HIK VISION ECI-B14F2 Bedienungsanleitung

ECI-B14F2 • ECI-B14F4 • ECI-B14F6

Network Bullet Camera

Quick Start Guide

ECI-B14Fx Network Bullet Camera Quick Start Guide

QSG VE ECI-B14Fx 060118NA 2

Manual Illustrations and Features

Graphics (screen shots, product pictures, etc.) in this document are for

illustrative purposes only. Your actual product may differ in appearance.

Your product might not support all features discussed in this document.

Hikvision USA Inc., 18639 Railroad St., City of Industry, CA 91748, USA •

Hikvision Canada, 4848 rue Levy, Saint Laurent, Quebec, Canada, H4R 2P1

Telephone: +1-909-895-0400 • Toll Free in USA: +1-866-200-6690 • E-Mail:

sales.usa@hikvision.com • www.hikvision.com

Any and all information, including, among others, wordings, pictures, graphs

are the properties of Hangzhou Hikvision Digital Technology Co., Ltd. or its

subsidiaries (hereinafter referred to be “Hikvision”). This user manual

(hereinafter referred to be “the Manual”) cannot be reproduced, changed,

translated, or distributed, partially or wholly, by any means, without the

prior written permission of Hikvision. Unless otherwise stipulated, Hikvision

does not make any warranties, guarantees or representations, express or

implied, regarding to the Manual.

About this Manual

This manual may contain several technical incorrect places or printing errors,

and the content is subject to change without notice. The updates will be

added to the new version of this manual. We will readily improve or update

the products or procedures described in the manual.

Regulatory Information

FCC Information

Please take attention that changes or modification not expressly approved

by the party responsible for compliance could void the user’s authority to

operate the equipment.

FCC Compliance: This equipment has been tested and found to comply with

the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and,

if not installed and used in accordance with the instruction manual, may

cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference in

ECI-B14Fx Network Bullet Camera Quick Start Guide

QSG VE ECI-B14Fx 060118NA 3

which case the user will be required to correct the interference at his own

expense.

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is subject to

the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including

interference that may cause undesired operation.

EU Conformity Statement

This product and, if applicable, the supplied accessories too are

marked with “CE” and comply therefore with the applicable

harmonized European standards listed under the Low Voltage

Directive 2014/35/EU, the EMC Directive 2014/30/EU.

2012/19/EU (WEEE directive): Products marked with this symbol

cannot be disposed of as unsorted municipal waste in the

European Union. For proper recycling, return this product to your

local supplier upon the purchase of equivalent new equipment, or

dispose of it at designated collection points. For more information see:

www.recyclethis.info.

2006/66/EC (battery directive): This product contains a battery

that cannot be disposed of as unsorted municipal waste in the

European Union. See the product documentation for specific

battery information. The battery is marked with this symbol, which

may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg).

For proper recycling, return the battery to your supplier or to a designated

collection point. For more information see: www.recyclethis.info.

Industry Canada ICES-003 Compliance

This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.

Warning

This is a class A product. In a domestic environment this product may cause

radio interference in which case the user may be required to take adequate

measures.

ECI-B14Fx Network Bullet Camera Quick Start Guide

QSG VE ECI-B14Fx 060118NA 4

Safety Instruction

These instructions are intended to ensure that user can use the product

correctly to avoid danger or property loss.

The precaution measure is divided into “Warnings” and “Cautions”.

Warnings: Serious injury or death may occur if any of the warnings are

neglected.

Cautions: Injury or equipment damage may occur if any of the cautions are

neglected.

Warnings

In the use of the device, you must be in strict compliance with the

electrical safety regulations of the nation and region.

Input voltage should meet both the SELV (Safety Extra Low Voltage) and

the Limited Power Source with 12 VDC according to the IEC60950-1

standard. Refer to technical specifications for detailed information.

The output current of the power adapter must be no more than 6A.

Do not connect multiple devices to one power adapter to avoid

over-heating or a fire hazard caused by overload.

Make sure that the plug is firmly connected to the power socket.

Make sure that the device is firmly fixed if wall mounting or ceiling

mounting is adopted.

If smoke, odor or noise rise from the device, turn off the power at once

and unplug the power cord, and then contact the service center.

Never attempt to disassemble the camera by unprofessional personal.

Warnings

Follow these

safeguards to

prevent

serious injury

or death.

Cautions Follow

these

precautions to

prevent

potential injury

or material

damage.

ECI-B14Fx Network Bullet Camera Quick Start Guide

QSG VE ECI-B14Fx 060118NA 5

Cautions

Do not drop the camera or subject it to physical shock.

Do not place the camera in extremely hot, cold (the operating

temperature shall be -40° to 60° C), dusty or damp locations, and do not

expose it to high electromagnetic radiation.

Do not touch senor modules with fingers.

If cleaning is necessary, use clean cloth with a bit of ethanol and wipe it

gently.

Do not aim the camera at the sun or extra bright places.

The sensor may be burned out by a laser beam, so when any laser

equipment is in using, make sure that the surface of sensor will not be

exposed to the laser beam.

Do not expose the device to high electromagnetic radiation or extremely

hot, cold, dusty or damp environment.

To avoid heat accumulation, good ventilation is required for the operating

environment.

Keep the camera away from liquid while in use for non-water-proof

device.

While in delivery, the camera shall be packed in its original packing, or

packing of the same texture.

Mark Description

Mark

Description

DC Voltage

ECI-B14Fx Network Bullet Camera Quick Start Guide

QSG VE ECI-B14Fx 060118NA 6

Contents

1 Appearance Description .........................................................................7

2 Installation.............................................................................................7

2.1 Ceiling/Wall Mounting.................................................................... 8

2.2 Ceiling/Wall Mounting with Junction Box .................................... 10

2.3 Waterproof Jacket Installation...................................................... 12

3 Set the Network Camera over the LAN..................................................13

3.1 Wiring ........................................................................................... 13

3.2 Activate the Camera ..................................................................... 14

3.2.1 Activation via Web Browser............................................... 14

3.2.2 Activation via SADP Software ............................................ 15

3.3 Modify the IP Address .................................................................. 16

3.4 Access via Web Browser ............................................................... 17

3.5 Operate via Hik-Connect App ....................................................... 18

3.5.3 Enable Hik-Connect for Use with Cameras........................ 18

3.5.4 Enable Hik-Connect Service via SADP Software ................ 18

3.5.5 Enable Hik-Connect via a Web Browser ............................ 19

3.5.6 Add Camera to Hik-Connect .............................................. 20

ECI-B14Fx Network Bullet Camera Quick Start Guide

QSG VE ECI-B14Fx 060118NA 7

1Appearance Description

This network bullet camera appearance is shown as the figures below.

Network Bullet Camera Overview

No.

Description

Lens

Front Cover

Back Cover

Fix Ring

Power Cord

Network Cable

NOTE:

For power over Ethernet (PoE), the power is passed along with data on

Ethernet cabling. A switch that supports the PoE function is required.

2Installation

Before You Start:

Make sure the device in the package is in good condition and all the

assembly parts are included.

The standard power supply is 12 VDC, make sure your power supply

matches your camera.

Make sure all related equipment is powered off during the installation.

Check the product specification for the installation environment.

Make sure that the wall is strong enough to withstand four times the

weight of the camera and the bracket.

Make sure that there are no reflective surfaces too close to the camera

lens. The IR light from the camera may reflect back into the lens causing

reflection.

ECI-B14Fx Network Bullet Camera Quick Start Guide

QSG VE ECI-B14Fx 060118NA 8

2.1 Ceiling/Wall Mounting

Before You Start

Both wall mounting and ceiling mounting are suitable for the bullet camera.

Ceiling mounting will be taken as an example in this section. Use these

ceiling mounting steps as a reference for wall mounting.

1. Paste the drill template (supplied) to the desired mounting position on

the ceiling/wall.

2. Drill the screw holes in the ceiling/wall according to the supplied drill

template.

Note:

Drill the cable hole if using the ceiling outlet to route the cable.

-Φ4 mm

Cable Hole

Side

Opening

Screw Hole

template

Φ55 mm

Φ68 mm

Φ18 mm

The Drill Template

3. Route the cables through the cable hole (optional) or the side opening.

4. Fix the camera on the ceiling/wall with supplied screws.

ECI-B14Fx Network Bullet Camera Quick Start Guide

QSG VE ECI-B14Fx 060118NA 9

Mount the Camera to the Ceiling/Wall

NOTES:

The supplied screw package contains both self-tapping screws and

expansion bolts.

If the ceiling is cement, expansion bolts are required to fix the camera. If

the ceiling is wood, self-tapping screws are required.

5. Connect the corresponding power cord, and network cable.

6. Power on the camera.

7. Set the network configuration (for details, refer to 3 Set the Network

Camera over the LAN and 4 Access via Web Browser) to check if the

image is at an optimum angle. If not, adjust the surveillance angle.

1) Loosen the no.1 adjusting screw to adjust the rotation position [0° to

360°].

2) Tighten the no.1 adjusting screw.

3) Loosen the no.2 adjusting screw to adjust the tilting position [-90° to

90°].

4) Tighten the no. 2 adjusting screw.

5) Loosen the no.3 fix ring to adjust the pan position [0° to 360°].

6) Tighten the no.3 fix ring.

ECI-B14Fx Network Bullet Camera Quick Start Guide

QSG VE ECI-B14Fx 060118NA 10

R: 0° to 360° T: -90° to 90°

P: 0° to 360°

3-Axis Adjustment

8. (Optional) Install the waterproof jacket. Refer to 2.3 Waterproof Jacket

for details.

2.2 Ceiling/Wall Mounting with Junction Box

Before You Start

Both wall mounting and ceiling mounting are suitable for the bullet

camera. Wall mounting will be taken as an example in this section. Use

these wall mounting steps as a reference for ceiling mounting.

You will need to purchase a junction box.

1. Paste the drill template (supplied) to the desired mounting position on

the wall/ceiling.

2. Drill the screw holes and the cable hole (optional) in the wall/ceiling

according to the drill template.

NOTE:

Drill the cable hole if using the ceiling outlet to route the cable.

Screw

Hole

Cable Hole

3 - Φ4 mm

Φ70 mm

Drill Template

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere HIK VISION Sicherheitskamera Handbücher

HIK VISION

HIK VISION DS-2XS6A25G0-I/CH20S40/K Betriebsanleitung

HIK VISION

HIK VISION DS-2DE5425IWG-4G Bedienungsanleitung

HIK VISION

HIK VISION DS-2XS6A87G1-LS/C36S80 Bedienungsanleitung

HIK VISION

HIK VISION HWT-B310-VF Bedienungsanleitung

HIK VISION

HIK VISION DS-2CE11D0T-PIRL Bedienungsanleitung

HIK VISION

HIK VISION DS-2CD2D21G0/M-D/NF Bedienungsanleitung

HIK VISION

HIK VISION DS-2DF1-401E Bedienungsanleitung

HIK VISION

HIK VISION DS-2SE4C425MWG-E/26(F0) Bedienungsanleitung

HIK VISION

HIK VISION DS-2CC178P(N)-A(-C) Bedienungsanleitung

HIK VISION

HIK VISION DS-2CD2T27G3E-L Bedienungsanleitung

HIK VISION

HIK VISION DS-2CE11D0T-PIRLO Bedienungsanleitung

HIK VISION

HIK VISION DS-2CD7126G0-IZS-B Bedienungsanleitung

HIK VISION

HIK VISION DS-2CD7133-E Bedienungsanleitung

HIK VISION

HIK VISION DS-2 Series Bedienungsanleitung

HIK VISION

HIK VISION DS-2CD854F-E series Bedienungsanleitung

HIK VISION

HIK VISION TURBO HD D3T Series Bedienungsanleitung

HIK VISION

HIK VISION DS-2XM6222FWD-I Bedienungsanleitung

HIK VISION

HIK VISION DS-2DE2A404IW-DE3/W S6 Bedienungsanleitung

HIK VISION

HIK VISION DS-2CD1043G0E-I Bedienungsanleitung

HIK VISION

HIK VISION IPC-B220-IZ Bedienungsanleitung

HIK VISION

HIK VISION 23 Series Bedienungsanleitung

HIK VISION

HIK VISION DS-2CE16H0T-ITPF Bedienungsanleitung

HIK VISION

HIK VISION DS-2CE16H0T-ITE Bedienungsanleitung

HIK VISION

HIK VISION DS-2CE17H0T-IT3F Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung