Hioki 3662-20 Bedienungsanleitung

Printed on recycled paper Printed in Japan

Edited and published by Hioki E.E. Corporation

Technical Support Section

• All reasonable care has been taken in the production of this manual,

but if you find any points which are unclear or in error, please contact

your supplier or the International Sales and Marketing Department at

Hioki headquarters.

• In the interests of product development, the contents of this manual are

subject to revision without prior notice.

• The content of this manual is protected by copyright. No reproduction,

duplication or modification of the content is permitted without the

authorization of Hioki E.E. Corporation.

HEAD OFFICE

81 Koizumi, Ueda, Nagano 386-1192, Japan

TEL +81-268-28-0562 FAX +81-268-28-0568

E-mail: [email protected] URL http://www.hioki.com/

(International Sales and Marketing Department)

HIOKI USA CORPORATION

6 Corporate Drive, Cranbury, NJ 08512, USA

TEL +1-609-409-9109 FAX +1-609-409-9108

3663-20

LASER LIGHT SOURCE

3662-20

Instruction Manual

December 2009 Revised edition 5 3662A981-05 09-12H

Contents

Introduction ............................................................. 1

Inspection ............................................................... 1

Safety Notes ........................................................... 2

Usage Notes ........................................................... 4

Chapter 1 Overview 7

1.1 Product Overview ................................... 7

1.2 Features .................................................. 7

1.3 Parts Names and Functions ................... 8

Chapter 2 Measurement Procedures 11

2.1 Connecting Connectors ........................ 11

2.1.1 Connecting FC-Type Connector ....... 12

2.1.2 Connecting SC-Type Connector ......13

2.2 Turning ON/OFF Power ........................ 14

2.3 Output Modulation ................................15

Chapter 3 Specifications 17

3.1 Optical Output Specifications ................17

3.2 General Specifications ..........................18

Chapter 4 Maintenace and Service 19

4.1 Battery Replacement .............................19

4.2 Attaching/Detaching Connector Adapter ..21

4.3 Attaching the Strap ................................23

4.4 Cleaning ................................................24

4.4.1 Cleaning the Product .........................24

4.4.2 Cleaning Optical Output Terminal .....24

4.4.3 Cleaning Cable Connector ................26

4.5 Service ..................................................27

Chapter 5 Appendix 29

5.1 Options ..................................................29

Thank you for purchasing the HIOKI “3662-20,

3663-20 LASER LIGHT SOURCE”. To obtain max-

imum performance from the product, please read

this manual first, and keep it handy for future refer-

ence.

When you receive the product, inspect it carefully

to ensure that no damage occurred during ship-

ping. In particular, check the accessories, panel

switches, and connectors. If damage is evident, or

if it fails to operate according to the specifications,

contact your dealer or Hioki representative.

Accessories

Carrying case....................................................1

LR6 alkaline battery..........................................2

Strap .................................................................1

Instruction manual ............................................1

Before using the product

Before using the product the first time, verify that it

operates normally to ensure that the no damage

occurred during storage or shipping. If you find any

damage, contact your dealer or Hioki representa-

tive.

Introduction

Inspection

This manual contains information and warnings

essential for safe operation of the product and for

maintaining it in safe operating condition. Before

using the product, be sure to carefully read the fol-

lowing safety notes.

Safety Symbols

Safety Notes

This product is designed to conform to IEC

61010 Safety Standards, and has been thor-

oughly tested for safety prior to shipment.

However, mishandling during use could

result in injury or death, as well as damage to

the product. Be certain that you understand

the instructions and precautions in the man-

ual before use. We disclaim any responsibil-

ity for accidents or injuries not resulting

directly from product defects.

In the manual, the symbol indicates particu-

larly important information that the user should

read before using the product.

The symbol printed on the product indicates

that the user should refer to a corresponding topic

in the manual (marked with the symbol) before

using the relevant function.

Laser Safety Information

The following symbols in this manual indicate the

relative importance of cautions and warnings.

Other Symbols

The 3662-20 and 3663-20 LASER LIGHT

SOURCEs are both Class 1 laser products

conforming to IEC60825-1, EN60825-1.

CLASS 1 LASER PRODUCT

FDA (CDRH)

Indicates that incorrect operation presents an ex-

treme hazard that could result in serious injury or

death to the user.

Indicates that incorrect operation presents a sig-

nificant hazard that could result inserious injury or

death to the user.

Indicates that incorrect operation presents a pos-

sibility of injury to the user or damage to the prod-

uct.

Advisory items related to performance or correct

operation of the product.

Indicates the prohibited action

Indicates the reference

Follow these precautions to ensure safe operation

and to obtain the full benefits of the various func-

tions.

Usage Notes

A laser beam is output from the laser output

connector during operation. The laser beam

is invisible. To prevent eye damage, do not

look directly into the connector or look at it

through a magnifying glass while the power

is on.

• Do not store or use the product where it could

be exposed to direct sunlight, high temperature

or humidity, or condensation. Under such condi-

tions, the product may be damaged and insula-

tion may deteriorate so that it no longer meets

specifications.

• To avoid damage to the product, do not allow

the product to get wet, and do not use it when

your hands are wet.

• Do not use the product where it may be exposed

to corrosive or combustible gases. The product

may be damaged.

• To avoid damage to the product, protect it from

vibration or shock during transport and handling,

and be especially careful to avoid dropping.

• The mating portions of the laser output connec-

tor ferrule and of the connector adapter are

high-precision machined parts. Make sure that

these portions are free of dust or other foreign

matter when connecting them. In particular, the

optical output connector ferrule requires meticu-

lous care. If there is dust in the interface or a

scratch on the optical output connector ferrule,

the 3662-20/3663-20 may not satisfy perfor-

mance specifications.

Direct

sunlight

High temperature

High humidity

Dust

• After use, always turn OFF the power.

• Be sure to replace the cap to protect the device

from dust when the 3662-20/3663-20 is not in

use.

• The Battery replacement indicator appears when

battery voltage becomes low. Replace the batter-

ies as soon as possible.

• Use the specified battery (LR6 alkaline battery)

only. Other batteries (manganese batteries, for

example) run out more quickly than alkaline bat-

teries.

Handling Optical Fiber Cable

Follow the precautions below to prevent damage

to the optical fiber cables.

• Do not insert at an angle.

• Do not bend the cable at the neck of the con-

nector.

• Do not bend or twist.

• Do not pull forcefully.

• Do not allow cable to kink.

• Do not touch the end face (ferrule).

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Hioki Messgerät Handbücher

Hioki

Hioki FT3424 Bedienungsanleitung

Hioki

Hioki 8730-10 Bedienungsanleitung

Hioki

Hioki CM3286-01 Bedienungsanleitung

Hioki

Hioki IM3523A Bedienungsanleitung

Hioki

Hioki 3506-10 Stücklistenhandbuch

Hioki

Hioki PW3365-20 Bedienungsanleitung

Hioki

Hioki 3441 Bedienungsanleitung

Hioki

Hioki Super megohm SM7110 Bedienungsanleitung

Hioki

Hioki CT6500 Bedienungsanleitung

Hioki

Hioki PW8001-01 Bedienungsanleitung

Hioki

Hioki PW3365 Bedienungsanleitung

Hioki

Hioki 3280-1 OF Bedienungsanleitung

Hioki

Hioki CM4375 Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Hioki

Hioki Super megohm SM7110 Bedienungsanleitung

Hioki

Hioki 3273 Bedienungsanleitung

Hioki

Hioki MEMORY HiCORDER MR8870-20 Bedienungsanleitung

Hioki

Hioki 3551 Bedienungsanleitung

Hioki

Hioki PW3198 Bedienungsanleitung

Hioki

Hioki IM3533 Bedienungsanleitung

Hioki

Hioki 3390 Bedienungsanleitung

Hioki

Hioki 3246-60 Bedienungsanleitung

Hioki

Hioki 3157 Bedienungsanleitung

Hioki

Hioki PW3365 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung