Honeywell Granit XP 1990i Bedienungsanleitung

Granit™ XP 1990i

Industrial Area-Imaging Scanner

Quick Start Guide

1990-EN-QS-01 Rev A

5/20

Agency Model: 1990i, 1990iSR, 1990iXR

Note: Refer to your User Guide for information about cleaning

your device.

Get Started

Turn off computer’s power before connecting the scanner, then

power up the computer once the scanner is fully connected.

Power Supply Assembly (if included)

Note: The power supply must be ordered separately, if needed.

Connect the Scanner

When connecting the scanner, make sure the cable is pushed

tightly into the scanner. Loosen the locking plate and slide it

over the base of the cable connector to lock the cable in place.

Tighten the screw.

USB:

IP65/67

Keyboard Wedge:

RS232 Serial Port:

Reading Techniques

The view finder projects an aiming beam that should be cen-

tered over the barcode, but it can be positioned in any direction

for a good read.

Standard Product Defaults

The following barcode resets all standard product default set-

tings.

USB Serial

Scan the following code to program the scanner to emulate a

regular RS232-based COM Port. If you are using a Microsoft®

Windows® PC, you will need to download a driver from the Hon-

eywell website (www.honeywellaidc.com). The driver will use the

next available COM Port number. Apple® Macintosh computers

recognize the scanner as a USB CDC class device and automati-

cally use a class driver.

Note: No extra configuration (e.g., baud rate) is necessary.

SR Models: XR Models:

Standard Product Defaults

USB Serial

USB PC Keyboard

Scan the following code to program the scanner for a USB PC

Keyboard.

Keyboard Country

Scan the appropriate country code below to program the key-

board layout for your country or language. By default, national

character replacements are used for the following characters:

#$@[\]^‘{|}~ Refer to the ISO 646 Character Replacements chart

in your User Guide to view the character replacements for each

country.

USB PC Keyboard

USA (Default)

Belgium

Denmark

Finland

France

Note: For a complete list of country codes, see the User Guide for

your product.

Germany/Austria

Great Britain

Italy

Norway

Spain

Switzerland

Trigger

The following barcodes will allow you to use the scanner in

Manual Trigger - Normal Mode (need to press the trigger to

read) or Presentation mode (the scanner is activated when it

“sees” a barcode).

Streaming Presentation™

When in Streaming Presentation mode, the scanner leaves the

scan illumination on all the time and continuously searches for

barcodes.

Suffix

If you want a carriage return after the barcode, scan the Add CR

Suffix barcode. To add a tab after the barcode, scan the Add Tab

Suffix barcode. Otherwise, scan the Remove Suffix barcode to

remove the suffixes.

Manual Trigger - Normal

(Default)

Presentation Mode

Streaming Presentation Mode

Add CR Suffix

Add Code ID Prefix to all Symbologies

Scan the following barcode if you wish to add a Code ID prefix to

all symbologies at once.

Note: For a complete list of Code IDs, see the User Guide for your

product.

Function Code Transmit

When this selection is enabled and function codes are con-

tained within the scanned data, the scanner transmits the func-

tion code to the terminal. Charts of these function codes are

provided in your User Guide. When the scanner is in keyboard

wedge mode, the scan code is converted to a key code before it

is transmitted.

Add Tab Suffix

Remove Suffix

Add Code ID Prefix To All Symbologies

(Temporary)

Enable

(Default)

Disable

Support

To search our knowledge base for a solution or to log into the

Technical Support portal and report a problem, go to

www.hsmcontactsupport.com.

User Documentation

For the user guide and other documentation, go to

www.honeywellaidc.com.

Limited Warranty

For warranty information, go to www.honeywellaidc.com and

click Resources > Product Warranty.

Patents

For patent information, see www.hsmpats.com.

Disclaimer

Honeywell International Inc. (“HII”) reserves the right to make

changes in specifications and other information contained in

this document without prior notice, and the reader should in all

cases consult HII to determine whether any such changes have

been made. The information in this publication does not repre-

sent a commitment on the part of HII.

HII shall not be liable for technical or editorial errors or omis-

sions contained herein; nor for incidental or consequential

damages resulting from the furnishing, performance, or use of

this material. HII disclaims all responsibility for the selection

and use of software and/or hardware to achieve intended

results.

Inhaltsverzeichnis

Andere Honeywell Scanner Handbücher

Honeywell

Honeywell 3900 Bedienungsanleitung

Honeywell

Honeywell Xenon XP 1950g Bedienungsanleitung

Honeywell

Honeywell Xenon 1500 Bedienungsanleitung

Honeywell

Honeywell MS9535 VoyagerBT Bedienungsanleitung

Honeywell

Honeywell Xenon Ultra 1962 Series Bedienungsanleitung

Honeywell

Honeywell Granit 1280i Bedienungsanleitung

Honeywell

Honeywell Stratos 2700 Bedienungsanleitung

Honeywell

Honeywell N3680 Bedienungsanleitung

Honeywell

Honeywell YOUJIE YJ-HH360 Bedienungsanleitung

Honeywell

Honeywell XENON 1900 Bedienungsanleitung

Honeywell

Honeywell 8680i Series Bedienungsanleitung

Honeywell

Honeywell HF680 Bedienungsanleitung

Honeywell

Honeywell 1602-B Bedienungsanleitung

Honeywell

Honeywell Vuquest 3330 Bedienungsanleitung

Honeywell

Honeywell XP 1991i Bedienungsanleitung

Honeywell

Honeywell 8670 Bedienungsanleitung

Honeywell

Honeywell 7120 Orbit Bedienungsanleitung

Honeywell

Honeywell Voyager XP 1472g Series Bedienungsanleitung

Honeywell

Honeywell Eclipse 90 Bedienungsanleitung

Honeywell

Honeywell Voyager 1602g Bedienungsanleitung

Honeywell

Honeywell 8675i Bedienungsanleitung

Honeywell

Honeywell Xenon 1932 Bedienungsanleitung

Honeywell

Honeywell 4800p Bedienungsanleitung

Honeywell

Honeywell Youjie YJ-HF600 Bedienungsanleitung

Beliebte Scanner Handbücher anderer Marken

Z/I Imaging

Z/I Imaging PhotoScan 2001 Bedienungsanleitung

Renkforce

Renkforce DS100-5M Bedienungsanleitung

Image Access

Image Access WideTEK A2 Bedienungsanleitung

Canon

Canon imageFORMULA CR-120N Bedienungsanleitung

Fujitsu

Fujitsu FI-4860C2 Bedienungsanleitung

GeoSlam

GeoSlam ZEB Horizon Montageanleitung

Kodak

Kodak i5800 Scanner Bedienungsanleitung

Kodak

Kodak i7300 Bedienungsanleitung

Revopoint

Revopoint POP Bedienungsanleitung

Fujitsu

Fujitsu fi-4860C Bedienungsanleitung

Eddyfi Technologies

Eddyfi Technologies Floormap X Bedienungsanleitung

Faselase

Faselase F6 Bedienungsanleitung

Fujitsu

Fujitsu CardMinder Bedienungsanleitung

Uniden

Uniden BC340CRS Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Bedienungsanleitung

Mustek

Mustek PageExpress 4800 Pro Bedienungsanleitung

Optex

Optex 750830 Bedienungsanleitung

Innova

Innova 5210 Bedienungsanleitung