Hoover U3721 Bedienungsanleitung

Self-Propelled

Review this manual before

operating cleaner

When using an electrical appliance, basic precautions should

always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE

Warning.

injury:

To reduce the risk of fire, electric shock, or

Do not use outdoors or on wet surfaces.

Close supervision is necessary when any appliance is used by or

near children. Do not allow vacuum cleaner to be used as a toy or to

run unattended at any time.

Keep hair, loose clothing, fingers, feet and all parts of body away

from openings, rotating agitator and any other moving parts.

not

operate cleaner in bare feet or when wearing open toe shoes or

sandals.

Do not pull or carry by cord, use cord as a handle, close door on cord

or pull cord around sharp edges or comers. Do not run appliance

over cord. Keep cord away from heated surfaces.

Do not pick up anything that is burning or smoking, such as ciga-

rettes, matches, or hot ashes.

Do not use to pick up flammable or combustible liquids such as

gasoline or use in areas where they may be present.

Avoid picking up hard, sharp objects with the cleaner. They may

damage the cleaner and the bag.

Unplug cleaner when not in use. Turn off all controls before unplug-

Always disconnect cord from electrical outlet before servicing the

cleaner.

Do not use without dust bag and/or filters in place. Change bag

fr*

quently when picking up very fine materials such as powder.

Use extra care when cleaning on stairs.

Do not put any

obJect

into openings. Do not use with any opening

blocked; keep free of dust, lint, hair, and anything that may reduce air

flow.

Grasp the plug to disconnect from wall outlet to avoid damage to the

cord, plug, prongs, or receptacle. Never handle plug or appliance

with wet hands.

the cleaner has a cord reel, hold on to plug while cord is being

rewound to prevent cord from whipping.

The use of an extension cord is not recommended.

Do not use with damaged cord or plug. If appliance is not working as

it should, has been dropped, damaged, left outdoors, or dropped into

water, take it to a Hoover Factory

SeMce

Center or Authorized

Hoover Warranty Service Dealer (Depot).

Use vacuum cleaner only for its intended use as described in the

instructions.

Use only attachments recommended by The Hoover

Company; others may cause hazards.

Save

these

instructions!

Unpacking

Unpack the cleaner from the

carton and identify the parts

shown. Remove and dispose

of the cardboard packing.

A. Hose

B. Furniture Nozzle

C. Crevice Tool

D. Dusting Brush

E. Wands

F. Paper Bag

G. Fragrance Tablet

(some models only)

The assembled cleaner will

look like the drawing above.

Side-mounted hose

trademark of The

Hoover Company

‘

. Cleaner Description

1. Self Propel Handle Grip

2. OFF-ON-‘Power Surge’ Switch

3. Self Propel Control Button

4. Cord

Storage

Hooks:

located on back of handle and lower edge

of cloth bag. Upper hook rotates for easy cord release.

5. Bag Spring:

place spring ring over hook to support the bag.

Air

Freshener Dispenser:

(some models only) designed to hold a

fragrance tablet and release a pleasant scent during cleaning.

Cloth

Bag

Jacket:

covering for paper bag.

8. Variable Speed:

available on some models.

9. Carrying Handle

10. Tool Cover:

pull out top edge of cover to open.

11. Handle Release Pedals:

step on either pedal to lower handle to

either operating or low position.

12. Twin Headlight:

available on some models.

13. Carpet Height Adjustment Lever:

choose “BARE FLOOR/LOW,

“PLUSH”, or “DEEP PILE” setting.

14. Furniture Guard

15. Edge cleaning:

brushed edge cleaning is provided on the right

side of the cleaner; standard edge cleaning is provided on the left

side.

16. Hose Door:

open door to connect hose to cleaner.

17. Hose and Wand Rack

18. Extension Wands

19. Hose

20. Furniture nozzle

21. Crevice tool

22. Dusting brush

Note:

If using cleaner on new carpet, be sure to change bag fre-

quently.

See “Maintenance” section for bag replacement

Operate

cleaner only at voltage specified on date plate on bottom

of cleaner.

This cleaner is intended for household use.

How to Assemble

Attach hose

With cleaner handle in lowest

position, open hose door and

insert hose end with tabs into

cleaner.

Turn hose end to lock in place.

To remove hose, turn in opposite

direction.

Stretch hose over hose rack and

push opposite hose end

firmly

into “cup” in rack.

Note:

The hole in the “cup” in

the rack is a necessary design

element and will not

inhibit

the

cleaner’s performance.

When cleaning floors,

hose

should remain attached to

cleaner and rack.

Attach tools

Position wands in side of hose

rack and snap into place.

Pull open tool cover.

Snap furniture nozzle (A), crevice

tool (B), and dusting brush (C)

into front of cleaner as shown.

Close tool cover.

CAUTION: When cleaner is

turned on, agitator will con-

tinue to rotate while cleaner

handle is in upright position.

Avoid tipping cleaner or

settlng

it on carpeted stairs,

trlnged

area rugs, or furniture

during tool use.

Place bag spring ring over hook

located on handle.

How

to use

To transport

To move your cleaner from room

to room, put handle in upright

position, tilt cleaner

back

large rear wheels and push

forward.

Your cleaner also has a conve-

nient carrying handle located just

above the tool cover.

Handle positions

The handle of your cleaner has

three positions:

upright

for

storage and tool use;

operating

for general operation on carpet

and floors; low for cleaning

under low furniture. Lower

handle by stepping on either

pedal at rear of cleaner.

When putting the handle into the

upright position, two clicks may

be heard. This is a normal

design characteristic of your

cleaner and can be expected.

ON-OFF

POWER

SURGE-

switch

Operate your cleaner at normal

power by pushing the switch to

the ON position. To turn

cleaner off, push switch back to

the OFF position.

Normal power is to be used for

regular cleaning of carpet and

rugs and when using cleaning

tools.

Your cleaner also has a

‘POWER SURGE’ feature for

extra cleaning power on heavily

soiled carpet. To use this

feature slide switch to the right

as far as possible and hold it in

that position. When released, it

will return to the ON position.

UPRIGHT

OPERATING

POWER

OFF

ONSWIM

Variable speed models

Some cleaners are equipped with a variable speed control.

To decrease

cleaner speed,

which significantly reduces

energy consumption and noise

level, slide button toward LO

setting. At a decreased speed,

cleaner will also move slower and

allow the user more control in

maneuvering in small areas.

To increase

cleaner speed for

very large areas and to provide

maximum cleaning power when

needed, slide the button toward

the HI setting until the desired

speed is obtained.

NOTE:

You may use the ‘POWER

SURGE’ feature at any speed

setting.

Self Propel feature

Note: The Self Propel feature will operate only when motor is

turned on.

This feature moves the cleaner forward and backward at a variable

rate of speed controlled entirely by you.

Self

Propel

Control

Button

To move forward

Push handle grip forward and

guide cleaner in front of you.

The cleaner will move in a

forward direction with little

effort.

To move backward

Gently pull handle grip back and

guide the cleaner toward you.

Guide cleaner carefully at first until

you have adjusted to the ease of

operation.

Continued on next page.

Self Propel control button

For increased

control

of the Self Propel feature in tight places

such as around and under furniture, or on non-carpeted floors

set the cleaner on the lowest speed setting, or push the control

button to OFF to disengage the Self Propel mechanism.

Special features

Edge cleaning

Brushed

edge cleaning is

provided on the right side of the

cleaner to remove embedded

dirt in the carpet near

baseboards and furniture.

Guide right side of cleaner

parallel to edge of carpet or

furniture for brushed edge

cleaning.

Standard

edge cleaning is

provided on the left side of

cleaner to remove surface dust

and litter.

Adjustment for

carpet pile height

The cleaning of carpet and rugs

takes place at the nozzle.

The adjustment lever on the

front of the cleaner is used to

raise and lower the nozzle to

three different self-adjusting

ranges.

It is recommended that the

BARE FLOOR/LOW range be

used on all carpet types.

However, on dense plush or

shag carpet, the cleaner may

be difficult to push. In this

case, reposition the adjustment

lever on the PLUSH or DEEP

PILE setting.

NOZZLE

When cleaning non-carpeted floors, set the adjustment lever to

BARE FLOOR/LOW and use low speed, if available on your cleaner.

If greater control on non-carpeted floors is desired, push the Self

Propel control button to the OFF position.

Mln

Max

Disconnect cleaner from

electrical outlet before mak-

ing nozzle adjustment.

For ease in sliding knob, the

handle should be in the upright

position.

The nozzle will not move into

the adjusted position until

the cleaner handle is lowered

to the operating position.

Air freshener dis-

penser

Some models only.

Lift drawer in bag cap on

cleaner bag and insert the air

freshener tablet that has been

packed with the cleaner. Push

drawer down into position.

The amount of fragrance

released is regulated by sliding

the control to one of three

settings shown on top of bag

cap.

Air freshener tablets may be

obtained from your local

authorized Hoover Dealer

(Depot), a Hoover Factory

Service Center, or by using the

mail order form packed with

your cleaner.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Hoover Staubsauger Handbücher

Hoover

Hoover FloorMate SpinScrub Hard Floor Cleaner Bedienungsanleitung

Hoover

Hoover ELITE FH50251 Bedienungsanleitung

Hoover

Hoover FloorMATE H2850 Bedienungsanleitung

Hoover

Hoover S3865 - Platinum Cyclonic Bagless Canister Vacuum... Bedienungsanleitung

Hoover

Hoover 5221 ULTRA LIGHT Bedienungsanleitung

Hoover

Hoover TRE 1410 Bedienungsanleitung

Hoover

Hoover BV20PAR Bedienungsanleitung

Hoover

Hoover UH70100RM Bedienungsanleitung

Hoover

Hoover WINDTUNNEL Tangle Guard Bedienungsanleitung

Hoover

Hoover FJ180WV2 Bedienungsanleitung

Hoover

Hoover MPWR 40V Bedienungsanleitung

Hoover

Hoover Rapide Ultra HW90-RU-ZA Bedienungsanleitung

Hoover

Hoover Spritz AL71SZ02 Bedienungsanleitung

Hoover

Hoover Road Rat Road Rat Wet & Dry Cleaner Bedienungsanleitung

Hoover

Hoover U5415 WT Bedienungsanleitung

Hoover

Hoover SP24DB6 Bedienungsanleitung

Hoover

Hoover DM71DM03001 Bedienungsanleitung

Hoover

Hoover S5629080 Bedienungsanleitung

Hoover

Hoover Freejet 3 in 1 Bedienungsanleitung

Hoover

Hoover telios plus Bedienungsanleitung

Hoover

Hoover U5361950 Bedienungsanleitung

Hoover

Hoover VAPORLITE PRO Bedienungsanleitung

Hoover

Hoover JOVIS SJ120 Bedienungsanleitung

Hoover

Hoover POWERDASH Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

Exido

Exido 240-114 Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung