PIECE-COUNTING FUNCTION
1. Press the key for 2 seconds, the display will show “0” “kg”
2. Press again the key, the display will show “C 10”
3. To select the sample value, press the key
4. Put on the platform the selected number of pieces.
5. Press the to confirm.
6. Display will show the number of pieces placed on platform.
7. Add the rest of pieces to be counted, the display will show the total number of pieces.
8. Press the key for 2 seconds, the indicator will return to normal weighing mode.
Note: The sample unit weight must be higher than 0,2d.
TARE FUNCTION
1. Place a container on the platform.
2. Press the key.
3. The balance will subtract the weight of container, display will show 0
4. Put the product to be weighed in the container.
5. Display will show the product´s weight (net weight)
Note: The container´s weight must be higher than 2% of maximum capacity.
WEIGHTS ACCUMULATION
1. Place the product on the platform.
2. Press the key to save in memory his weight.
3. Display will show the weighing number and weight´s product.
4. Remove the product from platform, display will show “0”
5. Place a new product on the platform.
6. Press again the key to accumulate the weighing.
7. Repeat this operation as many times as it is necessary.
8. Once finished the accumulation, press the key, to read the total weight.
9. Display will show : weighing times and total weight accumulated.
10. To clear, press the key for 2 seconds.
FUNCTIONS SETTING
1. To access to Functions setting, press the key and without release it press the
key, display will show the message “UF __1”.
2. Press the key to select the desired parameter, from “UF—1” to “UF---9”
