Honeywell Honeywell Thermostat PRO TH3000 Series Bedienungsanleitung

This martua| covers the following modets:

TH3110D: For 1Heat/1 Cool systems

TN3210D: For 2 Heat/1 Cool heat pump systems only

(Pull thermostat from wallplate and turn over to find model number.)

CAUTION: EQUIPMENT DAMAGE HAZARD,

To prevent possible compressor damage, do not operate cooling system when outdoor

temperature is below 50°F (10°C).

For assistance with this product please Visithttp://yourhemeLhoneyweH.eom

oroa! IHoneywel! Customer Care toil-free at 1_800.468_1502

Read and save these instructions,

® U.S. Registered Tredemark. Patents pending.

PRO TH3110D / TH3210D

About your new thermostat

Thermostat features ................................... 2

Quick reference to controls ....................... 3

Quick reference to display ........................ 4

Thermostat Operation

System switch (Heat/Cool) ........................ 5

Fan switch (Auto/On) ................................. 6

Temperature controls ................................. 7

Compressor protection .............................. 8

Appendices

Battery replacement .................................. 9

In case of difficulty ................................... 10

Customer assistance ............................... 12

Accessories .............................................. 12

5-year limited warranty ............................ 13

Operating Manual

Your new Honeywell thermostat has been designed to give you many years of reliable

service and easy-to-use, push-button climate control.

Features

• Large, clear, bacMit display is easy to read, even in the dark.

Displays both room temperature and temperature setting.

Built-in compressor protection.

PRO TH3110D / TH3210D

- i

Digita| display screen Temperature adjustment

page 7)

Fan Switch (see page 6)

On: Fan runs continuously.

Auto: Fan runs only when heating or

cooling system is on,

System switch (see page 5)

oCool: Cooling system control.

•Off; All systems off,

•Heat: Heating system control,

•IEm Heat =Emergency & Auxiliary

Heat control. Compressor is locked

out, (Select models only,)

Operating Manual

Current inside temperature Temperature setting

Low battery warning

(see page 9)

System Status

•Cool On: Cooling system is on.

• Heat On: Heating system is on.

•Ern: Emergency heat is on. **

•Aux: Auxiliary heat is on. **

** Only for heat pumps with this capability

(select models only).

tf "Heat On" or "Cool

On" is flashing, com-

pressor protection is

engaged (see page 8).

PRO TH3110D / TH3210D

The SYSTEM switch can be set to control

your heating or cooling system, depending

on the season.

Coop Cooling system control.

• Off: All systems are off.

• Heat: Heating system control.

• IEm Heat" Emergency & Auxiliary Heat

control. Compressor is locked out.

(Select models only.)

Set SYSTEMswitch to control the

heating or cooling system. CAUTION: EQUIPMENT DAMAGE HAZARD,

Do not operate cooling system when outdoor

temperature is below 50°F (10°C).

Operating Manual

r'1

Set the FAN switch to Auto or On.

In "Auto" mode (the most commonly used

setting), the fan runs only when the heat-

ing or cooling system is on.

If set to "On," the fan runs continuously.

Use this setting for improved air circula-

tion, or for more efficient air cleaning.

Set FAN switch to choose whether the fan

runs continuously or only as needed.

PRO TH3110D / TH3210D

Press the temperature adjustment

buttons until the temperature you want

is displayed in the upper right portion of

the screen.

Note: Make sure the SYSTEMswitch is set

to the system you want to control (Heat or

Cool),

temperature, adjustment buttons.

Operating Manual

i !

Message flashes

time has elapsed.

This feature helps prevent damage to the

compressor in your air conditioning or heat

pump system.

Damage can occur if the compressor is

restarted too soon after shutdown. This fea-

ture forces the compressor to wait 5 minutes

before restarting.

During the wait time, the display will flash

the message Cool On (or Heat On if you have

a heat pump). When the safe wait time has

elapsed, the message stops flashing and the

compressor turns on.

Andere Handbücher für Honeywell Thermostat PRO TH3000 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Honeywell Thermostat Handbücher

Honeywell

Honeywell DTC 100/4 TD Bedienungsanleitung

Honeywell

Honeywell RTH8500 Series Bedienungsanleitung

Honeywell

Honeywell CT30 Series Bedienungsanleitung

Honeywell

Honeywell TL8130A Bedienungsanleitung

Honeywell

Honeywell T7300E Series Bedienungsanleitung

Honeywell

Honeywell T7200D Bedienungsanleitung

Honeywell

Honeywell Lyric T6 Pro Wi-Fi Bedienungsanleitung

Honeywell

Honeywell CT8602 Bedienungsanleitung

Honeywell

Honeywell T7351 Betriebsanleitung

Honeywell

Honeywell RTH2300 series Bedienungsanleitung

Honeywell

Honeywell Prestige THX9321R01 Bedienungsanleitung

Honeywell

Honeywell E529.RF Bedienungsanleitung

Honeywell

Honeywell T8700A1009 Systemhandbuch

Honeywell

Honeywell THX9000 Prestige HD Benutzerhandbuch

Honeywell

Honeywell Round CT87B Montageanleitung

Honeywell

Honeywell Super Tradeline T874R Bedienungsanleitung

Honeywell

Honeywell RTH6500WF Wi-Fi Series Bedienungsanleitung

Honeywell

Honeywell L41.. Bedienungsanleitung

Honeywell

Honeywell PRO TH2000DV Series Bedienungsanleitung

Honeywell

Honeywell MagicStat 28 Bedienungsanleitung

Honeywell

Honeywell XE70 Series Bedienungsanleitung

Honeywell

Honeywell INNCOM e7 Bedienungsanleitung

Honeywell

Honeywell t8034c Bedienungsanleitung

Honeywell

Honeywell INTELLIGUARD 9000 Bedienungsanleitung

Beliebte Thermostat Handbücher anderer Marken

EWELLY

EWELLY EW-181 Bedienungsanleitung

Prolon

Prolon T1100 Montageanleitung

Computherm

Computherm Q20 Bedienungsanleitung

Heatmiser

Heatmiser neoStat Bedienungsanleitung

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung

Saswell

Saswell SAS920XWHB-7-S-RF Leitfaden

Aircalo

Aircalo TFP1-ET85P2 Bedienungsanleitung

Carrier

Carrier DEBONAIR 33CS Bedienungsanleitung

Lennox

Lennox iHarmony Zone Thermostat Montageanleitung

Gemtech

Gemtech GT7000 Bedienungsanleitung

Rollei

Rollei Smartes 45000 Bedienungsanleitung

Sinope

Sinope TH1300RF Bedienungsanleitung

NuTone

NuTone NTBZ48 Original Betriebsanleitung

Stelpro

Stelpro MAESTRO ASMT402AD Bedienungsanleitung

Aube Technologies

Aube Technologies TH305 Bedienungsanleitung

Powtier Controls

Powtier Controls 505MST Bedienungsanleitung

Kanmor

Kanmor Zone Control 369e Bedienungsanleitung

MICROclimate International

MICROclimate International B2 Magic Eye Bedienungsanleitung