Honeywell Captuvo SL22 Bedienungsanleitung

™

Captuvo SL22

Enterprise Sled

User’s Guide

Disclaimer

Honeywell International Inc. (“HII”) reserves the right to make changes in speci-

fications and other information contained in this document without prior notice,

and the reader should in all cases consult HII to determine whether any such

changes have been made. The information in this publication does not repre-

sent a commitment on the part of HII.

HII shall not be liable for technical or editorial errors or omissions contained

herein; nor for incidental or consequential damages resulting from the furnish-

ing, performance, or use of this material.

This document contains proprietary information that is protected by copyright.

All rights are reserved. No part of this document may be photocopied, repro-

duced, or translated into another language without the prior written consent of

HII.

Other product names or marks mentioned in this document may be trademarks

or registered trademarks of other companies and are the property of their

respective owners.

Web Address: www.honeywellaidc.com

Apple and iPod touch are trademarks of Apple Inc., registered in the U.S. and

other countries. App Store is a service mark of Apple Inc.

Other product names or marks mentioned in this document may be trademarks

or registered trademarks of other companies and are the property of their

respective owners.

Product Agency Compliance

Agency Information

USA

FCC Part 15 Subpart B Class B

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference

that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class

B digital device pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a res-

idential installation. This equipment generates, uses, and can radiate radio fre-

quency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. How-

ever, there is no guarantee that interference will not occur in a particular installa-

tion. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the fol-

lowing measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

• Consult the dealer or an experienced radio or television technician for

help.

If necessary, the user should consult the dealer or an experienced radio/televi-

sion technician for additional suggestions. The user may find the following

booklet helpful: “Something About Interference.” This is available at FCC local

regional offices. Honeywell is not responsible for any radio or television interfer-

ence caused by unauthorized modifications of this equipment or the substitution

or attachment of connecting cables and equipment other than those specified

by Honeywell. The correction is the responsibility of the user.

Use only shielded data cables with this system. This unit has been tested with

cables less than 3 meters. Cables greater than 3 meters may not meet class B

performance.

Caution: Any changes or modifications made to this equipment not expressly

approved by Honeywell may void the FCC authorization to operate this equip-

ment.

UL Statement

UL listed: UL60950-1, 2nd Edition.

Canada

Industry Canada ICES-003

This Class B digital apparatus complies with Canadian ICES-003. Operation is

subject to the following conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference

that may cause undesired operation.

Conformité à la règlementation canadienne

Cet appareil numérique de la Classe A est conforme à la norme NMB-003 du

Canada. Son fonctionnement est assujetti aux conditions suivantes :

1. Cet appareil ne doit pas causer de brouillage préjudiciable.

2. Cet appareil doit pouvoir accepter tout brouillage reçu, y compris le

brouillage pouvant causer un fonctionnement indésirable.

C-UL Statement

C-UL listed: CSA C22.2 No.60950-1-07, 2nd Edition.

Europe

The CE marking indicates compliance to 2004/108/EC EMC Directive

with Standards EN55022 CLASS B, EN55024, EN61000-3-2,

EN61000-3-3. In addition, complies to 2006/95/EC Low Voltage Direc-

tive, when shipped with recommended power supply.

For further information please contact:

Honeywell Imaging & Mobility Europe BV

Nijverheidsweg 9-13

5627 BT Eindhoven

The Netherlands

Honeywell International Inc. shall not be liable for use of our product with equip-

ment (i.e., power supplies, personal computers, etc.) that is not CE marked and

does not comply with the Low Voltage Directive.

Waste Electrical and Electronic Equipment Information

Honeywell complies with Directive 2002/96/EC OF THE EUROPEAN PARLIA-

MENT AND OF THE COUNCIL of 27 January 2003 on waste electrical and

electronic equipment (WEEE).

This product has required the extraction and use of natural resources for its pro-

duction. It may contain hazardous substances that could impact health and the

environment, if not properly disposed.

In order to avoid the dissemination of those substances in our environment and

to diminish the pressure on the natural resources, we encourage you to use the

appropriate take-back systems for product disposal. Those systems will reuse

or recycle most of the materials of the product you are disposing in a sound way.

The crossed out wheeled bin symbol informs you that the product should

not be disposed of along with municipal waste and invites you to use the

appropriate separate take-back systems for product disposal.

If you need more information on the collection, reuse, and recycling systems,

contact your local or regional waste administration.

You may also contact your supplier for more information on the environmental

performances of this product.

Chapter 1 - Getting Started

Introduction ................................................................. 1-1

Out of the Box ............................................................. 1-1

Captuvo SL22 ............................................................. 1-2

Front View ............................................................. 1-2

Back View.............................................................. 1-3

Inserting the Battery .................................................... 1-3

Sliding the Apple iPod touch into the Sled .................. 1-4

Security Mechanism.................................................... 1-5

Charging the System................................................... 1-6

Demo Apps ................................................................. 1-6

Application Software ................................................... 1-7

Reading Magnetic Stripe Cards .................................. 1-7

Operating Temperature............................................... 1-7

Reading Techniques ................................................... 1-8

Setting Custom Defaults ............................................. 1-8

Resetting the Custom Defaults ................................... 1-9

Resetting the Factory Defaults.................................. 1-10

Chapter 2 - Input/Output Settings

Good Read and Error Indicators ................................. 2-1

Beeper – Good Read ............................................ 2-1

Beeper Volume – Good Read ............................... 2-1

Manual Trigger Mode .................................................. 2-2

Mobile Phone Read Mode........................................... 2-2

Centering..................................................................... 2-2

Preferred Symbology .................................................. 2-4

High Priority Symbology........................................ 2-4

Low Priority Symbology......................................... 2-5

Preferred Symbology Time-out ............................. 2-5

Preferred Symbology Default ................................ 2-5

Output Sequence Overview ........................................ 2-6

Require Output Sequence..................................... 2-6

Output Sequence Editor........................................ 2-6

Table of Contents

To Add an Output Sequence .................................2-6

Other Programming Selections..............................2-7

Output Sequence Editor ........................................2-8

Partial Sequence ...................................................2-8

Require Output Sequence .....................................2-9

Multiple Symbols..........................................................2-9

No Read.....................................................................2-10

Video Reverse ...........................................................2-11

Chapter 3 - Data Editing

Prefix/Suffix Overview..................................................3-1

To Add a Prefix or Suffix:.......................................3-1

To Clear One or All Prefixes or Suffixes ................3-2

To Add a Carriage Return Suffix to All

Symbologies ..........................................................3-3

Prefix Selections..........................................................3-3

Suffix Selections ..........................................................3-4

Function Code Transmit ..............................................3-4

Chapter 4 - Data Formatting

Data Format Editor Introduction...................................4-1

To Add a Data Format .................................................4-1

Other Programming Selections..............................4-2

Data Format Editor Commands...................................4-3

Move Commands...................................................4-4

Search Commands ................................................4-5

Miscellaneous Commands.....................................4-6

Data Formatter.............................................................4-7

Data Format Non-Match Error Tone ......................4-8

Primary/Alternate Data Formats ..................................4-9

Single Scan Data Format Change .........................4-9

Chapter 5 - Symbologies

All Symbologies ...........................................................5-2

Message Length Description .......................................5-2

iii

Codabar ...................................................................... 5-3

Codabar Concatenation ........................................ 5-4

Code 39....................................................................... 5-6

Code 32 Pharmaceutical (PARAF)........................ 5-8

Full ASCII .............................................................. 5-9

Code 39 Code Page.............................................. 5-9

Interleaved 2 of 5 ...................................................... 5-10

NEC 2 of 5................................................................. 5-12

Code 93..................................................................... 5-14

Code 93 Code Page............................................ 5-14

Straight 2 of 5 Industrial (three-bar start/stop) .......... 5-15

Straight 2 of 5 IATA (two-bar start/stop).................... 5-16

Matrix 2 of 5 .............................................................. 5-17

Code 11..................................................................... 5-18

Code 128................................................................... 5-19

ISBT 128 Concatenation ..................................... 5-19

Code 128 Code Page.......................................... 5-21

GS1-128.................................................................... 5-22

Telepen ..................................................................... 5-23

UPC-A ....................................................................... 5-24

UPC-A/EAN-13

with Extended Coupon Code .................................. 5-26

UPC-E0 ..................................................................... 5-27

UPC-E1 ..................................................................... 5-30

EAN/JAN-13.............................................................. 5-30

ISBN Translate.................................................... 5-32

EAN/JAN-8................................................................ 5-33

MSI............................................................................ 5-35

GS1 DataBar Omnidirectional................................... 5-37

GS1 DataBar Limited ................................................ 5-37

GS1 DataBar Expanded............................................ 5-38

Trioptic Code............................................................. 5-39

Codablock A.............................................................. 5-39

Codablock F .............................................................. 5-41

PDF417 ..................................................................... 5-42

MicroPDF417 ............................................................ 5-43

GS1 Composite Codes ............................................. 5-44

UPC/EAN Version................................................5-44

GS1 Emulation...........................................................5-45

TCIF Linked Code 39 (TLC39) ..................................5-46

QR Code....................................................................5-46

Data Matrix ................................................................5-48

Data Matrix Code Page .......................................5-48

MaxiCode...................................................................5-49

Aztec Code ................................................................5-50

Aztec Code Page.................................................5-50

Chinese Sensible (Han Xin) Code.............................5-51

Postal Codes - 2D......................................................5-52

Single 2D Postal Codes:......................................5-52

Combination 2D Postal Codes:............................5-53

Postal Codes - Linear ................................................5-55

China Post (Hong Kong 2 of 5)............................5-55

Korea Post ...........................................................5-57

Chapter 6 - Serial Programming Commands

Conventions.................................................................6-1

Menu Command Syntax ..............................................6-1

Query Commands........................................................6-2

Responses.............................................................6-2

Resetting the Custom Defaults....................................6-4

Menu Commands ........................................................6-5

Chapter 7 - Maintenance

Repairs ........................................................................7-1

Healthcare Housing Cleaning Directions

(Healthcare unit only)...................................................7-1

Inspecting Cords and Connectors ...............................7-1

Troubleshooting...........................................................7-1

Chapter 8 - Customer Support

Technical Assistance...................................................8-1

Andere Handbücher für Captuvo SL22

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Honeywell Barcode-Lesegerät Handbücher

Honeywell

Honeywell VOYAGER 1200G Bedienungsanleitung

Honeywell

Honeywell XENON 1902 Bedienungsanleitung

Honeywell

Honeywell Voyager 1452g Series Bedienungsanleitung

Honeywell

Honeywell 8670 Bedienungsanleitung

Honeywell

Honeywell XL 800 Series Bedienungsanleitung

Honeywell

Honeywell Vuquest 3310g Bedienungsanleitung

Honeywell

Honeywell Genesis 7580G Technisches Datenblatt

Honeywell

Honeywell Xenon CCB01-010BT-BF Bedienungsanleitung

Honeywell

Honeywell Solaris MS7820 Bedienungsanleitung

Honeywell

Honeywell Xenon XP 195 Series Bedienungsanleitung

Honeywell

Honeywell VOYAGER 1250G Bedienungsanleitung

Honeywell

Honeywell MX7 Tecton Bedienungsanleitung

Honeywell

Honeywell MS9520 Voyager Bedienungsanleitung

Honeywell

Honeywell Virtuos 1D Bedienungsanleitung

Honeywell

Honeywell Fusion MS3780 Bedienungsanleitung

Honeywell

Honeywell Horizon MS7600 Bedienungsanleitung

Honeywell

Honeywell VOYAGER 1200G Bedienungsanleitung

Honeywell

Honeywell DCS19W Bedienungsanleitung

Honeywell

Honeywell 8680i Series Bedienungsanleitung

Honeywell

Honeywell 1400gPDF Bedienungsanleitung

Honeywell

Honeywell Metrologic 3780 Bedienungsanleitung

Honeywell

Honeywell 3820SR0C0B-0FA0E Bedienungsanleitung

Honeywell

Honeywell VOYAGER 1250G Bedienungsanleitung

Honeywell

Honeywell VOYAGER 1202G BF Bedienungsanleitung

Beliebte Barcode-Lesegerät Handbücher anderer Marken

POSMicro

POSMicro Datalogic PowerScan D7100 Bedienungsanleitung

Marson

Marson MT780 Kurzanleitung zur Einrichtung

NCR

NCR RealPOS Bedienungsanleitung

Motorola

Motorola SE3300 Kurzanleitung zur Einrichtung

Element

Element P130BT Bedienungsanleitung

Motorola

Motorola Symbol LS3008 Installations- und Betriebshandbuch

Meec tools

Meec tools OBD-II / VAG Bedienungsanleitung

SICK

SICK CLP 100 Bedienungsanleitung

Royal Tag SA

Royal Tag SA I-Read Bedienungsanleitung

Welch Allyn

Welch Allyn IMAGETEAM 3800 Bedienungsanleitung

Meteor

Meteor 8310 Bedienungsanleitung

Denso

Denso BHT-500B Bedienungsanleitung

Datalogic

Datalogic Heron HD3130 Bedienungsanleitung

Motorola

Motorola MP6000 Montageanleitung

Newland

Newland NLS-HR15-BT Bedienungsanleitung

ARTDEV

ARTDEV AS-1310 Bedienungsanleitung

Aopos

Aopos AS290 Bedienungsanleitung

ENS

ENS 367-5455 Bedienungsanleitung