852,DS-2CD862,DS-2CD752,DS-2CD762 series network camera possess of OSD Menu,

it can be display on screen by invoke 95th preview point on the client software or IE situation.

Network Function :support the TCP/IP protocols(TCP/IP,HTTP,DHCP,DNS,RTSP

RTCP,PPPoE,Furthermore,FTP,SMTP,NTP,SNMP addible),and IE browsing.

Heartbeat Function: The server can acquire real time operating performance of the network

camera through the heartbeat function.

Alarm Function: The product includes 1 channel of alarm signal input and 1 channel of alarm on/off

output, and supports motion detection, video missing, mask alarm and external alarm input.(Get

details in Specification)

Voice Talking:Support bidirectional voice talking and monomial voice broadcasting.

User Management: Support multilevel right management. The administrator can create up to 15

separate users with different right levels, which highly improves the system security.

DS-2CD852MF-E and DS-2CD752 series network camera support 12.5 frames per second

(UXGA),12.5frames per second (HD900P), 25frames per second in PAL

(4CIF,DCIF,2CIF,CIF,QCIF). And support 10frames per second (UXGA),15frames per second

(HD900P), 30frames per second (HD720P),30 frames per second in

NTSC(4CIF,DCIF,2CIF,CIF,QCIF). Note: UXGA(1600*1200),HD900(1600*912).

DS-2CD862MF-E and DS-2CD762 series support 25 frames per second(HD720P and VGA) and

12.5 frames per second(XVGA).Note:XVGA(1280*960),HD720(1280*720), VGA(640*480).

The product offers a 10M/100M self-adaptive Ethernet interface.

Support set the parameters, browse real time videos or check the camera performance through

software or IE, and get external alarming and store the compressed bit rate through network.

Support remote upgrades and maintenance.

RS-485 supports monomial transparent channel function so that clients on remote PC can control

the serial devices.

Chapter2 Installation

[NOTICE]

1. Please check if all the items on the package list have been included with your camera.

2. Read the following contents carefully before the installation.

3. Make sure that all the related equipment is power-off during the installation.

4. Check the power supply to prevent any damage caused by mismatching problems.

5. This product is not for any environment of high humidity or high temperature. Conditions of rain,

airlessness or frequent shaking are also prohibited.

6. If the product does not operate properly, please contact your dealer or the nearest service center.

Never attempt to disassemble the camera yourself. Users are responsible for any problem caused

by modification or repairing without authorization.

7. Power Supply, Lens and SD card are Optional.

2.1 Panels Description

2.1.1 Side Elevation of the Camera

Fig 2.1.1 Side Elevation of DS-2CD852 series camera

Fig 2.1.2 Side Elevation of DS-2CD862 series camera

Fig 2.1.3 Side Elevation of DS-2CD752、DS-2CD762 series camera

Fig 2.1.4 Side Elevation of DS-2CD752MF-FB(H)、DS-2CD762MF-FB(H) series camera

2.1.2 Rear Panel Description

Fig. 2.1.5 Rear Panel of DS-2CD852, DS-2CD862 series camera

1、Standard Ethernet (UTP) RJ45 (10M/100M self-adaptive).

2、1 channel voice talk input,3.5mm audio interface, 2.0～2.4Vp-p, 1kΩ.

3、1 channel voice talk output, 3.5mm audio interface, electric line level, 600Ω.

4、ANT, connect to Antenna. Open this port as necessary.

5、1 channel alarm output (1A 1B).

6、1 channel alarm input signal (IN,G).

7、RS-485 bus interface（T＋T-）

8、Video Output port.

9、SD card slot.

10、PWR power supply indicate LED.

11、AC24V and DC12V power supply port.

Fig. 2.1.6 Rear Panel of DS-2CD752 、DS-2CD762 series

Address& protocols dial switch, define for dial switch: , from 1 to 5 dial switch

function as follows:

Switch Function ON OFF

1 SHARP SOFT

2 AES AI

3 BLC OFF

4 FL ON

5 NAGC SAGC

Notices: There are invalid dial switches for DS-2CD752、DS-2CD762 series from 6 to 10;

2.2 Product Installation

2.2.1 Box camera Installation

Box camera can be fixed in both metope and ceiling. Customers can choose whichever way

according to their specific needs. Please follow the steps below:(Take fixing in ceiling as an example,

fixing in metope follows the same rule).Choose the fixing method and fix the camera bracket

accordingly. If it is metope, then you need to fix the expand bolt (note: the mounting hole of the expand

bolt should align with the bracket) before fixing the bracket. If the wall surface is wooden, the first step

can be ignored and you can use the self-tapping screw to directly fix the bracket. Please note that the

metope on which the camera is fixed should be able to bear at least three times the weight of the

bracket and the camera.

Fig2.2.1FixCeilingBracket Fig2.2.2FixCamera

Fig 2.2.3 Fix Lens

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere HIK VISION Sicherheitskamera Handbücher

HIK VISION

HIK VISION DS-2CD883F-E series Bedienungsanleitung

HIK VISION

HIK VISION HWI-T220H Bedienungsanleitung

HIK VISION

HIK VISION DS-2CE78U1T-IT1F Bedienungsanleitung

HIK VISION

HIK VISION DS-2CE56D0T-IRMMF Bedienungsanleitung

HIK VISION

HIK VISION 4 Inch High Speed Dome Bedienungsanleitung

HIK VISION

HIK VISION DS-2CV2026G0-IDW Bedienungsanleitung

HIK VISION

HIK VISION DS-2CD2012-I Bedienungsanleitung

HIK VISION

HIK VISION DS-2CD8253F-EI Bedienungsanleitung

HIK VISION

HIK VISION DE1A Series Bedienungsanleitung

HIK VISION

HIK VISION DS-2CD7253F-EIZ Bedienungsanleitung

HIK VISION

HIK VISION TVI-AC334-VD4Z Bedienungsanleitung

HIK VISION

HIK VISION TURBO HD H0T PIR Series Bedienungsanleitung

HIK VISION

HIK VISION DS-2CD883F-EW series Bedienungsanleitung

HIK VISION

HIK VISION DS-2CD2786G2-IZS.ProSeries Bedienungsanleitung

HIK VISION

HIK VISION DS-2CD5165G0-IZS Bedienungsanleitung

HIK VISION

HIK VISION DS-2CD2555FWD-I Bedienungs- und Wartungsanleitung

HIK VISION

HIK VISION DS-2AF1-7XY-B Bedienungsanleitung

HIK VISION

HIK VISION DS-2CD2463G0-IW Bedienungsanleitung

HIK VISION

HIK VISION DS-2CD2783G1-IZS Bedienungsanleitung

HIK VISION

HIK VISION DS-2CD883F-E series Bedienungsanleitung

HIK VISION

HIK VISION DS-2AF1-412 Bedienungsanleitung

HIK VISION

HIK VISION DS-2CC51A7P-VF Bedienungsanleitung

HIK VISION

HIK VISION DS-2CD2D21G0/M-D/NF Bedienungsanleitung

HIK VISION

HIK VISION TURBO HD 5 MP Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung