Honeywell Xenon 1902HC Bedienungsanleitung

Xenon™ 1902HC

Cordless Area-Imaging Scanner for Healthcare

Quick Start Guide

Crdlss-HC-QS Rev A

12/14

Aller à www.honeywellaidc.com pour le français.

Vai a www.honeywellaidc.com per l'italiano.

Gehe zu www.honeywellaidc.com für Deutsch.

Ir a www.honeywellaidc.com para español.

Para Português, acesse www.honeywellaidc.com.br.

Перейти на русскоязычный сайт www.honeywellaidc.com.

Pro češtinu jdi na www.honeywellaidc.com.

Pre slovenčinu choďna www.honeywellaidc.com

日本語 : www.honeywellaidc.com をご覧ください。

如要到中国 www.honeywellaidc.com（简体）。

查看繁体版请登陆 www.honeywellaidc.com

한글 www.honeywellaidc.com 로이동합니다 .

http://manualforhoneywellthermostat.com

Note: Refer to your user’s guide for information about cleaning your

device.

For localized language versions of this document, go to

www.honeywellaidc.com.

Getting Started

Turn off the computer’s power before connecting the base, then

power up the computer once the base is fully connected. When the

base is connected and powered up, put the scanner in the base to

establish a link. The green LED on the base flashes to indicate the

scanner’s battery is charging.

Power Supply Assembly (if included)

Note: The power supply must be ordered separately, if needed.

http://manualforhoneywellthermostat.com

Connecting the Scanner

USB:

Keyboard Wedge:

http://manualforhoneywellthermostat.com

RS232 Serial Port:

Reading Techniques

The view finder projects an aiming

beam that should be centered over

the bar code, but it can be

positioned in any direction for a

good read.

Hold the scanner over the bar code,

pull the trigger, and center the

aiming beam on the bar code.

The aiming beam is smaller when

the scanner is closer to the code and larger when it is farther from the

code. Hold the scanner close to smaller bar codes, and farther away

from large bar codes to get a proper read.

If the bar code is highly reflective (e.g., laminated), you may need to

tilt the scanner at an angle so the bar code can be scanned.

Note: If the scanner beeps 3 times when scanning a bar code, the

link has not been established. If the scanner beeps once, the

link has been established.

Standard Product Defaults

The following bar code resets all standard product default settings.

Standard Product Defaults

USB Serial

Scan the following code to program the scanner to emulate a regular

RS232-based COM Port. If you are using a Microsoft® Windows®

PC, you will need to download a driver from the Honeywell website

(www.honeywellaidc.com). The driver will use the next available

COM Port number. Apple® Macintosh computers recognize the

scanner as a USB CDC class device and automatically use a class

driver.

USB Serial

Note: No extra configuration (e.g., baud rate) is necessary.

USB PC Keyboard

Scan the following code to program the scanner for a USB PC

Keyboard.

USB PC Keyboard

Epic

Scan the following bar code to configure your device to communicate

with an Epic software application.

EMR Application

After scanning this code, you must put the scanner into the base or

scan the linking bar code on the base or Access Point to relink your

scanner.

Meditech®

Scan the following bar code to configure your device to communicate

with a Meditech software application.

Meditech Application

After scanning this code, you must put the scanner into the base or

scan the linking bar code on the base or Access Point to relink your

scanner.

Quiet Operations

The following codes configure the scanner and base to quiet modes

for scanning that does not disturb resting patients.

Silent Mode with Flashing LED

Scan the following bar code to completely silence the base and

scanner. When a bar code is scanned, the LED and aimer flash 5

times. Green indicates a good scan, red indicates a bad scan.

Silent Mode with Flashing LED

Silent Mode with Long LED

Scan the following bar code to completely silence the base and

scanner. When a bar code is scanned, the LED and aimer remain

solidly lit for 1 second. Green indicates a good scan, red indicates a

bad scan.

Silent Mode with Long LED

Very Low Beeper (Nighttime Mode)

The following bar code silences the base, and sets the scanner for a

very low beep when reading bar codes. After scanning this code, the

base beep, base and scanner power up beep, and scanner linking

sounds are all silenced. When a bar code is scanned, the scanner

emits a very soft beep.

Nighttime Mode

Low Beeper (Daytime Mode)

Scan the following bar code to set all sounds to on, but at a low

volume. The scanner beep, base beep, base and scanner power up

beep, and scanner linking sounds are all set to low volume.

Daytime Mode

Page Button

The page button on the base is used to page your scanner or to put

it into Temporary Streaming Presentation mode. When the scanner

is out of the base, press the page button once to make the scanner

beep so you can locate it. Press the scanner’s trigger to stop the

page beeping. When the scanner is in the base, press the page

button once and the scanner shines the aimer until a bar code is

presented to it. If the scanner doesn’t see a bar code in 10 seconds,

the aimer shuts off.

Suffix

If you want a carriage return after the bar code, scan the Add CR

Suffix bar code. To add a tab after the bar code, scan the Add Tab

Suffix bar code. Otherwise, scan the Remove Suffix bar code to

remove the suffixes.

Add CR Suffix

Remove Suffix

Add Tab Suffix

Add Code ID Prefix to all Symbologies

Scan the following bar code if you wish to add a Code ID prefix to all

symbologies at once.

Add Code ID Prefix To All Symbologies

(Temporary)

Note: For a complete list of Code IDs, see the User’s Guide for your

product at our website, www.honeywellaidc.com.

Inhaltsverzeichnis

Andere Honeywell Scanner Handbücher

Honeywell

Honeywell HF680 Bedienungsanleitung

Honeywell

Honeywell Intermec SF61B-A Bedienungsanleitung

Honeywell

Honeywell Voyager 1400g Series Bedienungsanleitung

Honeywell

Honeywell 8675i Bedienungsanleitung

Honeywell

Honeywell MS4980 Bedienungsanleitung

Honeywell

Honeywell Voyager XP 1472g Series Bedienungsanleitung

Honeywell

Honeywell Voyager XP 1470g Series Bedienungsanleitung

Honeywell

Honeywell HF680 Bedienungsanleitung

Honeywell

Honeywell Eclipse MS5100 Series Bedienungsanleitung

Honeywell

Honeywell IS4920 Bedienungsanleitung

Honeywell

Honeywell XP 1991i Bedienungsanleitung

Honeywell

Honeywell Voyager 147 Series Bedienungsanleitung

Honeywell

Honeywell Vuquest 3330g Bedienungsanleitung

Honeywell

Honeywell Xenon 1902h Bedienungsanleitung

Honeywell

Honeywell XP 1991i Bedienungsanleitung

Honeywell

Honeywell OrbitCG MS7180 Bedienungsanleitung

Honeywell

Honeywell VOYAGER 1250G Bedienungsanleitung

Honeywell

Honeywell Xenon Series Bedienungsanleitung

Honeywell

Honeywell 8680i Series Bedienungsanleitung

Honeywell

Honeywell StratosH MS2321 Bedienungsanleitung

Honeywell

Honeywell HH450 Bedienungsanleitung

Honeywell

Honeywell Granit 1910i Bedienungsanleitung

Honeywell

Honeywell Voyager XP 1470g Series Bedienungsanleitung

Honeywell

Honeywell HF680 Bedienungsanleitung

Beliebte Scanner Handbücher anderer Marken

Z/I Imaging

Z/I Imaging PhotoScan 2001 Bedienungsanleitung

Renkforce

Renkforce DS100-5M Bedienungsanleitung

Image Access

Image Access WideTEK A2 Bedienungsanleitung

Canon

Canon imageFORMULA CR-120N Bedienungsanleitung

Fujitsu

Fujitsu FI-4860C2 Bedienungsanleitung

GeoSlam

GeoSlam ZEB Horizon Montageanleitung

Kodak

Kodak i5800 Scanner Bedienungsanleitung

Kodak

Kodak i7300 Bedienungsanleitung

Revopoint

Revopoint POP Bedienungsanleitung

Fujitsu

Fujitsu fi-4860C Bedienungsanleitung

Eddyfi Technologies

Eddyfi Technologies Floormap X Bedienungsanleitung

Faselase

Faselase F6 Bedienungsanleitung

Fujitsu

Fujitsu CardMinder Bedienungsanleitung

Uniden

Uniden BC340CRS Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Bedienungsanleitung

Mustek

Mustek PageExpress 4800 Pro Bedienungsanleitung

Optex

Optex 750830 Bedienungsanleitung

Innova

Innova 5210 Bedienungsanleitung