Hirschmann RS20 series Bedienungsanleitung

Artisan Technology Group is your source for quality

new and certied-used/pre-owned equipment

• FAST SHIPPING AND

DELIVERY

• TENS OF THOUSANDS OF

IN-STOCK ITEMS

• EQUIPMENT DEMOS

• HUNDREDS OF

MANUFACTURERS

SUPPORTED

• LEASING/MONTHLY

RENTALS

• ITAR CERTIFIED

SECURE ASSET SOLUTIONS

SERVICE CENTER REPAIRS

Experienced engineers and technicians on staff

at our full-service, in-house repair center

WE BUY USED EQUIPMENT

Sell your excess, underutilized, and idle used equipment

We also offer credit for buy-backs and trade-ins

www.artisantg.com/WeBuyEquipment

REMOTE INSPECTION

Remotely inspect equipment before purchasing with

our interactive website at www.instraview.com

LOOKING FOR MORE INFORMATION?

Visit us on the web at www.artisantg.com for more

information on price quotations, drivers, technical

specications, manuals, and documentation

View

Instra

RS20/RS30

Release

2.0

03/06 Technical support

[email protected]

User Manual

Installation

Industrial ETHERNET Rail Switch

RS20/RS30 Family

RS20

LS DA

+24V(P1) 0V 0V

FAULT

+24V(P2)

Stand by

Aufkleber MAC-Adresse

IP-ADDRESS

LS DA

V.24

USB

Stand by

FAULT

RS20

LS DA

+24V(P1) 0V 0V

FAULT

+24V(P2)

Stand by

Aufkleber MAC-Adresse

IP-ADDRESS

LS DA

V.24

USB

Stand by

FAULT

RS20

0V 0V

FAULT

+24V

(P2)

Stand by

Aufkleber MAC-Adresse

IP-ADDRESS

V.24

USB

Stand by

FAULT

+24V

(P1)

RS20 with 8 ports

RS20 with 24 ports RS20 with 4 ports

RS30 with 10 ports

RS30

+24V(P1) 0V 0V

FAULT

+24V(P2)

Stand by

Aufkleber MAC-Adresse

IP-ADDRESS

V.24

USB

Stand by

FAULT

RS30

+24V(P1) 0V 0V

FAULT

+24V(P2)

Stand by

Aufkleber MAC-Adresse

IP-ADDRESS

V.24

USB

Stand by

FAULT

RS30 with 26 ports

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Thenamingofcopyrightedtrademarksinthismanual,evenwhennotspeciallyindicated,should

not be taken to mean that these names may be considered as free in the sense of the trademark

and tradename protection law and hence that they may be freely used by anyone.

Manualsandsoftwareare protectedbycopyright.All rightsreserved.Thecopying,reproduction,

translation, conversion into any electronic medium or machine scannable form is not permitted,

either in whole or in part. An exception is the preparation of a backup copy of the software for

your own use.

The performance features described here are binding only if they have been expressly

guaranteed in the contract. This publication has been created by Hirschmann Automation and

Control GmbH according to the best of our knowledge. Hirschmann reserves the right to change

the contents of this manual without prior notice. Hirschmann can give no guarantee in respect

of the correctness or accuracy of the details in this publication.

Hirschmann can accept no responsibility for damages, resulting from the use of the network

components or the associated operating software. In addition, we refer to the conditions of use

specified in the license contract.

Printed in Germany (20.3.06)

Hirschmann Automation and Control GmbH

Stuttgarter Straße 45-51

72654 Neckartenzlingen

Tel. +49 1805 141538 039 524-001-02-0306

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

RS20/RS30

Release

2.0

03/06 3

Content

Safety instructions 4

About this manual 8

Legend 8

1Device description 9

1.1 Description of the device variants 10

1.1.1 RS20/RS30 combination options 11

1.1.2 RS20-... number of ports and media 12

1.1.3 RS30-... number of ports and media 14

2Assembly and startup procedure 16

2.1 Device installation 16

2.1.1 Unpacking and checking 16

2.1.2 Filling out the labeling field 16

2.1.3 Adjusting the DIP switch settings 17

2.1.4 Connecting the terminal block for supply voltage and

signal contact 17

2.1.5 Fitting the device on the ISO/DIN rail, grounding 18

2.1.6 Fitting the terminal block, startup procedure 19

2.1.7 Connecting the data lines 19

2.2 Displays 21

2.3 Carrying out basic settings 22

2.4 Disassembling the device 24

3Technical data 25

General data 25

EMV and stability 26

Network size 27

Power consumption/power output 28

Scope of delivery 28

Order numbers/product name 28

Accessories 29

Based specifications and standards 29

Certifications 30

4Further support 31

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

4RS20/RS30

Release

2.0

03/06

Safety instructions

This manual contains instructions which must be observed to ensure your

own personal safety and to avoid damage to devices and machinery.

UCertified usage

Please observe the following: The device may only be employed for the

purposes described in the catalog and technical description, and only in

conjunction with external devices and components recommended or

approved by Hirschmann. The product can only be operated correctly

and safely if it is transported, stored, installed and assembled properly

and correctly. Furthermore, it must be operated and serviced carefully.

USupply voltage

The devices are designed for operation with a safety extra-low

voltage.Thus, they may only be connected to the supply voltage connec-

tions and to the signal contact with PELV circuits or alternatively SELV

circuits with the voltage restrictions in accordance with IEC/EN 60950.

The supply voltage is electrically isolated from the housing.

VUse only undamaged parts!

VRelevant for North America:

The subject unit is to be suppplied by a Class 2 power source comp-

lyingwiththerequirementsoftheNationalElectricalCode,table 11(b).

If power is redundant supplied (two individual power sources) the po-

wer sources together should comply with the requirements of the Na-

tional Electrical Code, table 11 (b).

VRelevant for North America:

Use 60/75°C or 75°C copper(CU)wire only.

VRelevant for North America

for devices certified for hazardous locations:

Power, input and output (I/O) wiring must be in accordance with Class

I, Division 2 wiring methods [Article 501-4(b) of the National Electrical

Code, NFPA 70] and in accordance with the authority having

jurisdiction.

UShielding ground

The shielding ground of the connectable twisted pairs lines is connected

to the front panel as a conductor.

VBeware of possible short circuits when connecting a cable section

with conductive shielding braiding.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

RS20/RS30

Release

2.0

03/06 5

UHousing

Only technicians authorized by Hirschmann are permitted to open the

housing.

The device is grounded via the separated ground screw. It is located on

the left under the front panel.

VMake sure that the electrical installation meets local or nationally ap-

plicable safety regulations.

VThe ventilation slits must not be covered to ensure free air circulation.

VThe distance to the ventilation slots of the housing has to be a mini-

mum of 10 cm.

VNever insert pointed objects (thin screwdrivers, wires, etc.) into the in-

side of the subrack! Failure to observe this point may result in injuries

caused by electric shocks.

VThe device has to be mounted in an upright position.

VIf installed in a living area or office environment, the device must be

operated exclusively in switch cabinets with fire protection characteri-

stics according to EN 60950.

UEnvironment

The device may only be operated in the listed maximum surrounding air

temperature range at the listed relative air humidity range (non-conden-

sing).

VThe installation location is to be selected so as to ensure compliance

with the climatic limits listed in the Technical Data.

VTo be used in a Pollution Degree listed in the Technical Data.

UQualification requirements for personnel

Qualified personnel as understood in this manual and the warning signs,

are persons who are familiar with the setup, assembly, startup, and ope-

ration of this product and are appropriately qualified for their job. This

includes, for example, those persons who have been:

Dtrained or directed or authorized to switch on and off, to ground and to

labelpower circuitsanddevices orsystems inaccordance withcurrent

safety engineering standards;

Dtrainedor directed in thecareand use of appropriate safetyequipment

in accordance with the current standards of safety engineering;

Dtrained in providing first aid.

UGeneral Safety Instructions

This device is electrically operated. Adhere strictly to the safety require-

ments relating to voltages applied to the device as described in the ope-

rating instructions!

Failure to observe the information given in the warnings could result in

serious injury and/or major damage.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

6RS20/RS30

Release

2.0

03/06

VOnly personnel that have received appropriate training should operate

this device or work in its immediate vicinity. The personnel must be ful-

ly familiar with all of the warnings and maintenance measures in these

operating instructions.

VCorrect transport, storage, and assembly as well as careful operation

and maintenance are essential in ensuring safe and reliable operation

of this device.

VOnly use umdamaged parts!

VThese products are only to be used in the manner indicated in this ver-

sion of the manual.

VAny work that may have to be performed on the electrical installation

should be performed by fully qualified technicians only.

Warning!

LED- or LASER components according to IEC 60825-1 (2001):

CLASS 1 LASER PRODUCT.

LIGHT EMITTING DIODE - CLASS 1 LED PRODUCT.

Warning

LED LIGHT

DO NOT STARE INTO THE BEAM OR VIEW DIRECTLY

WITH OPTICAL INSTRUMENTS (e.g. lens, microscope).

Failure to observe this warning within a distance of 100 mm

can endanger your eyes. Light is emitted from the optical connections or

from the ends of the optical fibers that are connected to them. Light Emit-

ting Diode CLASS 2M, Wave length 650 nm, Power <2 mW, according to

IEC/CEI 60825-1:2003-10.

UNational and international safety regulations

VMake sure that the electrical installation meets local or nationally ap-

plicable safety regulations.

UNote on the CE marking

The devices comply with the regulations contained in the following Euro-

pean directives:

89/336/EEC

Directive of the council for standardizing the regulations of member

states on electromagnetic compatibility (changed by RL 91/263/EEC, 92/

31/EEC and 93/68/EEC).

In accordance with the above-named EU directives, the EU conformity

declaration will be at the disposal of the relevant authorities at the follo-

wing address:

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

RS20/RS30

Release

2.0

03/06 7

Hirschmann Automation and Control GmbH

Stuttgarter Straße 45-51

D-72654 Neckartenzlingen

Germany

Phone ++49 7127 14 1480

The product can be used in living areas (living area, place of business,

small business) and in industrial areas.

DInterference immunity: EN 61000-6-2:2001

DEmitted interference: EN 55022:1998 + A1 2000 + A2 2003, Class A

Warning!

This is a class A device. This device can cause interference in living

areas, and in this case the operator may be required to take appropriate

measures.

The assembly guidelines provided in these instructions must be strictly

adhered to in order to observe the EMC value limits.

UFCC note:

Appropriate testing has established that this device fulfills the require-

ments of a class A digital device in line with part 15 of the FCC regulati-

ons.

These requirements are designed to provide sufficient protection against

interference where the device is being used in a business environment.

The device creates and uses high frequencies and can radiate same,

and if it is not installed and used in accordance with this operating

manual, it can cause radio transmission interference. The use of this

device in a living area can also cause interference, and in this case the

user is obliged to cover the costs of removing the interference.

URecycling note:

After usage, this product must be disposed of properly as electronic

waste in accordance with the current disposal regulations of your county

/ state / country.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

8RS20/RS30

Release

2.0

03/06

About this manual

The following manuals are included as PDF files on the enclosed CD ROM:

DUser manual „Installation“

DUser manual „Basic configuration“

DUser manual „Redundancy configuration“

DReference manual „Web-based Interface“ and

DReference manual „Command Line Interface“

If you use Network Management Software HiVision you have further

opportunities to:

Dhave an event logbook.

Dconfigure the „System Location“ and „System Name“.

Dconfigure the network address range and SNMP parameters.

Dsave the configuration on the Switch.

Dsimultaneous configuration of several Switches.

Dconfigure the relevant ports to be displayed red if there is no link state.

Legend

The commendations used in this manual have the following meanings:

DListing

VWork step

USubheading

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

RS20/RS30

Release

2.0

03/06 9

1 Device description

The Open Rail Family RS20/RS30 offers you a variety of more than 450

switch models. You set up your own switch according to your requirements

regarding the number of ports, transmission speed, media type, connector

type, temperature range, certifications and software variant.

The RS20/RS30 devices are designed for the special requirements of

industrial automation. They meet the relevant industry standards, provide

very high operational reliability, even under extreme conditions, and also

long-term reliability and flexibility. The devices operate without fans and

have a redundant voltage supply. The switches are very quickly mounted

by snapping them onto a hat rail.

The HIPER-Ring redundancy concept enables you to quickly carry out a

reconfiguration, and also a simple configuration with only one additional

connection. The diagnosis display and the display of the operating

parameters and IP address information field provide a quick overview.

It can be easily managed via a Web browser, via Telnet, with a management

software product (such as F) or locally on the switch (V.24 interface).

The RS20/RS30 allows you to construct switched industrial ETHERNET

networks that conform to the IEEE 802.3 and 802.3u standards using

copper wires or optical fibers in a bus or ring topology. You can connect

terminaldevicesand other infrastructure componentsviatwisted paircables,

multi-mode LWL and single-mode LWL. The twisted pair ports support

autocrossing, autonegotiation and autopolarity.

Depending on the software you choose, the devices provide you with a large

range of functions:

DRedundancy functions

(Rapid Spanning Tree, Redundant Ring Structure, HIPER-Ring,

Redundant Coupling, Link Aggregation, Redundant Power Supply)

DProtection from unauthorized access

DSynchronized system time in the network

DNetwork load control

DFunction diagnosis

DDiagnostics (hardware self-testing)

DReset

DPriority

DVLAN

DTopology recognition

DWeb-based interface

DCommand Line Interface - CLI

DSNMP

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Andere Handbücher für RS20 series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Hirschmann Netzwerk-Router Handbücher

Hirschmann

Hirschmann HiSecOS EAGLE20 Bedienungsanleitung

Hirschmann

Hirschmann RS20 series Bedienungsanleitung

Hirschmann

Hirschmann SPIDER-SL-40-08T1 Bedienungsanleitung

Hirschmann

Hirschmann SPIDER 3TX-TAP Handbuch

Hirschmann

Hirschmann RS30-...U Series Bedienungsanleitung

Hirschmann

Hirschmann MS30, Power MICE, MACH 4000, OCTOPUS Bedienungsanleitung

Hirschmann

Hirschmann MICE MS20-1600 Series Bedienungsanleitung

Hirschmann

Hirschmann OCTOPUS OS3 Bedienungsanleitung

Hirschmann

Hirschmann RS20 series Bedienungsanleitung

Hirschmann

Hirschmann RS20 series Bedienungsanleitung

Hirschmann

Hirschmann MICE MS20 Bedienungsanleitung

Hirschmann

Hirschmann MICE MS20-0800 Series Bedienungsanleitung

Hirschmann

Hirschmann OWL3G Bedienungsanleitung

Hirschmann

Hirschmann GigaLION-24TP Bedienungsanleitung

Hirschmann

Hirschmann MACH104-20TX-FR Series Bedienungsanleitung

Hirschmann

Hirschmann OWL LTE M12 Bedienungsanleitung

Hirschmann

Hirschmann OCTOPUS 5TX-EEC Handbuch

Hirschmann

Hirschmann MACH 4000 Series Bedienungsanleitung

Hirschmann

Hirschmann Power MICE Bedienungsanleitung

Hirschmann

Hirschmann RS20 series Betriebsanleitung

Hirschmann

Hirschmann RSB20-0800T1T1 Bedienungsanleitung

Hirschmann

Hirschmann OWL LTE M12 Bedienungsanleitung

Hirschmann

Hirschmann MACH 4002 Family Bedienungsanleitung

Hirschmann

Hirschmann SPIDER Premium Line Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise