Hoover Shampoo-Polisher Bedienungsanleitung

Review this manual before

operating appliance

This cleaner was inspected and packaged carefully before being

shipped from the factory. If you should happen to need assistance

during assembly or operation, call

l-800-944-9200

for automated referral of authorized service

outlet locations (U.S. only) or

l-330-499-9499

to speak with a representative in our Consumer

Response Center.

NOT

RETURN

THIS

PRODUCT

THE

STORE.

Fill in and retain

The model and serial number are located on the rear wheel cover of

polisher.

For your personal records, please enter the COMPLETE model and

serial number in the spaces provided and retain this information.

Your cleaner is model

and has serial number

It is suggested that you attach your sales receipt to this owner’s

manual.Verification of date of purchase may be required for warranty

service of your Hoover product.

Save!

Index

Accessories

...............................................

3,23

Assembly .........................................................

Dry-Cleaning Carpet

Rugs

........................ IO

Floor Care Hints ............................................

Floor

Cleaning/Waxing Chart ......................

How To Use ...................................................

5-7

Cleaning Floors .................................

II-13

Polishing

Buffing

Floors ..............

14-15

Shampooing Carpet

Rugs

.............. 7-10

Waxing Floors ...................................

13-14

If You Have A Problem ..................................

Important Safeguards .....................................

Lubrication .....................................................

Maintenance ..............................................

15-16

Service ......................................................

Unpacking ........................................................

1978,199O

The Hoover Company

IMPORTANT SAFEGUARDS!

When using an electrical appliance, always follow

basic precautions, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE

To reduce the risk of fire, electric shock, or

WARNING:

injury

Use indoors only.

This appliance is provided with double insulation. Use only identi-

cal replacement parts. See instructions for servicing of

double-

insulated appliance under “Service”.

Close supervision is necessary when any appliance is used by or

near children. Do not allow this appliance to be used as a toy or to

run unattended at any time.

Keep hair, loose clothing, fingers, feet and all parts of body away

from openings and other moving parts. Do not operate polisher in

bare feet or when wearing open toe shoes or sandals.

Do not use with flammable or combustible liquids such as gasoline

or use in areas where they may be present.

When using chemicals with this machine, be certain area is well

ventilated.

Follow manufacturer’s instructions for all chemicals used with this

machine. Do not exceed recommended mixing ratios.

Use only commercially available floor cleaners and waxes intended

for machine application.

Use extra care when cleaning on stairs.

Do not put any object into openings. Do not use with any opening

blocked; keep free of dust, lint, hair, or anything that may reduce air

flow.

Unplug the cord from outlet when not in use or when taking off or

putting on brushes or pads. Be sure handle is in upright position

before attaching or removing plug from outlet.

Always disconnect cord from electrical outlet before servicing the

polisher.

Do not unplug by pulling on cord. To unplug, grasp the plug, not

the cord. Never handle plug or appliance with wet hands.

Do not pull or carry by cord, use cord as a handle, close door on

cord or pull cord around sharp edges or corners. Do not run

appliance over cord. Keep cord away from heated surfaces.

The use of an extension cord is not recommended. If an extension

cord is absolutely necessary, use one with an electrical rating equal

or greater than the voltage and amperes specified on the data plate

located on the wheel cover.

Do not use with damaged cord or plug. If appliance is not working

as it should, has been dropped, damaged, left outdoors, or dropped

into water, take it to a Hoover Factory Service Center or Authorized

Hoover Warranty Service Dealer (Depot).

Use appliance for its intended use as described in this owner’s

manual. Use only attachments recommended by The Hoover

Company; others may cause hazards.

SAVES

THESE INSTRUCTIONS!

UnpackingUnpacking

Unpack the shampoo-polisherUnpack the shampoo-polisher

and identify the accessoriesand identify the accessories

shown. Remove and

shown. Remove and dispose of

the cardboard packing.

Shampoo Brushes

Scrubbing-waxing-

Polishing Brushes

Felt Buffing Pads

Zleaning-Waxing

Pads

@@B

Fasteners

kcessory

Bag

Shampoo-Polisher

Questions

Concerns?

;

The Hoover Company wants to quickly resolve any concerns about your

cleaner or questions regarding its use. Look on the list provided with the

.,’

product for your local

Hoover-Factory

Service Center

or in the Yellow

Pages under “Vacuum Cleaners

Household” for the nearest

Authorized

Hoover Warranty Service Dealer

(Depot) or call:

l-888-944-9280

for an automated referral of

authorized service locations (U.S. only)

l-330-499-9499

to speak with a representative

in our Consumer Response Center.

DO NOT RETURN THIS PRODUCT TO THE STORE OR SEND IT TO

NORTH CANTON FOR SERVICE.

Trigger:

squeeze to dispense shampoo solution on carpets and rugs

or scrubbing solution on hard surface floors.

2. Tank cap lock

Tank cap:

holds tank securely in place during use,

4. Bolt

Cord clip:

holds cord in place.

Cord storage hook:

used with trigger to wrap cord for storage.

Handle release:

press with foot to release handle from lock position.

Rear wheel cover

Wheels:

allow shampoo-polisher to be tilted and moved from one area

to another.

10. Splash guard:

prevents solution from splashing baseboards.

11. Tank support:

holds the tank.

12. Nut

13. Tank:

holds shampoo solution for shampooing carpets and rugs; holds

cleaning solution for scrubbing floors.

Operate only at voltage specified on rear wheel cover.

This appliance is intended or household use.

To reduce the risk of electric shock, this appliance has a polarized plug

(one blade is wider than the other). This plug will fit in a polarized outlet

only one way. If the plug does not fit fully in the outlet, reverse the plug. If it

still does not fit, contact a qualified electrician to install the proper outlet. Do

not change the plug in any way.

Assembly

1. Remove tank from shampoo-

polisher and remove nut, bolt and

cord clip from top of lower han-

dle section.

2. Join upper and lower handles,

lining up holes. Place cord clip

around cord with flat side toward

handle and holes to front.

3. Insert bolt through cord clip,

and through small holes of han-

dle; secure with nut. Pull up slack

in cord and tighten nut with

screwdriver.

How to use

The shampoo-polisher’s

ON-

OFF switch is internal and is

operated by lowering and rais-

ing the handle. Be sure handle is

in lock (upright) position before

connecting power cord to wall

outlet.

Start shampoo-polisher by press-

ing handle release lever and

lowering handle. Raise handle to

lock position to stop shampoo-

polisher.

To attach and

remove brushes

and pads

Disconnect from electric circuit

kWrheMputting

on or removing

Place shampoo-polisher upside

down on flat surface.

To attach brushes press each

brush down firmly over brush

shaft, rotating brush until it clicks

into position. To remove -grasp

center of brush with thumb and

fingers and lift up.

To attach pads,

insert end of

fastener through opening in pad.

Place pad over

scrubbing-wax-

ing-polishing brushes only.

The fastener fits around the

brush shaft. Press the fastener to

snap into place. Unsnap fastener

to remove pad.

To attach tank

Attach brushes and pads before

attaching tank.

Set bottom of tank into tank sup-

port.

Turn tank cap lock until the rivet

is directly above slot. Raise tank

cap lock and tank cap. Snap tank

against handle.

Push tank cap down. Slide cap

lock down and turn right or left to

lock tank and cap into position.

To dispense solution

Squeeze trigger to dispense

cleaning solution onto carpet,

rug or floor.

To remove tank

Turn tank cap lock until the rivet

is directly above slot. Lift up lock

and tank cap.

Pull top of tank forward; lift tank

from shampoo-polisher.

Shampooing carpet and rugs

Use a carpet shampoo designed specifically for rotary and foam type

carpet shampooers.

Use shampoo only in concentration as recommended on container.

Use shampoo brushes only on

carpet and rugs.

Shampoo Brushes

Shampoo in dry weather or when your home is heated to insure fast dry-

ing of carpet.

Wool, wool blends and synthetic fiber can be shampooed successfully.

Cotton fibers are non-resilient, “mat?” easily, absorb large quantities of

water, and dry very slowly. Because of-these characteristics, it is not

recommended that you shampoo cotton rugs or carpet with your

shampoo-polisher.

Before you begin

1. Test for colorfastness

Apply some shampoo solution to a small inconspicuous area of the

carpet and rub with a white cloth. Check to see that color does not come

off on the cloth and that the color of the carpet is satisfactory after the

area dries.

2. Check effect of shampoo brushes

Attach shampoo brushes to shampoo-polisher. Prepare a small amount

of shampoo solution in the tank following directions on the shampoo

container. Attach tank and guide the shampoo-polisher over a small area

of the carpet. After shampooing this area, brush the pile in one direction

and let dry. Examine carpet for change in texture. Some carpets or rugs

with loop or twist pile show a change of texture when any cleaning ap-

pliance is used. If this change is not too great, it will not be apparent

after the entire area has been shampooed. The shampoo-polisher, used

according to directions, will leave carpet clean and bright with a

minimum of texture change. If these two tests have proven successful,

proceed with the following steps.

Move furniture

Place plastic or aluminum foil pads under legs of furniture too heavy to

move, so metal slides or wood finishes will not stain carpet. If furniture is

moved back on damp carpet, place pads under legs. to avoid marks and

rust stains.

4. Vacuum thoroughly

Vacuum carpet to remove dust, sand, and lint. The quality of the sham-

pooing job depends, to a great extent, on how thoroughly the dirt is

removed before shampooing.

Remove stains

Special stain removal products are available for carpet and rugs. You

may also pretreat heavily soiled or stained areas by using the shampoo,

according to the instructions on the container.

Use dry cleaning fluid to remove spots which are not soluble in water,

such as grease or chewing gum.

Do not use shampoo-polisher to apply dry cleaning fluid.

Note: Some stains cannot be removed, such as ink, fruit, animal stains

and stains which have been on the carpet for a long time. Those stains

may become more apparent when the film of dirt has been removed by

shampooing.

6. Shampoo inaccessible areas

Dip a hand brush into a bowl of the shampoo solution and brush in-

accessible areas, such as under radiators. Do not pour leftover solution

in your shampoo-polisher. The lint in the solution may plug the tank.

Using the shampoo

polisher

1. Attach shampoo

brushes.

Do not use scrubbing-waxing-

polishing brushes on carpet or

rugs. (Shampoo brushes are very

soft to protect fine rugs and

carpet.)

2. Fill tank

Prepare shampoo solution fol-

lowing directions on container.

Fill tank according to the area be-

ing shampooed. The tank holds a

maximum of 4 quarts (3.75 liters).

Each quart (liter) of solution will

shampoo an area approximately 3

ft.

x9ft.

Umx3m).

liters

-2-

CAUTION: Do not use all-purpose detergents, soaps, ammonia, or

washing soda. They can cause colors to run and may damage carpet

fibers. Liquid household detergents will not give satisfactory cleaning

results. The shampoo solution should be cool or lukewarm, as a hot

solution may fade colors or cause shrinkage.

3. Shampoo carpet

Start at one end of the room and

work toward a door so that it will

not be necessary to walk on the

damp carpet. It is recommended

that an area 3 ft. x 3 ft.

(Im

Im)

be shampooed before moving to

another area. Start the shampoo-

polisher by lowering the handle.

Squeeze trigger intermittently to

apply the solution. Apply spar-

ingly in order not to soak the

carpet. The type of fiber, surface

texture, and height of pile will

determine how much solution

should be used. Guide shampoo-

polisher slowly, slightly overlap-

ping the strokes. Move forward

and backward until the 3 ft. x 3 ft.

area

(Im

x Im) is covered with

Inhaltsverzeichnis

Andere Hoover Staubsauger Handbücher

Hoover

Hoover FloorMate Deluxe FH40162 Bedienungsanleitung

Hoover

Hoover Telios Extra Bedienungsanleitung

Hoover

Hoover H-HANDY 700 PETS Bedienungsanleitung

Hoover

Hoover Freejet 3in1 Bedienungsanleitung

Hoover

Hoover VR81-HU01001 Bedienungsanleitung

Hoover

Hoover Purepower PU2111 001 Bedienungsanleitung

Hoover

Hoover Guardsman C1631 Benutzerhandbuch

Hoover

Hoover FH40005 Bedienungsanleitung

Hoover

Hoover POWER SCRUB Bedienungsanleitung

Hoover

Hoover Deluxe Bedienungsanleitung

Hoover

Hoover FH40010B Bedienungsanleitung

Hoover

Hoover CAPTOR Bedienungsanleitung

Hoover

Hoover dog & cat TURBO Bedienungsanleitung

Hoover

Hoover FloorMate SpinScrub Hard Floor Cleaner Bedienungsanleitung

Hoover

Hoover HW86-DPM-S Bedienungsanleitung

Hoover

Hoover U5491-900 Bedienungsanleitung

Hoover

Hoover WindTunnel T Series Bedienungsanleitung

Hoover

Hoover 9011PH Regal Bedienungsanleitung

Hoover

Hoover POWER DRIVE Bedienungsanleitung

Hoover

Hoover Cordless Hand Vac LiNX Bedienungsanleitung

Hoover

Hoover UH71003 Bedienungsanleitung

Hoover

Hoover UH40265 Bedienungsanleitung

Hoover

Hoover TC5213 Dust Manager Cyclonic Bedienungsanleitung

Hoover

Hoover U5753900 Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung

Nobles

Nobles 608669 Produkthandbuch