HIK VISION DS-PEA102S Bedienungsanleitung

Panic Alarm Station

User Manual

Panic Alarm StationUser Manual

User Manual

Any and all information, including, among others, wordings, pictures, graphs are the properties

of Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinafter referred to be

“Hikvision”). This user manual (hereinafter referred to be “the Manual”) cannot be reproduced,

changed, translated, or distributed, partially or wholly, by any means, without the prior written

permission of Hikvision. Unless otherwise stipulated, Hikvision does not make any warranties,

guarantees or representations, express or implied, regarding to the Manual.

About this Manual

This Manual is applicable to panic alarm station.

The Manual includes instructions for using and managing the product. Pictures, charts, images

and all other information hereinafter are for description and explanation only. The information

contained in the Manual is subject to change, without notice, due to firmware updates or other

reasons. Please find the latest version in the company website

(http://overseas.hikvision.com/en/).

Please use this user manual under the guidance of professionals.

Trademarks Acknowledgement

and other Hikvision’s trademarks and logos are the properties of Hikvision in

various jurisdictions. Other trademarks and logos mentioned below are the properties of their

respective owners.

Legal Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH

ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND

ERRORS, AND HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT

LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR

PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL HIKVISION, ITS

DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL,

CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS,

DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR

DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF HIKVISION HAS

BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE

WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL NOT TAKE ANY RESPONSIBILITES FOR

ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER

ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER,

HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.

SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR

JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS

THE APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS

USED WITH ILLEGITIMATE PURPOSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE

LATER PREVAILS.

Panic Alarm StationUser Manual

Regulatory Information

FCC Information

Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the

user’s authority to operate the equipment.

FCC Compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

—Consult the dealer or an experienced radio/TV technician for help

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause undesired operation.EU Conformity

Statement

This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the

applicable harmonized European standards listed under the EMC Directive 2014/30/EU, LVD Directive 2014/35/EU, the

RoHS Directive 2011/65/EU.

2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in

the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent

new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info

2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste

in the European Union. See the product documentation for specific battery information. The battery is marked with this

symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return

the battery to your supplier or to a designated collection point. For more information see: www.recyclethis.info

Industry Canada ICES-003 Compliance

This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.

Panic Alarm StationUser Manual

iii

Applicable Models

This manual is applicable to the models listed in the following table.

Product

Model

Panic Alarm Station

DS-PEA102S

DS-PEA102R

DS-PEA102Y

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Safety Instruction

The device should be used in compliance with local laws and electrical safety regulations. Refer to the

appropriate documentation for detailed information.

The input voltage should conform to IEC60950-1 standard: SELV (Safety Extra Low Voltage) and the

Limited Power Source (100～120/200～240 VAC). Refer to the appropriate documentation for

detailed information.

DO NOT connect multiple devices to one power adapter, to avoid over-heating or fire hazards caused

by overload.

Make sure the plug is properly connected to the power socket.

If smoke, odor, or noise arises from the device, immediately turn off the power, unplug the power

cable, and contact the service center.

Do not drop the device or subject it to physical shock.

Wipe the device gently with a clean cloth and a small quantity of ethanol, if necessary.

Do not aim the lens at the sun or any other bright light.

When any laser equipment is in use, make sure that the device lens is not exposed to the laser beam,

or it may burn out.

Symbol

Description

Provides additional information to emphasize or supplement

important points of the main text.

Indicates a potentially hazardous situation, which if not avoided,

could result in equipment damage, data loss, performance

degradation, or unexpected results.

Indicates a hazard with a high level of risk, which if not avoided, will

result in death or serious injury.

Panic Alarm StationUser Manual

Do not expose the device to high electromagnetic radiation or extremely hot, cold, dusty, or damp

environments, the appropriate temperature is -25℃ to 55℃.

Place the device in a dry and well-ventilated environment.

Keep non-waterproof devices away from liquids.

Keep the device in original or similar packaging while transporting it.

A few device components (e.g., electrolytic capacitor) require regular replacement. The average

lifespan varies, so periodic checking is recommended. Contact your dealer for details.

Improper use or replacement of the battery may result in explosion hazard. Replace with the same or

equivalent type only. Dispose of used batteries in conformance with the instructions provided by the

battery manufacturer.

Never attempt to disassemble the device.

Serial Port Accessing

While accessing with serial port, enter 'debug' and then the system will print a string. Enter the string in the

URL of http://psh.hikvision.com.cn:8080/sso/home/page to get the terminal control command. Insert

the command to access to the device serial port.

Panic Alarm StationUser Manual 
v 
 
 
Table of Content 
 
 
Chapter 1 Overview........................................................................................................................................................................7 
 Description....................................................................................................................................................................7 
 Key Features .................................................................................................................................................................7 
Chapter 2 Activating the Control Panel............................................................................................................................................8 
Chapter 3 Remote Settings ...........................................................................................................................................................18 
 Device Management.................................................................................................................................................... 18 
 Add Device to the Client Software .......................................................................................................................18 
 Edit Network Parameters ....................................................................................................................................19 
 Network Configuration ................................................................................................................................................20 
 Set General Network Parameters ........................................................................................................................20 
 Set DNS .............................................................................................................................................................. 21 
 Set NAT .............................................................................................................................................................. 22 
 Set SIP ................................................................................................................................................................ 24 
 Set Hik-Connect .................................................................................................................................................. 25 
 Access the Platform ............................................................................................................................................25 
 Set Alarm Center.................................................................................................................................................27 
 Alarm Settings............................................................................................................................................................. 28 
 Set Zone .............................................................................................................................................................28 
 Set Relay.............................................................................................................................................................31 
 Set Call Waiting................................................................................................................................................... 33 
 Set Voice Prompt ................................................................................................................................................33 
 Alarm Management.....................................................................................................................................................34 
 Manage Relay ..................................................................................................................................................... 34 
 Manage Audio Input/Output ...............................................................................................................................35 
 Video & Audio Settings ................................................................................................................................................ 36 
 Video & Audio Settings........................................................................................................................................36 
 Set Display..........................................................................................................................................................38 
 Set Intercom Audio .............................................................................................................................................40 
 System Settings ...........................................................................................................................................................41 
 Set Time .............................................................................................................................................................41 
 Set System Parameters .......................................................................................................................................41 
 Set Security......................................................................................................................................................... 42 
 Set Password ......................................................................................................................................................43 
 Set User..............................................................................................................................................................45 
 Search for Log.....................................................................................................................................................45 
 Maintain the System ...........................................................................................................................................46 
 View Device Information .....................................................................................................................................48 
 Check Status................................................................................................................................................................ 49 

Panic Alarm StationUser Manual

Check Zone Status............................................................................................................................................... 49

Check Relay Status .............................................................................................................................................. 49

Panic Alarm StationUser Manual

Overview

Description

DS-PEA102A series of panic alarm station supports two –way audio communication, and panic

alarm, which realize alarm aid in emergency.

The product is applied in school, hospital, metro, scenic area, prison, etc.

Key Features

Network adaptive and video and audio adaptive

G.711U, G726, AAC Audio compression standard

Built-in omnidirectional microphone

Supports two-way audio communication and configuration

Supports listening and broadcast

Multiple network protocols including TCP/IP and RTSP

Supports ISUP, Hik-Connect, Hik_SIP protocol

Protection level: IP54

Anti-Explosion level: IK08

Supports external siren and strobe light

Panic Alarm StationUser Manual

Activating the Control Panel

Purpose:

You are required to activate the control panel first before you can use the control panel.

Activation via SADP, and Activation via client software are supported.

Activation via SADP Software

SADP software is used for detecting the online device, activating the device, and resetting the password.

Get the SADP software from the supplied disk or the official website, and install the SADP according to the prompts. Follow the steps

to activate the control panel.

Steps:

1. Run the SADP software to search the online devices.

2. Check the device status from the device list, and select an inactive device.

3. Create a password and input the password in the password field, and confirm the password.

STRONG PASSWORD RECOMMENDED–We highly recommend you create a strong password of your own choosing (using

a minimum of 8 characters, including upper case letters, lower case letters, numbers, and special characters) in order to

increase the security of your product. And we recommend you reset your password regularly, especially in the high security

system, resetting the password monthly or weekly can better protect your product.

4. Click OK to save the password.

You can check whether the activation is completed on the popup window. If activation failed, please make sure that the

password meets the requirement and then try again.

5. Change the device IP address to the same subnet with your computer by either modifying the IP address manually or checking the

checkbox of Enable DHCP.

Panic Alarm StationUser Manual

6. Input the password and click the Modify button to activate your IP address modification.

Activation via Client Software

The client software is versatile video management software for multiple kinds of devices.

Get the client software from the supplied disk or the official website, and install the software according to the prompts. Follow the

steps to activate the control panel.

Steps:

1. Run the client software and the control panel of the software pops up, as shown in the figure below.

Andere Handbücher für DS-PEA102S

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere HIK VISION Sicherheitssystem Handbücher

HIK VISION

HIK VISION DS-PEA1-21 Bedienungsanleitung

HIK VISION

HIK VISION DS-1901I Administratorhandbuch

HIK VISION

HIK VISION AX PRO Bedienungsanleitung

HIK VISION

HIK VISION DS-19A Series Bedienungsanleitung

HIK VISION

HIK VISION AX PRO Series Installationsanleitung

HIK VISION

HIK VISION Blazer Express 16 Bedienungsanleitung

HIK VISION

HIK VISION NB V6 Bedienungsanleitung

HIK VISION

HIK VISION AX HYBRID PRO Bedienungsanleitung

HIK VISION

HIK VISION DS-PS1-I-WA Bedienungsanleitung

HIK VISION

HIK VISION DS-PEA22-F Bedienungsanleitung

HIK VISION

HIK VISION DS-PHA20-P Bedienungsanleitung

HIK VISION

HIK VISION DS-K2M060 Bedienungsanleitung

HIK VISION

HIK VISION DS-PEA12-P/ZJ Bedienungsanleitung

HIK VISION

HIK VISION AX PRO Bedienungsanleitung

HIK VISION

HIK VISION AX DS-PW32-H Series Bedienungsanleitung

HIK VISION

HIK VISION Pyronix Euro Mini Bedienungsanleitung

HIK VISION

HIK VISION DS-PS1-I-WB Bedienungsanleitung

HIK VISION

HIK VISION DS-PEA Series Bedienungsanleitung

HIK VISION

HIK VISION DS-9600NI-ST Series Bedienungsanleitung

HIK VISION

HIK VISION Pyronix Enforcer V10 Service-Handbuch

HIK VISION

HIK VISION ITS Gebrauchsanweisung

HIK VISION

HIK VISION DS-PD1-EB-WS2 Bedienungsanleitung

HIK VISION

HIK VISION DS-PK-LRT Bedienungsanleitung

HIK VISION

HIK VISION Blazer Express Station Bedienungsanleitung

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

CADDX

CADDX NX-6 Bedienungsanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

Blaupunkt

Blaupunkt SA 2700 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Highway Safety Group

Highway Safety Group EA401 Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung