Hoover CH86000 Bedienungsanleitung

The contents of this manual are based on the latest

productinformationavailableatthetimeofpublication.

Hoover, Inc. reserves the right to make changes or im-

provements to its machines without notice.

FORYOURCONVENIENCE,RECORD THE

FOLLOWINGIMPORTANTINFORMATION:

MODEL

SERIALNUMBER

PARTNUMBER

DATEPURCHASED

WIDE AREA VACUUM

PARTS MANUAL

OPERATING & MAINTENANCE

INTRODUCTION INSTRUCTIONS

READTHISBOOK

This operator’s book has important information for the

useandsafeoperation ofthismachine. Readthisbook

carefully before starting the machine. Keep this book

and tell all operators to read the book. If you do not

followtheinstructions,youcancauseaninjury or dam-

ageequipment,furnitureorbuildings.

For new books write to:

Hoover,Inc.

7500CochranRoad

Glenwillow,OH 44139

ForService: (888)321-1134ext.2554

Carefullyinspectallcomponentstoensure that there is

no concealed freight damage. If such damage is dis-

covered,filea“CONCEALEDDAMAGEREPORT” im-

mediatelywiththedeliveringcarrier.

IMPORTANTSAFETYINSTRUCTIONS

READ AND UNDERSTAND ALL WARNINGS AND INSTRUCTIONS IN THIS BOOK BEFORE

USING THIS MACHINE! Ifyoudonotunderstand,askyoursupervisor.

WARNING: To reduce the risk of fire, electric shock, or injury:

1. DONOTUSETHISVACUUM FOR PICKUPOFWETDEBRIS.

2. Donotuse outdoors or on wet surfaces.

3. Donotallow to be used as atoy. Closeattentionis necessary when used by ornearchildren.

4. Youmust be trainedtooperatethismachine. Operatethismachineforitsintendeduseonly.

5. Donot operate thismachineunlessitiscompletely assembled. The dustbagand/orfiltersmust

beinplace. Useonlymanufacturer’sattachments.

6. Keepthe machineanditselectricalcomponentsdry. Do notsubjecttorain.Storethemachine in

adrybuildingarea. Cleanthemachinewithadryclothonly.

7. Machines can cause an explosion when near flammable materials and vapors. Do not use or

storethismachinewithornearfuels,graindust,solvents,thinners,orotherflammablematerials.

Donotuseflammablestocleanthismachine.

8. Donotpickup anything that is burning or smoking, such as cigarettes,matchesorhotashes.

9. Maintenanceandrepairsmustbedonebya qualified or authorized service center.

10.Ifthemachine isnotworkingas itshould,hasbeendropped, damaged,leftoutdoors,or dropped

intowater,returnittoaservicecenter.

11. Connecttoaproperlygrounded outlet only(SeeGroundingInstructions).

12.Toprevent electric shock, always remove the electrical plug from the electrical outletbeforedo-

inganyrepairsormaintenanceandwhenleavingthemachineunattended. Donothandleplugor

vacuumwithwethands.

13.Donotpullcord,usecordasahandle,closeadooroncord,orpullcordaroundsharpedgesor

corners. Keepcord away from heatedsurfaces. Donot use with damagedcord or plug.

14.Turn offall controlsbeforeunplugging.

15.Do not put objects into openings. Do not use with any opening blocked: keep free of dust, lint,

hairandanythingthat may reduceairflow.

16.Keephair,looseclothing, fingersandallparts ofthebodyaway fromopeningsandmovingparts.

17.Make sure all labels, decals, warnings, cautions and instructions are fastened to the machine.

This machine must be grounded. If it should malfunction or break

down, grounding provides a path of least resistance for electric

currenttoreduce the risk of electricshock. Thismachineisequipped

with a cord having an equipment-grounding conductor and ground-

ing plug. The plug must be inserted into an appropriate outlet that

is properly installed and grounded in accordance with all local

codes and ordinances.

WARNING - Improper connection of the equipment-grounding con-

ductor can result in a risk of electric shock. Check with a qualified

electrician or service person if you are in doubt as to whether the

outlet is properly grounded. Do not modify the plug provided with

the machine - if it will not fit the outlet, have a proper outlet installed

by a qualified electrician.

This machine is for use on a nominal 120-volt circuit, and has a

grounded plug that looks like the plug illustrated in figure A. A

temporary adapter that looks like the adapter illustrated in figures B

and C may be used to connect this plug to a 2-pole receptacle as

shown in figure B if a properly grounded outlet is not available.

The temporary adapter should be used only until a properly

grounded outlet (figure A) can be installed by a qualified electri-

cian. The green colored rigid ear, lug, or the like extending from the

adapter must be connected to a permanent ground such as a

properly grounded outlet box cover. Whenever the adapter is

used, it must be held in place by a metal screw.

NOTE: In Canada, the use of a temporary adapter is not permitted

by the Canadian Electrical Code

EXTENSIONCORDS

Use only three-wire 14/3 or larger gauge approved extension

cords that have three-prong grounding type plugs and three-pole

receptacles that accept the appliance’s plug. Replace or repair

any damaged cords or plugs.

When servicing, refer to authorized person only. Use only identi-

cal replacement parts.

GroundingInstructions

NOTE: Do not use adapters shown in figures B & C in Canada

Vacuum

Motor

Vacuum

Motor

Brush

Motor

Cord Assembly

#908086

Vacuum Switch

#911089

Brush Switch

#911089

Jumper

#911211

#1 Wht

#3 Wht

#2 Wht Blk

Blk

Wht

Wire Conectors

(5 Locations)

#911179

OPERATINGPROCEDURES

WARNING! For the safe operation of this machine

follow the instructions given in this booklet and

the training given by your supervisor. Failure to

do so can result in personal injury and/or damage

to machine and property!

DONOT OPERATE MACHINEINANEXPLOSIVEEN-

VIRONMENT!

NEVERUSETHIS MACHINE TOPICK UPVOLATILE

OREXPLOSIVEMATERIALS!

The model shown in this manual is intended for com-

mercial use.

PREPARATION

Topreparethemachine for operation, makesureitisof

correct voltage and properly assembled. If in doubt,

askyoursupervisor.

§ Ifthevacuumisinitsuprightposition(page6), raise

the handle while supporting the vacuum, then

slowly lower the vacuum to the floor.

§Properly install the filter bag in the vacuum:

Liftthecover from the machine. The filter baginlet

is designed with a rubber gasket that fits securely

over the bag adapter (page 7) in the cover. First

pushthefilterbaginletovertheadapteronthecover.

Thenfromtheoutsideofthe cover reach inside the

adapterandpushthegasket on therestoftheway.

Replacethefilterbagwhenfull.

OPERATION

1. Plug the machine’s power cable into a prop-

erlygroundedoutlet (seeGroundingInstructions).

2. Thefootpedal shouldberaised tothe“BRUSH”

position(page8)forwide area vacuuming.

3. Adjust the brush height withtheleverlocatedon

therearofthemachine near the floor (page 8).

4. Turn the vacuum switch ON (rocker switch on

operator’sright,page7).

5. Turn the brush switch ON (rocker switch on

operator’s left, page 7) and begin vacuuming.

OPERATION WITH TOOLS

Threeon-boardtoolsareavailableforthe vacuum: the

dustingtool,crevicetoolandturbotool(page6). Twenty

(20) feet of hose is provided which allows access to

roomswithoutmovingthemachine.

1. The brush and vacuum switches should be

turned OFF.

2. Depress the foot pedal to the “ACCESSORY”

position.

3. Removetherigid portion of theaccessoryhose

fromits’storageareainthehandle andattach the

tool of choice.

4. Turn the vacuum switch ON and begin.

Note:ThevacuumswitchshouldbeOFFwhenswitch-

ingthefootpedal betweentheaccessoryandthebrush

positions.

MAINTENANCE

ALWAYSturn thebrushandvacuummotorswitches

OFF and UNPLUG the power cord from the electri-

cal outlet before doing any clean-up or repairs,

and when the machine is left unattended.

AFTEREACH USE:

1. Vacuum filter bag: If the bag is full or damaged

install a new one.

Filter Bag, 10 Pack – Part Number 650602

Cloth Bag (optional) – Part Number 650601

2. Power cord and plug: Check for cuts or nicks; if

damaged, have the cord replaced at a factory au-

thorizedservicecenter.

3. Casters and Wheels: Remove any strings or de-

bristhatmay restrictthefreemovementof thecast-

ers.

4. Tools: Inspect the tools to ensure there is no ob-

structionofairflow. Removeanydebrisfound.

5. Brush: Remove any strings or debris. Replace if

becomeswornordamaged.

Storage: Thehandlemaybefoldeddownandthe

machinestoreduprightto reduce storage space

requirements. Store the machine in a clean dry area.

MAINTENANCE

WEEKLY:

UNPLUGBEFORESERVICING.

1. Inspect and clean the two vacuum inlet filters.

Removethecoverfromthemachine. Thefiltersare

nowaccessible(seepage10). Theyareconstructed

of foam attached to a plastic mounting ring. Slide

the filters off and clean by shaking or vacuuming.

Replace if there are any rips, tears or can’t be

cleaned.

2. Inspect and clean the exhaust filter. It is lo-

cated under the handle on the top of the machine

(seepage8). Removethefilter and clean byshak-

ing, vacuuming or washing with water. Replace if

there are any rips, tears or if it can’t be cleaned.

VACUUMMOTORMAINTENANCE:

Have the vacuum motors inspected annually by a fac-

toryauthorized servicetechnician. Ifthecarbonbrushes

are worn, they should be replaced. This service will

prolongthelifeofthe motor.

WIDEAREAVACUUM

Hose

#440001310

Cuff (2)

#242402

Clamp with Screw

#S611A

Turbo Tool

#608844

Tool Storage Bag

#650603

Dusting Tool

#658801

Crevice Tool

#658802

Wand (2)

#659801

Body, Machine

#651305

Handle,Machine

#653901

Cover

#652304

Kit,HopperLatch

#655001

(ImageEnlarged)

Wand RecessArea

onHandle(Modelsafter11/07)

#201202Bumper

#930005PopRivet

SWITCH ASSEMBLY

COVER ASSEMBLY

WHEEL ASSEMBLY

Not Shown:

Paper Vacuum Bags, 10 Pack

#440001304

Optional Cloth Bag

#440001305

Handle

#653902

Cap, Handle (2)

#651501

Screw, #8x1/2 THP SMS (3)

#W136D1 Switch, Rocker 20 Amp (2)

#911089

Plate, Switch

#656602

Not Shown:

Lead Assembly, Switch

#911211

Vacuum Switch

Brush Switch

Shaft, Wheel

#657703

Screw, 10-24x1 PHP

#W343D

Nut, 10-20 ESNA S/S

#920017 Two (2) Sets:

Washer, Fibre (5 one side, 6 other side)

#509820

Washer, 7/16 Flat

#W120D

Wheel, 10x1.75 Grey (2)

#229750

Snap Axle Cap (2)

#S482P

Cover

#652302

Gasket, Cover

#653402

Brace

#658505

Nut,10-20 ESNA S/S (2)

#920017 Screws, Handle (2)

#962119

Bag Adapter

Screws, Brace (2)

#W343D

Bag Clamp Assembly Not Seen: Screws (2)

#962029

Clamps (2)

#1394

Nuts (2)

#920017

HANDLE & EXHAUST FILTER COMPONENTS

BRUSH ADJUSTMENT & FOOT PEDAL

Jacknut

#920026

Clamp,Cable

#612001

Screw

#W343D

Cord Assembly, 75 Feet

#440001309

Strain Relief

#508510

Nut, 1/2 Pipe Lock

#920619

Wiring Harness

#911210

Connectors (5)

#911179

Two (2) Sets:

Bracket, Handle

#657201

Screw (2)

#W516D

Label, Warning

#615102

Exhaust Filter

#440001307

Screw, #8x1/2 THP (4)

#W136D

Screen, Filter

#658501

Sound Deadening

#658504

Handle

#653901

Exhaust Filter

#440001307

Brush Height Adjustment

Assembly (detail on page 11)

#650903

Brush/Accessory Foot Pedal

#655101

Label, Brush Adjustment

#655108 Label, Brush Accessory

#655109

NotShown(attop

ofhandle):

Clamp

#1394

Spring

#228331

Screw

#W343D

BRUSH ASSEMBLY

Shoe Brush

#657901

Shaft,Long

#657701

Screw, #8x1/2 THP (8)

#W136D

Two (2) Sets:

Bearing Housing

#654201

Screw, 8-32x3/8 Flat PH (2)

#962105

Bearing (2)

#902035

Brush

#440001308

Shoe End

#657902

Screw(3)

#W136D

Guard, Belt

#653602

Screw(4)

#W136D

Pulley, Brush

#656901

Set Screw (2)

#W168D

Pulley, Motor

#656902

Set Screw (2)

#W168D

Belt,Drive

#440001311

Support, Motor

#650801

Screws (4)

#962019

Brush Motor

#655201

Bracket, Brush Motor

#658503 Two (2) Sets:

Screw, 1/4-20x1/2 HH

#W169D

Washer, 1/4 Lock

#980002

Washer, 1/4 Flat

#W104D

Three (3) Sets:

Screw

#962010

Washer, 1/4 Lock

#980002

JackNut,1/4-20 Zinc

#920028

Shaft,Short

#657702

Two (2) Sets,not shown:

Guard

#653601

Screw, #4x1/4 Type Z PH SMS(2)

#962144

Brush Assembly

#650902

Includes Brush

with Shafts

for Service

Note: BrushMotorInternalRectifier

#911066

VACUUM MOTOR & FILTERS

BOTTOM VIEW

Vacuum Motor, 115V (2)

#655204

Vacuum Motor, 230V (2)

#655205

Vacuum Inlet Filters (2)

#440001306

Gasket,Motor Mount (2)

#633403

Not Shown:

Gasket, Hopper

#653403

Nut (4)

#W106D

Washer (4)

#W401D

(230VOnly)

Screw, 10-32x1/2 Type F

#962030 (230V Only)

Not Shown:

Washer (1)

#W124D

Lead Assembly, Green (2)

#911212

Washer (1)

#W124D

Screw , Motor Mount (4)

#962089

Inhaltsverzeichnis

Andere Hoover Staubsauger Handbücher

Hoover

Hoover Convertible U4123001 Bedienungsanleitung

Hoover

Hoover 5002 Hercules Bedienungsanleitung

Hoover

Hoover Ultra Vortex MBC 500 UV Bedienungsanleitung

Hoover

Hoover Space Explorer Bedienungsanleitung

Hoover

Hoover SteamVac SpinScrub Bedienungsanleitung

Hoover

Hoover SH10050 Bedienungsanleitung

Hoover

Hoover Z Bedienungsanleitung

Hoover

Hoover C2401 Bedienungsanleitung

Hoover

Hoover U57809RM Windtunnel Cyclonic Bedienungsanleitung

Hoover

Hoover 5012PH VOGUE Bedienungsanleitung

Hoover

Hoover Sensory Ecobox System Bedienungsanleitung

Hoover

Hoover Legacy Supreme S2200 Bedienungsanleitung

Hoover

Hoover SteamVac F5881-900 Bedienungsanleitung

Hoover

Hoover WindTunnel U5458910 Bedienungsanleitung

Hoover

Hoover FloorMate, SpinScrub Floor Mate Spin Scrub Hard Floor... Bedienungsanleitung

Hoover

Hoover Vap&Dry Bedienungsanleitung

Hoover

Hoover Sensory Bedienungsanleitung

Hoover

Hoover RC3P 011 Bedienungsanleitung

Hoover

Hoover SteamVac F5835-900 Bedienungsanleitung

Hoover

Hoover Road Rat Road Rat Wet & Dry Cleaner Bedienungsanleitung

Hoover

Hoover U24409RM Bedienungsanleitung

Hoover

Hoover SteamVac Agility F6211 Bedienungsanleitung

Hoover

Hoover F5505 - Steam Vac Spot Convertible Bedienungsanleitung

Hoover

Hoover CLEANSLATE Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

Exido

Exido 240-114 Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung