Honeywell Accenta Bedienungsanleitung

UserGuide

Honeywell Security

Accenta/Optima

Servicing Organisation (Installer) name:

Telephone Number:

Date of Installation:

Account Number:

123

456

789

Accenta G3 mini

0123

5678

1 2 3 4 5 6 7 8

Zones

EKZ014500AEnglish

012 3 4

56 7 8 9

1234 5678

ZONE

Accenta +

Table of Contents

Accenta/Optima User Guide

Contents

Introduction............................................................................................................1

Codes......................................................................................................................1

Alarm System Operation.......................................................................................1

Personal Attack...................................................................................................... 1

Fire Zones ..............................................................................................................1

Power Indicator...................................................................................................... 1

Signalling Device...................................................................................................1

How to Set the System .......................................................................................... 2

How to Unset the System...................................................................................... 3

How to Part Set the System ..................................................................................4

How to Silence an Alarm and Reset the System ................................................5

How to Omit Zones ................................................................................................6

How to Quick Set the System ............................................................................... 7

Single Key Setting ................................................................................................. 7

How to Set Up Chime Mode ..................................................................................8

How to Change the Language.............................................................................. 9

Changing Codes Using User 1...........................................................................10

Changing Codes Using User 2........................................................................... 11

How to Delete User Code 2 ................................................................................. 11

To delete user code 2 using user code 1 .......................................................................12

To delete user code 2 using user code 2 .......................................................................13

Duress Code.........................................................................................................14

How to View the Event Log.................................................................................15

How to Test Your Alarm system .........................................................................16

How to Test the Bell, Strobe and Internal Sounder........................................................16

How to do a Walk Test.........................................................................................18

How to Set up the Time and Date.......................................................................19

Table of Contents

Accenta/Optima User Guide

Introduction

ThisUser Guide tellsyouhowtooperate your intruder alarmsystem.To simplifythisUserGuidewe have

assumedthat thealarmsystemhas beeninstalledbya professional intruderalarmsysteminstaller (thein-

staller),andthat the system is operated in a “typical”way.Aspects of your system that are not “typical” willbe

describedby yourinstaller.

NOTE: Ifyou have anyquestionsaboutyour intruder alarmsystem,thenconsultyour installer,seecontact

detailsat the front of this User Guide.

Codes

Tooperatethe alarm system you willneed to usea code.Acode is 4 digits long,and can be anynumber from

0000to 9999. By defaultuser code1 is[0][1][2][3]but youshould changethis assoon aspossible.

Alarm System Operation

Thisbookletdescribes three versions of the alarm system. The Optimaversion hasthekeypadandindicators

onthemaincontrolpanel.TheAccentaversionhasthekeypadandindicators on a small remote LCD or

LEDkeypad.Youoperatethealarmsystembypressingkeysonthekeypadandviewingtheindicators.Both

alarmsystemsworkthe same way.BothAccenta and Optimasystems can be fitted with an optional remote

keypad.

PersonalAttack

Iftheinstallerhasprogrammed personal attack on the keypads and ifyou are under threat, or arebeing

attacked,you can activate the alarmby pressing the4and 9keys at the sametime on anyLED keypad.You

can also pressthe two keys marked PA onthe remote LCD keypad. Thealarm system willproduce a loud

alarmsound, and the externalsirenwillbeturned on.

Fire Zones

Zones7 and 8 onyour alarmsystem may havea Fireor Smokedetector connected toit. Inthe eventof a fire

thealarm system will produceadistinctivetwo-tonefirealarm sound, and the outsidesirenwillpulse2sec-

ondson,2secondsoff.You should leave the premises immediately,andonlyre-enterwhenit is safe to do so.

Thealarmcanbe silenced by entering your code.

Power Indicator

The indicatoron the control panel orkeypadwilllightwheneverthemains power supply is present. If

mainspower fails thenthe indicatorwillgoout, but the systemwillrunfromits backup batteryforseveral

hours.Ifthe indicatorgoesoutwhenmainspowerispresentthenafaultmayhavedevelopedonyour

systemand youshouldcontact yourinstaller.

Signalling Device

Youralarmsystemmayhave been fittedwithasignalling device.Thisdeviceusesthe telephone linetosendan

alarmmessagetoanAlarmReceivingCentreintheeventofanalarm.The operator at theARC may request

thepolicetoattendyourpremises.

Features

Accenta/Optima User Guide

LCDKeypad:

• Enteryour4-digitcode(0123default) and check thatthe system

isclear.

• Theexittonebeginstosoundandthedisplayshowsprogram1in

processof setting.

• Leavethepremisesbytheagreedexitroute.

• Theexittonebecomes rapid during the last 10 secondsand

thenstopswhenthe system sets. The LED goesoff and

SYSTEMSETappears onthe screen

• After30 seconds the date andtime are displayed.

LEDKeypad:

• Thesystem is unset. The and LEDsare on.

• Enteryour4-digitcode(0123default) and check that the

systemisclear (no zone LED’son).

• Theexittone begins to sound to indicate that the system is

inthe process of setting.

• Leavethepremisesbytheagreedexitroute.

• Theexittonebecomes rapid during the last 10 secondsand

thenstopswhenthe system sets. The LED goes off.

How to Set the System

Whenyou leave your premises you will needtoset(orturnon)theintruder alarm system.

Beforesetting the system you shouldensurethatthepremiseshave been completely vacatedandthatall

doorsand windows areclosed. Ensure that petsdo not have accessto the protected areasas they can

causea false alarm.

NOTE: TheAccentaRemote LED keypad is not shown. ItwillhavethesameindicationsastheOptima

compactpanel withbuilt-inkeypad.

NOTE: Therewillbenoexitbeepsif SilentTimedexitmodewasprogrammed.

LCDKeypad: the LED should be on.The screen showsthe date andtime:

LEDKeypad:the LED should be on.

Enter Your Code

****

[4-digitcode]

Program 1 Set

** SYSTEM SET **

Sunday 01-Jan

14:10

NOTE: Youshould wait until you hear thattheexitbeephasstoppedbeforeassumingthatthesystemisset.

Sunday 01-Jan

14:10

123 45678

ZONE

LED Remote Keypad

[4-digitcode]

Accenta/Optima User Guide

How to Unset the System

Whenyouenter your premises you need to unset (turn off) the system.

LCDKeypad:

• Enter the premises by theagreed entry route. Thesystem

producesan entry tone. The LEDis onand the LEDis

off,indicatingthatthesystemisset.

• Enteryour4-digitcode(0123default).

• The system unsets witha double beep. The LEDcomes on,

indicatingthatthesystemisunset.

• After30secondsthesystemdisplays the date and time.

Sunday 01-Jan

14:10

[4-digitcode]

Sunday 01-Jan

14:10

** SYSTEM UNSET **

LEDKeypad:

• Enter the premises by theagreed entry route. Thesystem

producesan entry tone. The LEDis onand the LEDisoff,

indicatingthatthesystemisset.

• Enteryour4-digitcode(0123bydefault).

• The system unsets witha double beep. The LEDcomes on

indicatingthatthesystemisunset.

IfanyZone, (Tamper)or (Attack)LED’scome on then an alarm has occurred,and an intrusion may

havetaken place. Seekassistancebeforeinvestigatingfurtheras intruders maystillbeonthe premises. Then

resetthesystem.

When you enter your premises you havea short period of time,usually 30 seconds, to enter yourcode. If you

failtodothisthesystem goes into alarm. Enter your code to stop thealarm.

How to Unset the System

[4-digitcode]

Accenta/Optima User Guide

How to Part Set the System

Ifyourinstallerhas programmed your system for partsetoperationyoucansetcertainzonesofthesystem

whileothers remain unset. Part setoperationisoftenusedatnight time, and it permitsyoutofreelywalk

aroundthebedroomswhilethe living area and outside doors areprotected.Yoursystem may have 2 part-set

programscalledProgram2 and Program 3.

Beforepart-settingthesystemyoushould ensure that all doors and windows areclosed. Ensure that pets do

nothaveaccessto the protected areas.Yourinstaller mayhave instructed you to usea differentkeypadtothe

onenormally used to set the system.

LCDKeypad:

• The LEDshouldbe on. The screen shows thedate and time:

• Enteryour code [0][1][2][3].Theexit beep starts.

• Press . The exit tone stops.

• Selectpart-set program [2] or [3].The system setaftera

shorttime.The LEDgoesout.

NOTE: Thereareno exit beeps if SilentTimed exit mode

hasbeen programmed.

How to Part Set

Sunday 01-Jan

14:10

[4-digitcode]

** SYSTEM SET **

Sunday 01-Jan

14:10

Program 1 Set

Set System

Select 1 2 or 3

[2 or 3]

Accenta/Optima User Guide

LEDKeypad:

The LEDshouldbe on.

• Enteryour code [0][1][2][3].The exitbeep starts.

• Press the key.Theexit tone stops andthe zone LED’s1to 3

comeon.

• Select part-set program [2]or [3]. The systemsetsafter a

shorttime.The LEDgoesout.

NOTE: Thereare no exit beeps ifSilentTimedexit mode hasbeen

programmed.

Ifyoursystem goes into alarm then be aware that intruders may bein

thepremises. Seek assistance before investigatingthecauseofthe

alarm.

LCDKeypad:

• Enteryour code [0][1][2][3].The alarm stops.

• Thescreen alternates, showing what caused the alarm and

promptingfor user reset.

Whentwoormorealarmshaveoccured,thefirstalarm

hasan F below thezone number, TamperorPA.

Subsequentalarms willhavea 1indicatingwherethealarm has

takenplace.

• Press .Thesystem resets and displays thedate and time if

thereare no openTampers, PAorFire zones tocause afault

lockout.

Thesystemcan be reset by the user only if the installer has

programmedit to doso.If the messageEngineer Restore

Requiredappears on screenthen the usermust contact

theinstaller.

• After30secondsthesystemdisplays the date and time.

How to Silence an Alarm and Reset the System

How to Silence an Alarm

[0][1][2][3]then

[2 or 3]

Zones

123

45678

Zones

123

45678

Zones

123

45678

12345678 TP

00100000 0F

[0][1][2][3]

Restored

by User

Enter Your Code

User Restore

Press Reset

Sunday 01-Jan

14:10

Accenta/Optima User Guide

LEDKeypad:

• Enteryour code [0][1][2][3].

Thealarm stops, andtheZone, or LED’s comeon toshowthe

causeof the alarm.

NOTE: When2 or more LED’sareon,the flashing indicator shows the first

alarm,andthesteadyindicatorsshowthesecond and subsequent

alarms.

• Press .

• If the Zone, or LED’s go out and the LEDcomes

onthenthe system has been reset.

Ifany of the LED’scontinue to flash then the systemhasbeen

programmedtoberesetbytheinstaller. In this case you must call the

installerto reset thesystem.

Ifall LED’slight steady (notflashing),andthekeypad stopsworking,then

thesystem hasenteredafault-lockout.Youmustcallthe installertorectify

thisfault.

How to Omit Zones

Ifyoucannotsetthealarmsystembecauseadetectorisfaultyandinconstantalarmyoumayneedtoomitits

zonefrom the alarm system.Azonewhichhasbeenomittedcannotcause an alarm. Omitted zoneswillbe

restoredafterthesystemisunset.

Beforea zone can beomitted ithas tobe enabledby theinstaller asa Used Zoneand asan OmitAllow

zone.

LCDKeypad:

• Enteryour[4-digitcode] to startthe exit procedure(for

more informationsee Howto Setthe System).

• Press andthe exit beeptone stops,andthe first

usedzonethat can be omitted appearson the display.

• Pressthe zone [number] or tobe omitted.

Thedisplaynowshowsthe zone as omitted. If a long

reject toneisheard,thenthezone cannot be omitted.

• Press orallow the system to continueto set.

NOTE: Zn= Zonenumber

How to Omit Zones

[0][1][2][3]

Zones

123

45678

Zones

123

45678

[4-digitcode]

Program 1 Set

Zn: [Descriptor]

Not Omitted

Zn: [Descriptor]

Omitted

[4]

** SYSTEM SET **

Andere Handbücher für Accenta

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Honeywell Bedienfeld Handbücher

Honeywell

Honeywell Fire-Lite Alarms MS-5UD Series Bedienungsanleitung

Honeywell

Honeywell MiniZone EMM-3U Bedienungsanleitung

Honeywell

Honeywell MiniZone EMM-3 Bedienungsanleitung

Honeywell

Honeywell Fire-Lite Alarms ES-200X Bedienungsanleitung

Honeywell

Honeywell AQ255 Series Bedienungsanleitung

Honeywell

Honeywell NOTIFIER AM-8200 Betriebsanleitung

Honeywell

Honeywell NOTIFIER NFW-50X Bedienungsanleitung

Honeywell

Honeywell SILENT KNIGHT 6700 Bedienungsanleitung

Honeywell

Honeywell MB-Secure 1000 Bedienungsanleitung

Honeywell

Honeywell Notifier ID3000 Series Leitfaden

Honeywell

Honeywell PL-1000 Bedienungsanleitung

Honeywell

Honeywell Gamewell GFANN-80 Technisches Handbuch

Honeywell

Honeywell Ademco Accord Bedienungsanleitung

Honeywell

Honeywell Gamewell Flex 402 Bedienungsanleitung

Honeywell

Honeywell Galaxy Dimension GD-48 Bedienungsanleitung

Honeywell

Honeywell Galaxy Flex Benutzerhandbuch

Honeywell

Honeywell Fire-Lite Alarms ES-50X Bedienungsanleitung

Honeywell

Honeywell H-S81-HS Bedienungsanleitung

Honeywell

Honeywell 6820 Bedienungsanleitung

Honeywell

Honeywell Notifier NFS-320/E/C Bedienungsanleitung

Honeywell

Honeywell TrueZONE HZ432K/U Bedienungsanleitung

Honeywell

Honeywell SLC Bedienungsanleitung

Honeywell

Honeywell Notifier ID3000 Series Bedienungsanleitung

Honeywell

Honeywell AQ250 Series Bedienungsanleitung

Beliebte Bedienfeld Handbücher anderer Marken

RDZ

RDZ PC-HRX Bedienungsanleitung

STG-BEIKIRCH

STG-BEIKIRCH MZ3 Technisches Handbuch

Efka

Efka Variocontrol V810 Bedienungsanleitung

Cebora

Cebora 208-10 Bedienungsanleitung

AMX

AMX AutoPatch CP-15 Bedienungsanleitung

Satel

Satel CA-6 KLED-S Bedienungsanleitung

Evolution

Evolution IQ plus 800 Bedienungsanleitung

Fagor

Fagor 8040 TCO CNC Bedienungsanleitung

Trane

Trane ComfortLink II XL950 Control Bedienungsanleitung

AKO

AKO PROCool AKO-17635-2 Bedienungsanleitung

ABB

ABB 6136/30M-101 Bedienungsanleitung

Telikou

Telikou BK-603 Belt Pack Bedienungsanleitung

Mapei

Mapei Mapeheat Thermo Touch Bedienungsanleitung

Bosch

Bosch D9412GV4 Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SC-SL4-AE2/1 Bedienungsanleitung

Sminn

Sminn BOX L VF1L EI Bedienungsanleitung

Balboa

Balboa TP600 Bedienungsanleitung

Nice

Nice HSCU1 Technische Daten