Honeywell Lynx Touch L5100 Bedienungsanleitung

Lynx Touch – L5100

Technical Training

WiFi Setup

2 HONEYWELL - CONFIDENTIAL File Number

WiFi General Information

•Is compatible with the New Honeywell WAP-PLUS

-Does not work with the Honeywell WAP (initially)

•Does not work with the Sercom router sold under

Honeywell brand through ADI (Sercom has a work

around/fix)

•Does not support WPS (initially)

•Does not work with a router which does not transmit its

SSID (the router must transmit SSID)

3 HONEYWELL - CONFIDENTIAL File Number

Wi-Fi Router Compatibility Chart

•Some routers may not work in the initial release, a list of

routers supported will be part of release 1

communications

-Cisco E1500

-Netgear WNR2000 v3

-Dlink DIR-815

-Buffalo WHR-HP-GN (Amp using this one)

•Wi-Fi Certification

-Running change 3Q2012

•Recommended Encryption

-WPA2

4 HONEYWELL - CONFIDENTIAL File Number

Advanced Protection Logic

1. System armed 2. Entry delay starts 3. Signal sent to AlarmNet

4. If System is disarmed

within entry time, no signal is

sent to central station

5. Central Station Dispatches

Superior Implementation With APL

4. If System is Not disarmed

within entry time AlarmNet

sends signal to central station

5 HONEYWELL - CONFIDENTIAL File Number

WiFi Alarm Reporting

•After 1 hour of AC loss, the WiFi module shuts down to

preserve battery.

•Reports may take up to 60 seconds to report, even if

GSM is used as back up (60 seconds is the time for

WiFi to wake up, scan for networks, acquire an iP

address).

-Smash and grab will still work, just will take extra 60 seconds to

report. Smash and grab will not have an increased level of false

alarms due to the power save feature

•If router is down, for whatever reason, reports then go

over GSM but may not be until >60 seconds later (as the

Wi-Fi path is tried 1st)

6 HONEYWELL - CONFIDENTIAL File Number

WiFi Alarm Reporting (Cont.)

•If there is a smash and grab event, the WiFi module will

respond to the increased supervision, thus not creating

the new APL possible trouble alarm

•Entry delay and/or dial delay may add additional time to

the alarm report time (unless the WiFi wakes up after

event, rather than when the alarm needs to report out)

•While you get TC basic free with WiFi / ip, it will not work

during a power outage, even if GSM is the back up

(after the 1 hour as the WiFi module is asleep)

7 HONEYWELL - CONFIDENTIAL File Number

WiFi Setup

•WiFi Module Installed Speaker Side

-Power System Down Before Installation

-Must be mounted on the speaker side

8 HONEYWELL - CONFIDENTIAL File Number

WiFi Setup

•WiFi Network Connection

-Setup by Installer

-Reconfigured by Master

Installer Programming

•Communicator

-Select Communication Path

WiFi

WiFi & GSM

•Advanced Protection Logic

-Must Use AlarmNet Device as

Primary Communicator

IP

GSM

WiFi

WiFi & GSM GSM Fault time is defaulted to 60

minutes and can not be changed.

9 HONEYWELL - CONFIDENTIAL File Number

WiFi Setup

Installer Programming

•Communicator

Diagnostics

-Select Configure WiFi

•Scan Access Points

-Broadcasting Networks

•Manual Configure

-Non-Broadcasting Networks*

-Pre-Configuring

-Feature currently not

working

•NOTE:

-If the SSID is not

broadcasted, the WiFi will not

connect

10 HONEYWELL - CONFIDENTIAL File Number

WiFi Setup

Scan Access Points

•Touch Scan to Re-Scan

•Select Network and Touch

Edit to Configure and Join.

•Toggle Field Values by

Touching Each Field.

-Security, Infrastructure &

DHCP will be Detected

Automatically

•Touch Key to Enter

Network Passphrase or

Key

Andere Handbücher für Lynx Touch L5100

Inhaltsverzeichnis

Andere Honeywell Sicherheitssystem Handbücher

Honeywell

Honeywell LYNX Touch L7000 Series Bedienungsanleitung

Honeywell

Honeywell Lynx Plus Series Montageanleitung

Honeywell

Honeywell LYNX Touch 5100 Betriebsanleitung

Honeywell

Honeywell HS-6270 Bedienungsanleitung

Honeywell

Honeywell Lyric Bedienungsanleitung

Honeywell

Honeywell Lynx Plus Series Bedienungsanleitung

Honeywell

Honeywell NETAXS NX4L1 Bedienungsanleitung

Honeywell

Honeywell Optiflex Interactive Bedienungsanleitung

Honeywell

Honeywell 4219 Bedienungsanleitung

Honeywell

Honeywell LYNX Bedienungsanleitung

Honeywell

Honeywell ADEMCO VISTA-10P Montageanleitung

Honeywell

Honeywell 2202 Bedienungsanleitung

Honeywell

Honeywell VISTA-128BPTSIA Bedienungsanleitung

Honeywell

Honeywell ESSER TAM Bedienungsanleitung

Honeywell

Honeywell L5200 Series Betriebsanleitung

Honeywell

Honeywell Domonial Bedienungsanleitung

Honeywell

Honeywell LYNX Touch Series Montageanleitung

Honeywell

Honeywell System 1500e Bedienungsanleitung

Honeywell

Honeywell FIRE-LITE ALARMS BG-12LR Bedienungsanleitung

Honeywell

Honeywell GENT Nano panel-based Schulungshandbuch

Honeywell

Honeywell LYNX Touch L5210 Series Installationshandbuch

Honeywell

Honeywell ADEMCO LYNXR-I Security System Bedienungsanleitung

Honeywell

Honeywell L5200 Series Bedienungsanleitung

Honeywell

Honeywell LYNX Touch Series Montageanleitung

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

CADDX

CADDX NX-6 Bedienungsanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

Blaupunkt

Blaupunkt SA 2700 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Highway Safety Group

Highway Safety Group EA401 Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung