Honeywell HPTV24-E Series Technisches Handbuch

1. Overview

The HPTV24-E series are UL listed; AC video power supply and distribution units that are mounted in a

compact enclosure with eight convenient knockouts for field wiring. They provide a constant source of 24

VAC at 4 amps or 8 amps of total supply current. The HPTV2404-E, HPTV2408-E and HPTV2416-E

include four, eight or sixteen individual fused outputs that route power to operate CCTV cameras and

other video accessories. The HPTV2401-E is a single output power supply with no distribution board

included.

2. Specifications

•UL/cUL Listed Power Supplies

•Four, Eight or Sixteen individually (automotive style) fused 24 VAC outputs.

•AC Power and Individual Output LED Indicators (on select models).

•Built in transient protection.

•LED Indicator Lights:

– Input Power LED (Green) – ON indicates incoming input voltage

– Output Power LEDs (Red) – ON indicates blown output fuse

•Fuses

– Incoming Safety Fuse Blocks 3.15A, 250V

– Load Output Fuses, 5A, 250V

– Secondary Fuse, 3A, 250V (Automotive Style)

•Three conductor AC cord included

•Power ON/OFF disconnect switch.

•Hinged, vented enclosure with seven convenient knockouts.

•Mechanical Dimensions: 9”L x 8”W x 4.5”D (22.86cm x 20.32cm x 8.89cm)

•Operating temperature range: –4°F to +95°F (–20°C to+35°C), indoor use only.

NOTE:

– A readily accessible switched circuit breaker must be available to disconnect mains power as

required.

– Do not expose to rain or moisture.

– Replace fuses with fuses of same type and rating.

– Refer servicing to qualified personnel.

Honeywell Power

Model Number

Output

Voltage

Total Output

Current

Number

outputs

120VAC @ 60Hz

current draw

HPTV2401-E 24VAC 4 amps (100VA) 1 (PTC protected) 0.9 amps

HPTV2404-E 24VAC 4 amps (100VA) 4 fused outputs 0.9 amps

HPTV2408-E 24VAC 4 amps (100VA) 8 fused outputs 0.9 amps

HPTV2416-E 24VAC 8 amps (200VA) 16 fused outputs 1.8 amps

HPTV2401

E, HPTV2404

E, HPTV2408

HPTV2416

UL listed AC Video Power Supplies

PN 113142416: A 1/13/14

Honeywell

12 Clintonville Road

Northford, CT 06472

http://www.honeywellpower.com

3. Installation Instructions

1. Pre-drill holes where Power Supply enclosure is to be mounted.

If the included AC cord is used, mount the enclosure in a secure location where the unit cannot be

accidentally unplugged.

2. Secure the enclosure to the desired location (indoor installation only) as shown in Figure 1.

3. Disconnect power to the branch circuit to which the power supply will be connected.

4. Place on and off switches(s) to the OFF position.

5. Connect incoming AC (120 VAC, 60Hz) into the incoming Fuse block input observing polarities (see

Figure 2). Connect ground leads as shown in Figure 2 and Figure 3.

NOTE: All 115V wiring must be routed so that it cannot touch 24V wiring; minimum spacing is 1/4”

(0.635cm).

6. Connect CCTV cameras (or other external loads) to appropriate terminals (example output 1 = 1P, 1N).

Route all 24V wiring at least 3/8 in. (0.953 cm) from 120V mains wiring (indoor installations only).

7. Power the branch circuit and place SW1 to the ON position. The green LED should illuminate indicating

24V is reaching the PCB.

8. The red LEDs illuminate only if a camera (load) is installed and the fuse is open. Remove a camera

output fuse to verify LED operation.

9. Secure the cabinet cover with metal screws to prevent access by unauthorized personnel.

Figure 3:HPTV2408

E and HPTV2416

(x2)

Figure 2:HPTV2404

WARNING: TO REDUCE THE RISK OF ELCTRIC SHOCK, DO NOT EXPOSE APPLIANCE TO

RAIN OR MOISTURE. RISK OF ELECTRICAL SHOCK AND/OR EQUIPMENT DAMAGE.

DISCONNECT POWER BEFORE SERVICING THIS APPLIANCE.

•For continuous protection against hazard, replace fuses only with exact type and rating.

•A readily accessible switched circuit breaker must be available to disconnect main power as

required.

•All 120V wiring must be routed so that it cannot touch 24V wiring; minimum spacing is 3/8”

(0.953”).

•Installation and servicing should only be made by qualified personnel; contains no user-

serviceable parts.

•Install in accordance with all local regulations and the National Electrical Code.

For additional information:

• Visit our website: http://www.honeywellpower.com

• Contact Technical Support: (877) HPP-POWR

• Email us: hpp_techserv@honeywell.com

Figure 4: HPTV2401-E

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Honeywell Stromversorgung Handbücher

Honeywell

Honeywell Galaxy Power RIO Benutzerhandbuch

Honeywell

Honeywell Gamewell FCI GFPS-9 Bedienungsanleitung

Honeywell

Honeywell 9000311PWRSPLY Bedienungsanleitung

Honeywell

Honeywell HP600ULM Bedienungsanleitung

Honeywell

Honeywell PRO-2200 Bedienungsanleitung

Honeywell

Honeywell PMB-AUX-RTO Technisches Handbuch

Honeywell

Honeywell PS1202A Bedienungsanleitung

Honeywell

Honeywell Fire-Lite FL-PS6 Bedienungsanleitung

Honeywell

Honeywell HP312CX Bedienungsanleitung

Honeywell

Honeywell HP1205UL-4 Technisches Handbuch

Honeywell

Honeywell 900P01 Gebrauchs- und Pflegehandbuch

Honeywell

Honeywell VX89301PWRSPLY Bedienungsanleitung

Honeywell

Honeywell HPR12DC416UL Technisches Handbuch

Honeywell

Honeywell HPTV2416UL Technisches Handbuch

Honeywell

Honeywell HPL624 Technisches Handbuch

Honeywell

Honeywell HP300ULX Technisches Handbuch

Honeywell

Honeywell NOTIFIER FCPS-24S6 Bedienungsanleitung

Honeywell

Honeywell Notifier PSU7A Bedienungsanleitung

Honeywell

Honeywell DCPSU-24 Bedienungsanleitung

Honeywell

Honeywell SILENT KNIGHT SK-PS6 Bedienungsanleitung

Honeywell

Honeywell HP400ULM Technisches Handbuch

Honeywell

Honeywell HP24100WP Technisches Handbuch

Honeywell

Honeywell HPF24S8 Bedienungsanleitung

Honeywell

Honeywell 9007AX01 Bedienungsanleitung

Beliebte Stromversorgung Handbücher anderer Marken

Monacor

Monacor PS-12CCD Bedienungsanleitung

VOLTIMA

VOLTIMA MagicBox 15 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 6032A Bedienungsanleitung

Miller

Miller Auto Deltaweld 452 Bedienungsanleitung

BCP

BCP PUOUBK Merkblatt

HC 2210 Bedienungsanleitung

Puls

Puls CT5.241 Bedienungsanleitung

OCZ

OCZ ZX1250W Bedienungsanleitung

iseg

iseg ECH 238 Bedienungsanleitung

Power

Power XXL A Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies 6631B Bedienungsanleitung

Renogy

Renogy PHOENIX 300 Bedienungsanleitung

HP 6200B Service-Handbuch

Epson

Epson Stylus Scan 2500 Betriebsanleitung

Pulsar

Pulsar GREEN POWER CCTV PoE POE044816 Bedienungsanleitung

Puls

Puls MiniLine ML50.100 Bedienungsanleitung

Puls

Puls AS-Interface SLA4.100 Bedienungsanleitung

Kenwood

Kenwood PS-60 Bedienungsanleitung