Honeywell XP Series Gebrauchsanweisung

XP Series Personal Gas Detector

Operating Instructions and

Maintenance Manual

XP Series Personal Gas Detector 3

1. Introduction ...........................................................................................5

2. Turning the Detector On and Off..........................................................6

3. Display Features ...................................................................................7

4. Gas Alarms ............................................................................................ 7

5. Maximum (Peak) Gas, STEL and TWA Reading..................................9

6. Performing a Self-Test ........................................................................10

7. Testing Sensors and Alarms (Bump Testing) ...................................11

8. Low Battery..........................................................................................11

9. Error Codes .........................................................................................11

10. Alarm Occurred Indication...............................................................11

11. Confidence Flash/beep.....................................................................12

12. Zero Calibration (Oxygen Span) ......................................................12

13. Span Calibration (Toxic Versions Only)...........................................13

14. Changing the Detector Set-up .........................................................15

15. Specifications....................................................................................19

16. Contacting Honeywell Analytics......................................................20

17. Sensor Cross Sensitivity Data .........................................................21

18. Accuracy Statement..........................................................................23

19. Replacing the Battery or Sensor .....................................................23

20. Warnings ............................................................................................24

21. Warranty.............................................................................................25

22. Other Gases.......................................................................................27

23. Replacement Parts............................................................................28

24. Calibration Accessories ................................................................... 29

Table of Contents

XP Series Personal Gas Detector

This manual is supplied pre-printed in English only. Alternative language versions are available for

download from the Honeywell Analytics website: www.honeywellanalytics.com

Dit handboek is alleen beschikbaar in de Engelse taal. Alternatieve talen versies zijn electronisch

beschikbaar via onze web pagina van Honeywell Analytics: www.honeywellanalytics.com

Ce manuel est fourni préimprimé en anglais seulement. Les versions alternatives de langue sont

disponibles pour le téléchargement du website www.honeywellanalytics.com de Honeywell Analytics

Se provee este manual imprimió en inglés solamente. Las versiones alternativas de la lengua están

disponibles para la transferencia directa del website www.honeywellanalytics.com de Honeywell

Analytics

Questo manuale viene fornito stampato solo in Inglese. Versioni in altre lingue, incluso l’italiano, sono

disponibili e possono essere scaricate dal sito web della Honeywell Analytics www.honeywellanalytics.

com

Diese Bedienungsanleitung wird in gedruckter Form nur in englischer Sprache verfügbar sein. Zusätzliche

Sprachen stehen zum Download auf folgender Webseite zur Verfügung. www.honeywellanalytics.com

XP Series Personal Gas Detector 5

WARNING: Read Manual Prior to Use

1. Introduction

The XP Series is an easy to use, personal gas detector, designed for monitoring the atmosphere for

potentially hazardous levels of oxygen deﬁciency or toxic gas. It has built-in cell decay compensation,

thermal shock protection, and Reﬂex™, a patented sensor failure detection system, for maximum

reliability.

SAFETY INFORMATION

Substitution of components may impair intrinsic safety

Only use speciﬁed batteries: Energizer® CR2 or Sanyo CR2

Do not activate the detector after the date on the packaging

Perform a self-test prior to each day’s use (See Section 6)

Do not use in oxygen-enriched atmospheres

Periodically test the sensor’s response to gas by exposing the detector to a target gas concentration

that exceeds the alarm set points. Manually verify that the audible, visual and vibrating alarms

are activated.

Exposure to extremely high levels of over-range gas may cause temporary loss of sensor accuracy.

Allow detector to stabilize in a zero gas atmosphere before reuse. It is recommended to perform

a sensor response gas test prior to reuse.

IMPORTANT NOTICE

Honeywell Analytics can take no responsibility for the use of its equipment if it is not used in accordance

with the appropriate issues and/or amendments of the relevant manual. If further details are required

which do not appear in this manual, contact Honeywell Analytics or their agent.

Honeywell Analytics shall not be liable for any incidental or consequential damages in connection with

any deletions, errors or omissions in this manual.

•

XP Series Personal Gas Detector

What’s in the Box?

XP Series Personal Gas Detector

Test Adapter

Operating Instructions and Maintenance Manual

Certiﬁcate of Calibration

Product Overview

Visual Alarm

Display

Gas Type

Audible Alarm

On/Off Button

Sensor

Belt Clip

Up Button

Down Button

2. Turning the Detector On and Off

Press the On/Off button for one second and the XP will turn on.

The detector will emit 5 beeps and 5 ﬂashes. XP will warm up for 30 seconds, showing a countdown in

seconds and the Test Pass icon ( ) will be ﬂashing. It will then perform a self-test. If the detector passes

the Test Pass icon ( ) is displayed. If the Test Fail icon ( ) is displayed then the detector has failed the

self-test – please refer to the instructions in Section 6.

To turn off the XP press and hold the On/Off button for 5 seconds - a countdown will be displayed.

•

XP Series Personal Gas Detector 7

3. Display Features

Battery

Fail Icon

Self-Test Pass Icon

Level 1: O2and Toxics

Level 2: Toxics

Level 2: O2

STEL/TWA Alarm

Cal. Status Icon

Low Peak (O2), High Peak (Toxics)

Gas Concentration and Units

Alarm Icon

The XP LCD has a backlight that will operate automatically whenever an alarm occurs, and also whenever

any button is pressed.

4. Gas Alarms

The XP has two levels of instantaneous gas alarms, of which the level 2 alarm is more urgent than the

level 1 alarm. XP also has a 15 minute STEL alarm and an 8 hour TWA alarm. The alarm set points can

be set by the user on the detector. It is supplied with the following default alarm set points:

Gas Type Level 1 Alarm Level 2 Alarm STEL Alarm TWA Alarm

H2S 10 ppm 15 ppm 15 ppm 10 ppm

CO 35 ppm 100 ppm 400 ppm 35 ppm

O223.5% v/v 19.5% v/v N/A N/A

For other toxic gases, see Section 22 Other Gases.

XP Series Personal Gas Detector

Alarm Level Display* Audible Alarm Visual Alarm Vibrating Alarm

Level 1 alarm

blink

3 beeps per

second

3 ﬂashes per

second

Once every 2

seconds

Level 2 alarm

blink

5 beeps per

second

5 ﬂashes per

second

Once every 2

seconds

STEL alarm

blink

5 beeps per

second

5 ﬂashes per

second

Once every 2

seconds

TWA alarm

blink

5 beeps per

second

5 ﬂashes per

second

Once every 2

seconds

* Examples shown for H2S

Note:

When the detected gas level returns to a safe level the gas alarm will stop, unless the alarm

mode is set to latching. The user cannot cancel an alarm.

If the measured reading exceeds the range of the sensor then the numerical digits will ﬂash

the full scale value.

XP Series Personal Gas Detector 9

5. Maximum (Peak) Gas, STEL and TWA Reading

The XP records the maximum readings (and also, minimum for oxygen) measured, and the STEL and

TWA values (except oxygen). These can be viewed by pressing the Up/Down buttons to scroll through

the displays.

a) normal CO b) the CO STEL/TWA values measured

STEL value TWA value

c) the maximum (peak CO) reading measured

To clear the peak reading, press the On/Off button once when the peak value is displayed on the LCD.

XP Series Personal Gas Detector

6. Performing a Self-Test

When the On/Off button is pressed the detector checks the sensor, circuit, batteries, audible and visual

alarms, and vibrating alarm.

The XP reminds the user that a Self-Test is required by blinking the Test Pass icon ( ) 24 hours after

switch-on. The Self-Test must then be performed, by pressing the On/Off button. The detector will do

the following:

Turn on all the display elements

Test the audible and visual alarms and vibrating alarm

Check the battery, electronic circuit and sensor

Display the level 1 and level 2 alarm set points

Display the STEL and TWA alarm set points

Display the peak, STEL and TWA values

Display the result of the self-test as follows:

Self-Test Result Display Audible Alarm Visual Alarm

Pass None None

Fail 1 long beep 1 ﬂash

If the self-test fails, repeat the self-test. The XP will warm up for one minute before the next self-test is

performed. If it fails three consecutive times then the detector will display an error code (see Section

9).

Additionally, the XP will periodically check its battery, electronic circuit and sensor. If it fails, the Test

Fail icon ( ) will be shown and the Test Pass icon ( ) will blink. If it passes then the Test Pass icon

will be displayed.

•

Inhaltsverzeichnis

Andere Honeywell Gaswarngerät Handbücher

Honeywell

Honeywell BW Technologies GasAlertMicro 5 Bedienungsanleitung

Honeywell

Honeywell BW Ultra Bedienungsanleitung

Honeywell

Honeywell Touchpoint Plus Versionshinweis

Honeywell

Honeywell HON COCON 13 Bedienungsanleitung

Honeywell

Honeywell 3000 MkIII Series Bedienungsanleitung

Honeywell

Honeywell BW Clip Real Time Bedienungsanleitung

Honeywell

Honeywell NOTIFIER VGN Series Bedienungsanleitung

Honeywell

Honeywell GasAlertMicro 5 Series Bedienungsanleitung

Honeywell

Honeywell BW GasAlertQuattro Bedienungsanleitung

Honeywell

Honeywell FS20X Series Bedienungsanleitung

Honeywell

Honeywell BW Ultra Bedienungsanleitung

Honeywell

Honeywell Touchpoint Plus Bedienungsanleitung

Honeywell

Honeywell Sensepoint XCL Bedienungsanleitung

Honeywell

Honeywell SEARCHZONE SONIK SZSK-SMG Series Bedienungsanleitung

Honeywell

Honeywell SEARCHLINE EXCEL PLUS Benutzerhandbuch

Honeywell

Honeywell BW MaxXT II Bedienungsanleitung

Honeywell

Honeywell RAEGuard Lite Bedienungsanleitung

Honeywell

Honeywell SEARCHLINE EXCEL EDGE Bedienungsanleitung

Honeywell

Honeywell BW Technologies Clip Real Time Bedienungsanleitung

Honeywell

Honeywell NOTIFIER VGS Series Bedienungsanleitung

Honeywell

Honeywell Searchpoint Optima Plus Bedienungsanleitung

Honeywell

Honeywell BW GasAlertMicro 5 Bedienungsanleitung

Honeywell

Honeywell BW Technologies GasAlert MicroClip XT Bedienungsanleitung

Honeywell

Honeywell 201T Bedienungsanleitung

Beliebte Gaswarngerät Handbücher anderer Marken

Macurco

Macurco GD-6 Bedienungsanleitung

Evikon

Evikon E2632 Bedienungsanleitung

Critical Environment Technologies

Critical Environment Technologies CGAS-A Series Bedienungsanleitung

MSA

MSA altair 5 Bedienungsanleitung

DOD Technologies

DOD Technologies ChemLogic CL96 Bedienungsanleitung

DEGA

DEGA NS III LCD Series Bedienungsanleitung

RKI Instruments

RKI Instruments 35-3001A-08-01 Bedienungsanleitung

Sygonix

Sygonix 2483186 Bedienungsanleitung

Perry

Perry 1GA 50917MET/P Bedienungsanleitung

isweek

isweek AS8900 Bedienungsanleitung

Oldham

Oldham OLC 10 Bedienungsanleitung

Wizmart

Wizmart NB983 Bedienungsanleitung

Beacon

Beacon MEGA Handbuch

RKI

RKI GX-6000 Bedienungsanleitung

Dräger

Dräger PIR 7000 Bedienungsanleitung

GDS

GDS GASMAX EC Bedienungsanleitung

Seitron

Seitron BE COOL R1 Bedienungsanleitung

MSA

MSA ULTIMA X5000 Bedienungsanleitung