Hioki 8826 Bedienungsanleitung

INSTRUCTION MANUAL

For...は専用機種。複数の場合は「,」で区切る。不要の場合はとる。

形名を入力。複数の場合は改行

8826

品名を入力。

MEMORY HiCORDER

8826 MEMORY HiCORDER INSTRUCTION MANUAL

HEAD OFFICE

81 Koizumi, Ueda, Nagano 386-1192, Japan

TEL +81-268-28-0562 / FAX +81-268-28-0568

E-mail: os-c[email protected]/ URL http://www.hioki.co.jp/

HIOKI USA CORPORATION

6 Corporate Drive, Cranbury, NJ 08512, USA

TEL +1-609-409-9109 / FAX +1-609-409-9108

8826A981-12 06-12H

Printed on recycled paper

1. 赤部分修正

2. 背表紙の厚さを設定する。（表裏両方）

3. 背表紙の厚さに合わせて形名・品名の幅を調整

する。

4. Acobat Distiller で、用紙に「12mm 超表紙」を選

択して PDF ファイルを作成する。

（モノクロにすることを忘れないように）

5. 作成した PDF ファイルを

「¥¥172.20.100.34¥表紙データ」にコピーす

る。

Contents

Introduction i

Inspection i

Safety Notes iii

Notes on Use v

Chapter Summary x

Chapter 1 Product Overview 1

1.1 Major Features 2

1.2 Names and Function of Parts 4

Chapter 2 Installation and Preparation 9

2.1 Installation of the Unit 9

2.2 Power Supply and Ground Connection 11

2.3 Power On/Off 13

2.4 Connection of the Input Unit 14

2.4.1 8936 ANALOG UNIT / 8938 FFT ANALOG UNIT 14

2.4.2 8937 VOLTAGE/TEMP UNIT 15

2.4.3 8939 STRAIN UNIT 16

2.4.4 8940 F/V UNIT 17

2.4.5 8947 CHARGE UNIT 20

2.5 Logic Probe Connection 22

2.6 9018-10, 9132-10 CLAMP ON PROBE Connection 23

2.7 9322 DIFFERENTIAL PROBE Connection 23

2.8 Loading Recording Paper 24

2.9 Care of Recording Paper 26

2.10 Notes on Measurement 27

2.10.1 Maximum Input Voltage 30

2.10.2 Using a Voltage Transformer 31

Chapter 3 Basic Key Operation 33

3.1 Basic Key Operation 33

3.1.1 Basic Display Operation ( MENU ) 33

3.1.2 Printer Key Operation 34

3.1.3 Setting Items 34

3.1.4 JOG/SHUTTLE Control and Select Key 34

3.1.5 Basic Input Operation 35

3.2 Measurement Start and Stop 35

3.3 Other Keys Operation 36

3.4 Screen Configuration 37

3.5 Using the Key Lock Function 38

Chapter 4 Memory Recorder Function 39

4.1 Outline of the Memory Recorder Function 40

4.2 Operation Sequence (MEM) 42

4.3 STATUS Settings (MEM) 44

4.3.1 Setting the Function Mode 44

4.3.2 Setting the Time Axis Range 45

4.3.3 Setting the Recording Length 46

4.3.4 Setting the Format 48

4.3.5 Setting the Display Size 51

4.3.6 Setting the Interpolation (dot-line) 51

4.3.7 Setting the Print Mode 52

4.3.8 Setting the Roll Mode 54

4.3.9 Setting the Auto Print Function 55

4.3.10 Setting the Auto Save Function 56

4.3.11 Setting the Overlay Function 58

4.3.12 Setting the Averaging Function 59

4.3.13 Setting the Waveform Evaluation 61

4.4 Using the X-Y Waveform Plots (MEM) 62

4.5 Settings on the Display Screen (MEM) 65

4.6 Auto Range Function 66

4.7 Other Screen Settings (MEM) 67

4.8 Start and Stop Operation (MEM) 68

Chapter 5 Recorder Function 69

5.1 Outline of the Recorder Function 70

5.2 Operation Sequence (REC) 72

5.3 STATUS Settings (REC) 74

5.3.1 Setting the Function Mode 74

5.3.2 Setting the Time Axis Range 75

5.3.3 Setting the Sampling Period 76

5.3.4 Setting the Recording Length 77

5.3.5 Setting the Format 79

5.3.6 Setting the Display Size 81

5.3.7 Setting the Print Mode 82

5.3.8 Setting the Additional Recording Function 84

5.3.9 Setting the Printer Function (Real Time Printing) 86

5.3.10 Setting the Auto Save Function 87

5.3.11 Setting the Interpolation (dot-line, X-Y only) 89

5.3.12 Setting the Display Clear Function (X-Y only) 89

5.4 Using the X-Y CONT Recorder 90

5.5 Settings on the Display Screen (REC) 93

5.6 Start and Stop Operation (REC) 94

Chapter 6 RMS Recorder Function 95

6.1 Outline of the RMS Recorder Function 96

6.2 Operation Sequence (RMS) 98

6.3 STATUS Settings (RMS) 100

6.3.1 Setting the Function Mode 100

6.3.2 Setting the Time Axis Range 101

6.3.3 Setting the Frequency 101

6.3.4 Setting the Recording Length 102

6.3.5 Setting the Format 104

6.3.6 Setting the Display Size 106

6.3.7 Setting the Print Mode 107

6.3.8 Setting the Additional Recording Function 109

6.3.9 Setting the Printer Function (Real Time Printing) 111

6.3.10 Setting the Auto Save Function 112

6.4 Settings on the Display Screen (RMS) 114

6.5 Start and Stop Operation (RMS) 115

Chapter 7 Recorder & Memory Function 117

7.1 Outline of the Recorder & Memory Function 117

7.2 Operation Sequence (REC&MEM) 118

7.3 STATUS1 Settings (REC&MEM) 120

7.3.1 Setting the Function Mode 120

7.3.2 Setting the Time Axis Range 121

7.3.3 Setting the Recording Length 122

7.3.4 Setting the Display function 124

7.3.5 Setting the Display Size 125

7.3.6 Setting the Format 126

7.3.7 Setting the Print Mode 127

7.3.8 Setting the Additional Recording Function 129

7.3.9 Setting the Printer Function (Real Time Printing) 131

7.3.10 Setting the Auto Save Function 132

7.3.11 Setting the Real-Time Save 135

7.4 STATUS2 Settings (REC&MEM) 140

7.4.1 Using the Sequential Save Function 140

7.5 Settings on the Display Screen (REC&MEM) 141

7.6 Start and Stop Operation (REC&MEM) 142

Chapter 8 FFT Function 143

8.1 Outline of the FFT Function 143

8.2 Operation Sequence (FFT) 144

8.3 STATUS1 Settings (FFT) 146

8.3.1 Setting the Function Mode 146

8.3.2 Setting the FFT Channel Mode 147

8.3.3 Setting the Frequency Range 148

8.3.4 Setting the Sampling Point 149

8.3.5 Setting the Window Processing 150

8.3.6 Setting the Format 151

8.3.7 Selecting Reference Data 153

8.3.8 Setting the FFT Analysis Mode 154

8.3.9 Setting the Analysis Channel 154

8.3.10 Setting the X-axis and Y-axis Displays 155

8.3.11 Setting the Display Scale 157

8.3.12 Octave Filter Setting 159

8.4 STATUS2 Settings (FFT) 160

8.4.1 Setting the Averaging Function 160

8.4.2 Setting the Interpolation 165

8.4.3 Setting the Print Mode 166

8.4.4 Setting the Auto Print Function 167

8.4.5 Setting the Auto Save Function 168

8.4.6 Setting the Waveform Evaluation 170

8.5 Settings on the Display Screen (FFT) 171

8.6 Start and Stop Operation (FFT) 172

8.7 Analysis Function 173

8.7.1 Storage Waveform [STR] 173

8.7.2 Linear Spectrum [LIN] 174

8.7.3 RMS Spectrum [RMS] 176

8.7.4 Power Spectrum [PSP] 178

8.7.5 Auto Correlation [ACR] 180

8.7.6 Histogram [HIS] 181

8.7.7 Transfer Function [TRF] 182

8.7.8 Cross Power Spectrum [CSP] 184

8.7.9 Cross Correlation [CCR] 186

8.7.10 Unit Impulse Response [IMP] 187

8.7.11 Coherence [COH] 188

8.7.12 Octave Analysis [OCT] 190

Chapter 9 Input Channel Settings 193

9.1 Setting Items for Input Channel 193

9.2 Input Channel Setting Procedure 194

9.3 Setting the CHANNEL1 Screen 196

9.3.1 Setting the Waveform Display Color 197

9.3.2 Setting the Waveform Display Graph Position 198

9.3.3 Setting the Measurement Range 199

9.3.4 Setting the Input Coupling 200

9.3.5 Setting the Magnification/Compression Ratio Along the

Voltage Axis 201

9.3.6 Setting the Zero Position 202

9.3.7 Setting the Low-Pass Filter 204

9.3.8 Setting the Logic Inputs 205

9.4 Copying Channel Settings 207

9.5 Zero Setting 208

9.5.1 Zero Adjustment 208

9.5.2 Zero Offset 209

9.6 Setting the CHANNEL2 Screen 212

9.6.1 Setting the Variable Function 212

9.7 Scaling Function (SYSTEM2) 215

9.7.1 Setting the Scaling Function 216

9.7.2 Scaling Setting Example 220

9.8 Comment Function (SYSTEM 3) 221

9.8.1 Title Comment Input 221

9.8.2 Analog Channel Comment Input 222

9.8.3 Logic Channel Comment Input 224

9.8.4 Character Entry Procedure 226

9.9 Setting the Display Screen 228

9.9.1 Entering by CH.SET key 228

9.9.2 Vernier Function 229

9.9.3 Direct Channel Setting 230

9.10 Setting the 8937 VOLTAGE/TEMP UNIT 231

9.10.1 Making the Settings of Voltage Measurement 232

9.10.2 Making the Settings of Temperature Measurement 234

9.11 Setting the 8938 FFT ANALOG UNIT 237

9.12 Setting the 8939 STRAIN UNIT 238

9.13 Setting the 8940 F/V UNIT 240

9.13.1 Setting Frequency Mode 241

9.13.2 Setting the Count Mode 245

9.13.3 Setting the Pulse Duty Ratio Mode 247

9.13.4 Setting the Voltage Mode 249

9.13.5 Setting the Current Mode 251

9.14 Setting the 8947 CHARGE UNIT 253

9.14.1 Setting the Acceleration Measurement

(Charge/Preamp) 254

9.14.2 Setting the Sensor Sensitivity 257

9.14.3 Setting the Voltage Mode 259

Chapter 10 Trigger Functions 261

10.1 Outline of the Trigger Function 261

10.2 Operation Sequence ( Trigger mode setting ) 262

10.3 Trigger Screen Organization 264

10.4 Trigger Mode 265

10.5 Pre-trigger 266

10.6 Trigger Timing ( REC only ) 269

10.7 Trigger Source AND/OR Linking 270

10.8 Analog Trigger 271

10.8.1 Level Trigger ( MEM and REC only ) 272

10.8.2 Window-In, Window-Out Trigger 275

10.8.3 Voltage Drop Trigger ( MEM Only ) 277

10.8.4 Period Trigger 279

10.8.5 RMS Level Trigger 283

10.9 Logic Trigger 285

10.10 External Trigger Function 287

10.11 Timer Trigger Function 288

10.12 Manual Trigger 291

10.13 Trigger Output Terminal 291

Chapter 11 Display Screen Operation 293

11.1 Scrolling the Waveform 294

11.2 Using the A/B Cursors 295

11.2.1 Using the Line Cursors (Vertical) 296

11.2.2 Using the Line Cursors (Horizontal) 298

11.2.3 Using the Trace Cursors 300

11.2.4 Using the A/B Cursors (X-Y Screen) 302

11.3 TheMagnification/Compression Ratio Along the Time Axis 303

11.4 Zoom Function 304

11.5 Input Level Monitor Function 306

11.6 View Function (VIEW key) 307

Chapter 12 SYSTEM Screen Settings 311

12.1 Overview 311

12.2 SET UP Screen (SYSTEM 1) 312

12.2.1 Use Channel ( MEM only) 312

12.2.2 Start Backup 313

12.2.3 Back Light Saver 313

12.2.4 Display Color 313

12.2.5 Beep Sound 314

12.2.6 Language 314

12.2.7 Grid Type 315

12.2.8 Channel Marker 315

12.2.9 Time Value 315

12.2.10 List & Gauge 316

12.2.11 Printer Density 316

12.2.12 Upper-lower Print 316

12.2.13 0 Position Comment 316

12.2.14 Counter Print 317

12.3 SCALING Screen (SYSTEM 2) 318

12.4 COMMENT Screen (SYSTEM 3) 318

12.5 INTERFACE Screen (SYSTEM 4) 319

12.5.1 Output Destination by the COPY key 319

12.5.2 Output Destination by the PRINT key 320

12.5.3 Setting the Interface 321

12.5.4 Setting the SCSI ID and Target ID 322

12.5.5 Setting the MO Drive 322

12.5.6 Setting the LAN Interface 322

12.6 INITIALIZE Screen 328

12.6.1 TIME SET (Setting the Clock) 328

12.6.2 WAVE DATA CLEAR (DATA INITIALIZE) 329

12.6.3 SYSTEM RESET 329

12.6.4 System Information 329

12.7 SELF CHECK 330

12.7.1 ROM/RAM CHECK 330

12.7.2 PRINTER CHECK 330

12.7.3 DISPLAY CHECK 331

12.7.4 KEY CHECK 331

12.7.5 PC CARD CHECK 332

Chapter 13 Printout of Measurement Data 333

13.1 Printout of Measurement Data Operating Procedure 334

13.2 Setting the STATUS Screen (printout) 336

13.2.1 Setting the Format 336

13.2.2 Setting the Print Mode 337

13.3 Setting the CHANNEL Screen (printout) 339

13.3.1 Setting the Print Density 339

13.3.2 Setting the Waveform Display Graph Position 340

13.4 Setting the SYSTEM Screen (printout) 342

13.4.1 SET UP Screen (SYSTEM 1) 342

13.4.2 SCALING Screen 345

13.4.3 COMMENT Screen 345

13.4.4 INTERFACE Screen 346

13.5 Example of Printer Output 347

13.6 Printing Procedure 354

13.6.1 Manual Print 355

13.6.2 Auto Print 356

13.6.3 Real-Time Print 357

13.6.4 Partial Print 358

13.6.5 Screen Hard Copy 359

13.6.6 List Print 360

13.6.7 Report Print 360

13.7 External Printer (Color Print) 361

Chapter 14 Storing Measurement Data 363

14.1 Floppy Disk 364

14.2 MO Disk (Option) 365

Inhaltsverzeichnis

Andere Hioki Laborausrüstung Handbücher

Hioki

Hioki 2D THERMO HiTESTER Bedienungsanleitung

Beliebte Laborausrüstung Handbücher anderer Marken

Qiagen

Qiagen DML 3000 Bedienungsanleitung

Queensgate

Queensgate NANOSCAN OP400 Programmierhandbuch

Conviron

Conviron GEN1000-GE Bedienungsanleitung

Parr Instrument

Parr Instrument 4560 Bedienungsanleitung

IKA

IKA IC control Bedienungsanleitung

Integra

Integra DOSE IT Bedienungsanleitung

Agilent Technologies

Agilent Technologies 5800 ICP-OES Bedienungsanleitung

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Bedienungsanleitung

NI PXI-5422 Handbuch

Collomix

Collomix Aqix Bedienungsanleitung

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Bedienungsanleitung

Ocean Insight

Ocean Insight FLAME-NIR+ Bedienungsanleitung

Parker

Parker ALIGN-MG-NA Bedienungsanleitung

BD 644787 Bedienungsanleitung

DENTAURUM

DENTAURUM Compact Megaplus Bedienungsanleitung

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Bedienungsanleitung

VWR

VWR SAS Super IAQ Bedienungsanleitung

illumina

illumina MiSeqDx Bedienungsanleitung