Honeywell BW IntelliFlash GasAlertMax XT II Bedienungsanleitung

36 5062-26-NCL-EN

H2S, CO, O2, LEL

Go the distance, and save

GasAlertMax XT II is the smart, simple, economical way to compliance.

Workers feel safe and incidents are minimized so everyone will be able

to do more. That means savings realized from business continuity and

productivity.

Simple operation, with SmartSample pump.

GasAlertMax XT II reliably monitors up to four hazards and combines

straightforward one-button operation, a robust, motorized pump

for remote sampling, and now features IntelliFlash, the flashing LED

compliance indicator that tells you at-a-glance your gas detector is

functioning correctly. The GasAlertMax XT II is fully compatible with

MicroDock II automated test and calibration system.

Standard Package Contents

• Detector complete with specified sensor(s), stainless steel alligator clip

and concussion-proof housing

• Rechargeable battery

• Wall outlet charging adaptor

• 3 ft. / 1 m calibration hose with quick connect

• 10 ft. / 3 m sampling hose with particulate filter and quick connect

• Reversible screwdriver

• Kit of spare pump filters (5 particulate and 5 hydrophobic)

• Manual

• Multi-language CD manual

General Specifications

Size 5.1 x 2.8 x 2.0 in. / 13.1 x 7.0 x 5.2 cm

Weight 11.5 oz. / 328 g

Typical battery life 13 hours @ 32ºF / 0ºC

8 hours @ -4ºF / -20ºC

Recharges in 6 hours

Certiﬁcations and

approvals nClass I, Div. 1, Gr. A, B, C, D

IECEx: Ga Ex ia IIC T4

ATEX: XgII 1 G

Ga Ex ia IIC T4

INMETRO: BR-Ex ia IIC T4

Warranty Full two year warranty including all sensors

6570-0

Multi-Gas (1–4) Detector

5062-26-NCL-EN 37

Order Number

GasAlertMax XT II 4-Gas Detector Yellow Black

%LEL, O2, H2S, CO XT-XWHM-Y-NA XT-XWHM-B-NA

GasAlertMax XT II 3-Gas Detector Yellow Black

%LEL, O2. H2S XT-XWH0-Y-NA XT-XWH0-B-NA

%LEL, O2, CO XT-XW0M-Y-NA XT-XW0M-B-NA

O2, H2S, CO XT-X0HM-Y-NA XT-X0HM-B-NA

GasAlertMax XT II 2-Gas Detector Yellow Black

%LEL, O2XT-XW00-Y-NA XT-XW00-B-NA

H2S, CO XT-00HM-Y-NA XT-00HM-B-NA

O2, H2S XT-X0H0-Y-NA XT-X0H0-B-NA

O2, CO XT-X00M-Y-NA XT-X00M-B-NA

GasAlertMax XT II 1-Gas Detector Yellow Black

O2XT-X000-Y-NA XT-X000-B-NA

H2S XT-00H0-Y-NA XT-00H0-B-NA

CO XT-000M-Y-NA XT-000M-B-NA

GasAlertMax XT II Region Codes

For orders outside North America, change order number sufﬁx “-NA” to:

“-EU” Europe “-BR” Brazil

“-UK” United Kingdom “-OR” Other region with 3-pin UK plug

“-AU” Australia “-OE” Other region with 2-pin UK plug

“-CN” China/New Zealand

Gas Legend

%LEL Combustible (W)

O2Oxygen (X)

H2S Hydrogen sulﬁde (H)

CO Carbon monoxide (M)

MicroDock II

Automatic test and calibration station

(see MicroDock II section for additional information)

Multi-Gas (1–4) Detector

38 5062-26-NCL-EN

GasAlertMax XT II (continued)

Confined Space Kits Order Number

GasAlertMax XT II Conﬁned Space Kit - includes GasAlertMax XT II detector (% LEL, O2, H2S, CO) and

standard package contents, plus wall charging adapter, IR Connectivity Kit with Fleet Manager II software,

sampling probe, hydrophobic (5) and particulate (5) pump ﬁlters, 10 ft. / 3 m sampling hose, calibration gas

(2.5% CH4,18% O2, 25 ppm H2S, 100 ppm CO) and 0.5 LPM regulator

XT-XWHM-Y-NA-CS

GasAlertMax XT II Deluxe Conﬁned Space Kit - includes IR Connectivity Kit with Fleet Manager II software,

sampling probe, 10 ft. / 3 m sampling hose, 3 ft. / 1 m hose, concussion-proof boot, carrying holster and

0.5 LPM regulator

Detector and calibration gas sold separately.

XT-CK-DL

Carrying case for GasAlertMax XT II with foam insert

Detector and calibration gas sold separately.

XT-CK-CC

Carrying & Protective Accessories Order Number

Concussion-proof boot with stainless steel alligator-style clip GA-BXT

Carrying holster for GasAlertMax XT II and sampling hose GA-HXT

Neck strap with safety release GA-NS-1

Extension strap (4 ft. / 1.2 m) GA-ES-1

Short strap (6 in. / 15.2 cm) GA-LY-1

Chest harness GA-CH-2

Sampling/Testing Equipment and Spares Order Number

Auxiliary pump ﬁlter (kit of 5) M5-AF-K2

Auxiliary pump ﬁlter (kit of 100) M5-AF-K2-100

Hydrophobic pump ﬁlter (thick) replacement (kit of 5) XT-RF-H5

Hydrophobic pump ﬁlter (thick) replacement (kit of 50) XT-RF-H50

Hydrophobic pump ﬁlter (thick) replacement (kit of 100) XT-RF-H100

Particulate pump ﬁlter (thin) replacement (kit of 5) GA-PFMAX

Particulate pump ﬁlter (thin) replacement (kit of 50) GA-PFMAX-50

Particulate pump ﬁlter (thin) replacement (kit of 100) GA-PFMAX-100

Quick connect ﬁtting spares for hoses (kit of 2) M0931K

Note: For complete list of Sampling & Testing Equipment, see the Sampling Equipment section.

Concussion-Proof Boot

GA-BXT

Carrying Holster

GA-HXT

Sampling Probe

GA-PROB1-1

Multi-Unit Cradle Charger

XT-C01-MC5

Simultaneously charge ﬁve detectors

Multi-Unit Power Adaptor

GA-PA-1-MC5-NA

Simultaneously charge ﬁve detectors

Vehicle Power Adaptor

12-24 Vdc

GA-VPA-1

Direct-Wire Power Adaptor

12-24 Vdc

GA-PA-3

Used for emergency vehicles and

other applications

Confined Space Kit

XT-XWHM-Y-NA-CS

5062-26-NCL-EN 39

GasAlertMax XT II (continued)

Power Accessories Order Number

Multi-unit (5) cradle charger XT-C01-MC5

Multi-unit (5) wall outlet power adaptor GA-PA-1-MC5-NA*

12-24 Vdc vehicle power adaptor GA-VPA-1

12-24 Vdc direct-wire power adaptor GA-PA-3

Replacement wall outlet power adaptor GA-PA-1-NA*

*For regions outside North America replace “-NA” with: “-EU” for Europe, “-UK” for United Kingdom and “-AU” for Australia/China.

Datalogging Accessories Order Number

IR connectivity kit with Fleet Manager II software GA-USB1-IR

MicroDock II Order Number

MicroDock II Automated Calibration and Testing Station:

- base station and GasAlertMax XT II docking module with charging cable

- base station and GasAlertMax XT II docking module without charging cable

- GasAlertMax XT II docking module with charging cable

- GasAlertMax XT II docking module without charging cable

GasAlertMax XT II modules are backwards compatible with legacy GasAlertMax XT models.

For complete MicroDock II system conﬁguration information, see MicroDock II section.

DOCK2-2-1C1M-00-G

DOCK2-2-1M-00-G

DOCK2-0-1C1M-00-G

DOCK2-0-1M-00-G

Replacement Sensor Screens Order Number

Replacement quad sensor screens for GasAlertMax XT II (kit of 2) XT-SS-1

Replacement quad sensor screens For GasAlertMax XT II (kit of 10) XT-SS-K2

Replacement Sensors Order Number

Replacement MICROpeL®combustible (LEL) sensor SR-W-MP75C

Replacement oxygen (O2) sensor (for use with GasAlertMax XT II only) SR-X2V

Replacement oxygen (O2) sensor SR-X10-C1

Replacement MICROceL®hydrogen sulﬁde (H2S) sensor SR-H-MC

Replacement MICROceL®carbon monoxide (CO) sensor SR-M-MC

Dummy sensor for combustible (LEL) sensor location SR-W-MC-DUM

Dummy sensor for oxygen (O2) sensor location SR-DUMM1

Dummy sensor for toxic sensor locations SR-TOX-MC-DUM

Calibration & Testing Equipment

For calibration and testing equipment for this product, please see pages 86-89.

IR Connectivity Kit

GA-USB1-IR

Use for data download and

instrument set-up options

Auxiliary Pump Filter

M5-AF-K2 / M5-AF-K2-100

For high dust environments;

available in kits of 5 or 100

Hydrophobic Pump Filter (Thick)

XT-RF-H5 / XT-RF-H50 / XT-RF-H100

Particulate Pump Filter (Thin)

GA-PFMAX / GA-PFMAX-50 / GA-PFMAX-100

Both are available in kits of 5, 50 or 100

Quick Connect Fitting

M0931K

Quick connect ﬁtting for hoses, kit of two

40 5062-26-NCL-EN

GasAlertMax XT II (continued)

How to Replace the Battery

1. With detector OFF, use No. 1 Phillips screwdriver to loosen

retaining screw on pump enclosure (H)

2. Lift pump enclosure (H) so it unhooks from back enclosure (G)

3. Use No. 1 Phillips screwdriver to remove 6 screws from back

enclosure (G)

4. Lift back enclosure (G) straight up

5. Lift battery (E) straight up, un-thread wires and disconnect

battery wires from the battery connector (P)

6. Connect new battery wires (P), re-thread wires and place new

battery on PCB (D)

7. Replace back enclosure (G)

8. Replace 6 screws in back enclosure (G) and hand-tighten until

ﬁrm

9. Replace pump enclosure (H) and hand-tighten retaining screw

until ﬁrm

How to Replace the Pump Module

1. With detector OFF, use No. 1 Phillips screwdriver to loosen

retaining screw on pump enclosure (H)

2. Lift pump enclosure (H) so it unhooks from back enclosure (G)

3. Use No. 1 Phillips screwdriver to remove 6 screws from back

enclosure (G)

4. Lift back enclosure (G) straight up

5. Lift battery straight up and un-thread pump module (F) wires

6. Disconnect hose with connector from the black housing of the

pump module (F)

7. Lift pump module (F) straight up and disconnect pump

module (F) wires from the pump connector (Q)

8. Connect new pump module wires (Q), re-thread wires and

place new pump module (F) on PCB (D)

9. Reconnect hose with connector to the black housing of the

pump module (F)

10. Return battery to PCB (D) and replace back enclosure (G)

11. Replace 6 screws in the back enclosure (G) and

hand-tighten until ﬁrm

12. Replace pump enclosure (H) and hand-tighten retaining screw

until ﬁrm

Note: Please refer to the instrument’s documentation (shipped with the product or available at www.gasmonitors.com) for complete instructions on common service

procedures. Improper servicing or maintenance may affect warranty eligibility. Honeywell assumes no liability for damages resulting from improper servicing or maintenance.

5062-26-NCL-EN 41

GasAlertMax XT II (continued)

Note: Please refer to the instrument’s documentation (shipped with the product or available at www.gasmonitors.com) for complete instructions on common service

procedures. Improper servicing or maintenance may affect warranty eligibility. Honeywell assumes no liability for damages resulting from improper servicing or maintenance.

Legend Service Parts Order Number

BReplacement front enclosure (yellow) for GasAlertMax XT II XT-FC1-1

Replacement front enclosure (black) for GasAlertMax XT II XT-FC1B-1

GReplacement back enclosure (yellow) with screws for GasAlertMax XT II XT-BC1

Replacement back enclosure (black) with screws for GasAlertMax XT II XT-BC1B

OReplacement sensor enclosure with screw (yellow) with screw for GasAlertMax XT II XT-SC1

Replacement sensor enclosure with screw (black) with screw for GasAlertMax XT II XT-SC1B

HReplacement pump enclosure (yellow) with screw for GasAlertMax XT II XT-PC1

Replacement pump enclosure (black) with screw for GasAlertMax XT II XT-PC1B

DReplacement main PCB with screws for GasAlertMax XT II XT-MPCB2

EReplacement battery kit for GasAlertMax XT II XT-BAT-K1

FReplacement pump kit for GasAlertMax XT II XT-RPUMP-K1

Replacement alligator clip with screw for GasAlertMax XT II XT-AG-1

AReplacement LCD kit for GasAlertMax XT II XT-LCD-K1

Replacement screw kit for GasAlertMax XT II XT-SCREW-K1

How to Replace a Sensor

1. With detector OFF, use No. 1 Phillips screwdriver to loosen

retaining screw on pump enclosure (H)

2. Lift pump enclosure (H) so it unhooks from back enclosure (G)

3. Use No. 1 Phillips screwdriver to remove 6 screws from back

enclosure (G)

4. Lift back enclosure (G) straight up

5. Use No. 1 Phillips screwdriver to remove 2 screws from back

of PCB (D)

6. Lift PCB (D) together with battery and sensors straight up

7. Remove sensor (C, K, L) by sliding out or sensor (M) by pulling

straight up from PCB (D)

8. Insert new sensor (C, K, L, M) into PCB (D)

9. Replace PCB (D) and 2 screws and hand-tighten until ﬁrm

10. Replace back enclosure (G)

11. Replace 6 screws in the back enclosure (G) and

hand-tighten until ﬁrm

12. Replace pump enclosure (H) and hand-tighten retaining screw

until ﬁrm

How to Replace the Sensor Screen

1. With detector OFF, use No. 1 Phillips screwdriver to loosen

retaining screw on pump enclosure (H)

2. Lift pump enclosure (H) so it unhooks from back enclosure (G)

3. Use No. 1 Phillips screwdriver to remove 6 screws from back

enclosure (G)

4. Lift back enclosure (G) straight up

5. Use No. 1 Phillips screwdriver to remove 2 screws from back

of PCB (D)

6. Lift PCB (D) together with battery and sensors straight up

7. Remove sensor screen (N) from front enclosure (B) by pulling

straight up

8. Insert new sensor screen (N) into front enclosure (B)

9. Replace PCB (D) and 2 screws and hand-tighten until ﬁrm

10. Replace back enclosure (G)

11. Replace 6 screws in the back enclosure (G) and

hand-tighten until ﬁrm

12. Replace pump enclosure (H) and hand-tighten retaining screw

until ﬁrm

Andere Honeywell Gaswarngerät Handbücher

Honeywell

Honeywell NOTIFIER VGS Series Bedienungsanleitung

Honeywell

Honeywell Midas-M Bedienungsanleitung

Honeywell

Honeywell MultiRAE Bedienungsanleitung

Honeywell

Honeywell 3000 MkIII Series Bedienungsanleitung

Honeywell

Honeywell BW GasAlertMicroClip XT Bedienungsanleitung

Honeywell

Honeywell ToxyPoint Bedienungsanleitung

Honeywell

Honeywell Touchpoint Plus Bedienungsanleitung

Honeywell

Honeywell Rae Systems MeshGuard Kurzanleitung

Honeywell

Honeywell E3Point Bedienungsanleitung

Honeywell

Honeywell BW Technologies GasAlert Quattro Bedienungsanleitung

Honeywell

Honeywell FS20X Series Bedienungsanleitung

Honeywell

Honeywell Signalpoint Pro Bedienungsanleitung

Honeywell

Honeywell BW Technologies Clip Real Time Bedienungsanleitung

Honeywell

Honeywell BW Ultra Bedienungsanleitung

Honeywell

Honeywell SEARCHLINE EXCEL EDGE Bedienungsanleitung

Honeywell

Honeywell BW MaxXT II Bedienungsanleitung

Honeywell

Honeywell Sensepoint XCL Bedienungsanleitung

Honeywell

Honeywell BW Icon Bedienungsanleitung

Honeywell

Honeywell Gamewell-FCI E3 Series Bedienungsanleitung

Honeywell

Honeywell Sensepoint XRL Bedienungsanleitung

Honeywell

Honeywell BW Icon Bedienungsanleitung

Honeywell

Honeywell BW Technologies GasAlert MicroClip XT Bedienungsanleitung

Honeywell

Honeywell Sensepoint XCD Gebrauchs- und Pflegehandbuch

Honeywell

Honeywell RAEGuard 3 Bedienungsanleitung

Beliebte Gaswarngerät Handbücher anderer Marken

Macurco

Macurco GD-6 Bedienungsanleitung

Evikon

Evikon E2632 Bedienungsanleitung

Critical Environment Technologies

Critical Environment Technologies CGAS-A Series Bedienungsanleitung

MSA

MSA altair 5 Bedienungsanleitung

DOD Technologies

DOD Technologies ChemLogic CL96 Bedienungsanleitung

DEGA

DEGA NS III LCD Series Bedienungsanleitung

RKI Instruments

RKI Instruments 35-3001A-08-01 Bedienungsanleitung

Sygonix

Sygonix 2483186 Bedienungsanleitung

Perry

Perry 1GA 50917MET/P Bedienungsanleitung

isweek

isweek AS8900 Bedienungsanleitung

Oldham

Oldham OLC 10 Bedienungsanleitung

Wizmart

Wizmart NB983 Bedienungsanleitung

Beacon

Beacon MEGA Handbuch

RKI

RKI GX-6000 Bedienungsanleitung

Dräger

Dräger PIR 7000 Bedienungsanleitung

GDS

GDS GASMAX EC Bedienungsanleitung

Seitron

Seitron BE COOL R1 Bedienungsanleitung

MSA

MSA ULTIMA X5000 Bedienungsanleitung