Honeywell RTHL3550 Bedienungsanleitung

Owner’s Manual

Read and save these

instructions.

For help please visit

yourhome.honeywell.com

RTHL3550

Non-Programmable

Digital Thermostat

Installation is Easy

1. Label wires and remove your old thermostat

2. Install and wire your new thermostat

3. Set your new thermostat to match your heating/cooling system

• It is preset for the most common system

Do you need assistance? We are here to help.

Call 1-800-468-1502 for wiring assistance before returning

the thermostat to the store.

This thermostat works on 24 volt or 750 mV systems. It

will NOT work on 120/240 Volt systems.

NOTICE: To avoid possible compressor damage, do not run air

conditioner if the outside temperature drops below 50°F (10°C).

ATTENTION: MERCURY RECYCLING NOTICE

This product does not contain mercury. However,

this product may replace a product that contains

mercury. Mercury and products containing

mercury should not be discarded in household

trash.

For more information on how and where to

properly recycle a thermostat containing

mercury in the United States, please refer to the

Thermostat Recycling Corporation at

www.thermostat-recycle.org.

For mercury thermostat recycling in Canada,

please refer to Switch the Stat at

www.switchthestat.ca

NO MERCUR

NO BOTE

MERCURIO

MCR32585

Customer assistance

For assistance with this product, please visit

http://yourhome.honeywell.com.

Or call Honeywell Customer Care toll-free at

1-800-468-1502.

To save time, please note your model number

and date code before calling.

Remove battery holder; model number is on

the battery holder.

® U.S. Registered Trademark. Patents pending.

US Patent No. D542,677; 7,832,652; 7,641,126 and other patents pending.

Installation

Installation............................................3

Advanced Installation.........................10

About your new thermostat

Controls and Home screen

quick reference...................................12

Compressor protection.......................14

Replace batteries ...............................14

Appendices

Troubleshooting..................................15

Limited warranty.................................16

Table of contents

1 Turn Off Power to Heating/Cooling System

M31535

Circuit breaker

box Heating/cooling system

power switch

2 Remove Old Thermostat

Remove old thermostat but leave wallplate with wires attached.

Do not remove wallplate yet

MCR33823

Terminal

designation

If you have an older thermostat with a

sealed mercury tube, turn to page 2

for proper disposal instructions.

3 Label Wires with Tags

Label the wires using the supplied wire labels as you disconnect them.

M28100

4 Separate Wallplate from New Thermostat

Remove wallplate from the new thermostat and mount onto wall.

M28343

Wallplate

Wire Labels

Terminal designation

MCR31537

5 Mount Wallplate

Mount the new wallplate using the included screws and anchors.

Drill 3/16-in. holes for drywall

Drill 3/32-in. holes for plaster

M28345

Remove metal

jumper if you

have both Rand

Rc wires.

MCR31270A

W2 G

RcY2

We are here to help. Call 1-800-468-1502 for wiring assistance.

6 Connect Wires

Simply match wire labels.

If labels do not match letters on the thermostat, check “Alternate Wiring

(Conventional Systems)” on page 6 and connect to terminal as shown (see

notes, below).

If wires will be connected to both Rand Rc terminals, remove metal

jumper.

Do not use C, X or B. Wrap bare end of wire with electrical tape.

If Eand Aux do not each have a wire connected, use a small piece of wire to

connect them to each other.

MCR31274B

Y2C

Y2 W2 GW YR

RHY1

RYW

Wiring—Heat Pump

MCR31276A

Aux

O/BLG

Aux

Alternate Wiring (Conventional Systems)

If labels do not match terminals, connect wires as shown here (see notes,

below).

Alternate Wiring (Heat Pump Only)

Leave metal jumper in place, connecting Rand Rc terminals.

If your old thermostat had both Vand VR wires, stop now and contact a

qualified contractor for help.

If your old thermostat had separate Oand Bwires, wrap the Bwire in

electrical tape and do not connect.

If your old thermostat had Y1, W1 and W2 wires, stop now and contact a

qualified contractor for help.

If there were seperate wires on Eand Aux, place both wires in the Aux/E

terminal.

If labels do not match letters on the thermostat, check the chart below and

connect to terminal as shown here (see notes, below).

MCR31275B

AUX

XWFH

LOG

VRM

VY1

RcG O/B

Aux

M28346

Back of thermostat

7 Install Batteries

Install two AA alkaline batteries.

8 Install Thermostat

onto Wallplate

Install thermostat onto the wallplate

on the wall.

MCR32613

M31544

Circuit breaker box Heating/cooling system

power switch

9 Turn Power Back On

Turn the power back on to the

heating/cooling system.

10 If your system type is...

If your system type is:

qSingle Stage Heat and Cool

Congratulations, you’re done!

If your system type is:

qMultistage Heat and Cool

qHeat Pump* without Backup Heat

qHeat Pump* with Backup Heat

qHeat Only

qCool Only

Continue with Advanced Installation to match your thermostat to your system

type.

*Heat Pump—an air conditioner that provides cooling in the summer, and also

runs in reverse in the winter to provide heating.

If you are not sure of your system type or if you have other

questions, call us toll-free at 1-800-468-1502.

This thermostat works on 24 volt or 750 mV systems. It will NOT work on

120/240 Volt systems.

Function

Description

Press the sor tbutton to Setting

1 select the type of system you

have in your home

0 Heating & cooling: Gas, oil or electric heating with

central air conditioning.

1 Heat pump: Outside compressor provides both heating

and cooling without backup or auxiliary heat.

2 Heating only: Gas, oil or electric heating without central

air conditioning.

3 Heating only with fan: Gas, oil or electric heating

without central air conditioning. (Use this setting if you

could turn the fan on and off with a fan switch on your

old thermostat.)

4 Cool only: Central air conditioning only.

5 Heat pump: Outside compressor provides both heating

and cooling with backup or auxiliary heating.

6 Heat/Cool Multiple Stages: Two heat stages (wires on

W and W2), two cooling stages (wires on Y and Y2).

7 Heat/Cool Multiple Stages: Two heat stages (wires on

W and W2), one cooling stage (wire on Y).

8 Heat/Cool Multiple Stages: One heat stage (wire on

W), two cooling stages (wires on Y and Y2).

2 select whether your

changeover valve is used in

heating or cooling

0 Cooling changeover valve: Use this setting if you

connected a wire labeled “O” to the O/B W wire terminal.

1 Heating changeover valve: Use this setting if you

connected a wire labeled “B” to the O/B W wire terminal.

MCR3337

Function Setting

MCR32600

Done Next

Advanced Installation

Enter System Setup

To enter system setup, press and hold

both the sand FAN buttons until the

display changes (approximately 5

seconds).

Changing Settings

1. Press the sor tbutton to change

the setting.

2. Press NEXT to advance to the next

function.

3. Press DONE to exit and save settings.

Andere Handbücher für RTHL3550

Inhaltsverzeichnis

Sprachen:

Andere Honeywell Thermostat Handbücher

Honeywell

Honeywell T8611G Chmnothern IV Bedienungsanleitung

Honeywell

Honeywell TH115-AF-GB Bedienungsanleitung

Honeywell

Honeywell Y9120W Sundial RF2 Pack 4 Bedienungsanleitung

Honeywell

Honeywell TRUEZONE HZ322 Bedienungsanleitung

Honeywell

Honeywell TROLATEMP T8601C Chronotherm Bedienungsanleitung

Honeywell

Honeywell CT2800 Technische Daten

Honeywell

Honeywell TRADELINE T8400C Bedienungsanleitung

Honeywell

Honeywell RTH7600 Series Bedienungsanleitung

Honeywell

Honeywell PRESTIGE THX9321 Bedienungsanleitung

Honeywell

Honeywell rth230b Bedienungsanleitung

Honeywell

Honeywell XE70 Series Bedienungsanleitung

Honeywell

Honeywell RTH7400 series Bedienungsanleitung

Honeywell

Honeywell WebStat T7350 Bedienungsanleitung

Honeywell

Honeywell INTELLIGUARD 9000 Bedienungsanleitung

Honeywell

Honeywell RTH9580 Wi-Fi Bedienungsanleitung

Honeywell

Honeywell CM507A Bedienungsanleitung

Honeywell

Honeywell FocusPRO TH5220D Bedienungsanleitung

Honeywell

Honeywell Wi-Fi VisionPRO 8000 series Bedienungsanleitung

Honeywell

Honeywell RTH7400 series Bedienungsanleitung

Honeywell

Honeywell UtilityPRO Series Bedienungsanleitung

Honeywell

Honeywell CT50 Bedienungsanleitung

Honeywell

Honeywell RTH7600 Series Bedienungsanleitung

Honeywell

Honeywell TB7100A1000 - MultiPro Commercial Thermostat Bedienungsanleitung

Honeywell

Honeywell ST9400A Bedienungsanleitung

Beliebte Thermostat Handbücher anderer Marken

EWELLY

EWELLY EW-181 Bedienungsanleitung

Prolon

Prolon T1100 Montageanleitung

Computherm

Computherm Q20 Bedienungsanleitung

Heatmiser

Heatmiser neoStat Bedienungsanleitung

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung

Saswell

Saswell SAS920XWHB-7-S-RF Leitfaden

Aircalo

Aircalo TFP1-ET85P2 Bedienungsanleitung

Carrier

Carrier DEBONAIR 33CS Bedienungsanleitung

Lennox

Lennox iHarmony Zone Thermostat Montageanleitung

Gemtech

Gemtech GT7000 Bedienungsanleitung

Rollei

Rollei Smartes 45000 Bedienungsanleitung

Sinope

Sinope TH1300RF Bedienungsanleitung

NuTone

NuTone NTBZ48 Original Betriebsanleitung

Stelpro

Stelpro MAESTRO ASMT402AD Bedienungsanleitung

Aube Technologies

Aube Technologies TH305 Bedienungsanleitung

Powtier Controls

Powtier Controls 505MST Bedienungsanleitung

Kanmor

Kanmor Zone Control 369e Bedienungsanleitung

MICROclimate International

MICROclimate International B2 Magic Eye Bedienungsanleitung