Hoover U5184-900 - Whisper Cyclonic Upright Vacuum Bedienungsanleitung

Owner'sManual

Operating and Servicing instructions

www.hoover.corn

Please review this manual before operating your Hoover_ product.

Thank you for choosing a HOOVER+product.

Please enter the complete model and serial

numbers in the spaces provided.

Model

Serial Number

Hint: Attach your salesreceipt to this owner's

manual. Verification of date of purchase

may be required for warranty service of your

HOOVER product.

I+

ll]ll_$1B'+_II-..--._. I _,

Seria_Number _" _J_

Be sure to fl11out and return the product registration card included with your cleaner.

Contents

Carton Contents .......................................................... 4

Assembling Cleaner .................... ................................... 4

Cleaner Descriptions ...................................................... 5

How To Use ........................................................... 5-7

Cleanin 9 Tools .............................. •.......................... 7

Carpet Height Adjustment .............................................. 6

Custom Control TM Switch ................................................ 6

If You Have a Problem .................................................... 11

Clearing Blockages ................................................... 12

Important Safeguards ..................................................... 3

Lubrication ............................................................. l0

Maintenance

Authorized Service ................................................... 13

Cleaninff filter ........................................................ 8

Emptying Dirt Cup .................................................... 8

Replacing Agitator Brush Roll ............................................ 9

Replacing Brush Roll Belt .............................................. 10

Thermal Protector ....................................................... I0

Parts a acceSSorieS mail order form ......................................... 14

If you need assistance:

Visit our website at hoover.com. Follow the service center link to find the service outlet

nearest you OR Colt 1-800-944-9200 for an automated referral of authorized service outlet

locations (U.S+only) OR Call 1-800-263-6376 to speak with a representative in our Consumer

Response Center; Mon-Fri 8am-7pm EST.

Please do not return this product to the store.

This carpet cleaner is intended for household use.

Not intended for commercialuse in any household or for any other commercial purpose+

Operate carpet cleaner only at voltage specified on data plate on back of cleaner.

Plug carpet cleaner into a properly grounded outlet.

Important Safety Instructions

When usingan electrical appliance,alwaysfollow basic precautions,including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE

WARNING: Toreducethe.skoffire,electricshock, or injury:

• Do not use outdoors or on wet surfaces.

- Close supervision is necessary when any appliance is used by or near children. Do not

allow vacuum cleaner to be used as a toy.

• Do not run unattended at any time.

• Keep hair, ]oose clothing, fingers, feet and all parts of body away from openings, rotating

agitator and other moving parts.

• Do not pick up awthing that isburning or smoking, such as dgarettes, matches, or hot ashes.

- Do not use to pick up flammable or combustible materials such as gasoline or fine wood

sandings or use in areas where they may be present.

- Always turn off this appliance before connecting or disconnecting hose.

• Unplug cleanerbeforeconnectingthe powered hand tool.

• Do not use without dirt cup or filters in place. Empty cup and dean filter frequently

when picking up vend fine materials such as powder.

• Use extra care when cleaning on stairs.

• Do not put any object into openings. Do not use with any opening blocked; keep free of

dust, lint, hair, or anything that may reduce air flow.

• Always disconnect cord from electrical outlet before servicing the cleaner.

• Always unplug cleaner when not in use. Turn off alt controls before unplugging.

• Do not unplug by pullingon cord.To unplug,graspthe plug,not the cord.Never handle

plug or appliance with wet hands.

• The use of an extension cord is not recommended.

•Do not use with damaged cord or plug. Ifappliance is not working as it should, has been

dropped, damaged, left outdoors, or dropped into water, take it to a Hoover Sales and

Service Center or Authorized Hoover Warranty Service Dealer (Depot).

• Do not pull or carry by cord, use cord as a handle, close door on cord or pull cord around

sharp edges or comers. Do not run appliance over cord. Keep cord away from heated surfaces.

• Use vacuum cleaner only for its intended use as described in the instructions. Use only

attachments recommended by Hoover; others may cause hazards.

WARNING:

• This product contains chemicals known to the State of California to cause cancer and

reproductive toxicity. Wash hands after handling.

•Do not operate cleaner in bare feet or when wearing open toe shoes or sandals.

• Avoid picking up hard, sharp objects with the cleaner. They may damage the cleaner.

Save these instructions!

1. Assembling cleaner

Carton contents

Empty carton. Find the parts shown below

before disposing of packing materials. Cleaner assembly

Ill

"¢,£ .j

B•

!Attach vacuum

hose to wand.

Slide wand and

handle into the slot

until you hear a

click.

A. Handle section

B. Cleaner body and hose

Accessory packs

The accessories are packed on the cleaner.

C. Crevice wand

D. 2 in 1:Dusting brush/Furniture nozzle

E. Hose

Tool storage

Snap hose into

hose guide down

the back of the

cleaner.

Attach tools: {a)

Slide the 2-int tool

onto post on the

caddy with bristles

facing out. {b) Slot

the crevice toot into

the space behind

the power cord

(when the cord is

stored on the

wraps].

2. How to use

Cleaner description

Operate cleaner only at voltage specifiedon

data plate on hot-tomof cleaner.

The assembled cleaner will look like the

drawing.

I.Handlegrip

2. Extension wand release button

3. Dirt container release button

4.Brushbar onloffbutton

5.On/offbutton

6. Dirt container lid with carry handle

Z Dirt container

8. Exhaust filter cover

9. Handle release pedal

I0, Carpet height adjuster

11.Brushbar on/off indicator

12. Performance indicator

13. Scuff guard bumper

14. Cord wrap with quick release

15.Hose

16. 2-in-1 tooI

17.Power cord

18. Crevice tool

19. Hose guide

20. Bottom cord wrap

21.Wheels

This cleaner is intended for household use,

Not intended for commercial use in any

household or for any other commercial

purpose.

Polarized plug

To reduce the risk of electric shock, this appli-

ance has apolarized plug [one blade is wider

than the other). This plug will fit in apolar-

ized outlet only oneway. If the plug does not

fit fully in the outlet, reverse the plug. If it

still does not fit, contact a qualified electrician

to install the proper outlet. Do not change the

plug in any way.

_ i 20

Custom Control rMswitch

B/_r _

_t n

_t J

ON/OFFbutton

Located on the right shoulder (A), as you look the cleaner front on. Turn

vacuum on by depressing button after plugging cord into electrical outlet.

Brush roll ON/OFF button

Press button (B) to turn brush roll on, for cleaning carpets and rugs.

(Brushrollwillautomaticallystopturningwhen handleisraisedto

upright position.] Turnbrush roll OFF for cleaning hard surface floors.

Cord Release

Turn quick release

cord wrap 180

degrees for easy

cord removal. Store

cord around cord

wraps to keep out of

the way while vacu-

uming.

Carpet height adjustment

The cleaning of car-

pet and rugs takes

place at the nozzle

{c).

When it is necessary

to raise and lower

the nozzle for vari-

ous carpet pile

heights, turn the

nozzle contTOlknob

D) to the desired

setting.

Handle Release Pedal

To release the han-

dle, push the handle

release pedai located

on the lower left side

of the cleaner when

looking at the back

of the deanen

Floor/Carpet Cleaning:

Move the handle and

adjust it to the

[_ i i '.' desired position for

[a} storing the

upright, (b) operat-

ing the cleaner.

NOTE: Rotating

brushbar could

causethe fringe of

arug to become

tangled within

cleaner. Use caution

and turn off the

brushbar when vac-

uuming throw rugs

with fringe.

Settings

For maximum cleaning performance, the

following carpet height settings are recom-

mended.

Low setting: for all types of carpet/bare

floors.

Note: If the cleaner is difficult to push, turn

knob to the next higher setting.

High Pile: for very

deep pile carpet

where easier push-

ing effort is

desired, while

maintaining good

cleaning perfor-

mance.

Cleaning tools

When using cleaning tools, put the cleaner

in the upright position to stopthe brushrolt

rotating, or simply pressthe brushrollon/off

button.

Remove the hose

and handle from

the slot.

Choose any of the

handy accessories

or use the hose

alone. Simply push

the attachment

firmly into the end

of the wand or

hose end. To

remove tool, twist

and pull apart gen-

tly.

Selectpropertool

A]B.Dustingbrushmay be usedforcarved

furniture, table tops, books, lamps, lighting

fixtures, venetian blinds, baseboards, shut-

ters, and registers.

Upholste_ nozzle may be used for uphol-

stered furniture, draperies, mattresses,

clothing, automobile interiors, and carpeted

stairs.

NOTE: To change the dusting brush into an

upholstery tocL zlmpiy snap off the square

plastic ring housing the bristles. To return

to dusting brush for delicate surfaces (and

stow able form) simply push the ring back

into place until you feel a snap

C. Crevice wand can be used intight spaces,

corners and along edges in such places as

dresser drawers, upholstered furniture,

stairs, and baseboards, it can also be used

for extra reach with the extension wand.

D. Hose can be used alone or with handy

accessory attachments.

How to clean tools

Cleaning tools may be washed in warm

water with a detergent. Rinse and air dry

before using.

3. Maintenance

Familiarize yourself with these home main-

tenance tasks. Proper use and care of your

cleaner will ensure continued cleaning

effectiveness,

Dirt Cup Et Filters

Removal and Replacement

WARNING: To reducethe risk of injury from

moving parts, unplug before servicing.

When to empty

We recommend that the dirt cup be emp-

tied before the dirt reaches the max filI line

on cup {Fig.3-I}or after everyuse ifyou

prefer.

CAUTION: Very fine materials, such as

face powder or cornstarch, may seal the

filter and cause lossof suction. When

usingthe cleaner for this type of dust,

empty the cup and cleanthe filters often.

Dirt Cup

Howto empty

Press dirt container

release button and

remove dirt con-

tainer from cleaner.

Hold dirt container over dustbin and press

bin release empty button to empty.

Wipe inside of dust bin and shroud with a

damp cloth to remove allexcess dust.

HEPAFilter

Unclip and remove Tap side of filter

the filter cover until no more dust

from the front of particles fall from

the cleaner to the cartridge.

reveal filter car- NOTE: It is recom-

tridge, mended to clean

this filter every 9-

12 months,

What to buy

When purchasing a new Hepa Filter, ask for

HOOVER part No.59156501,

Pro-filter _WA

Turn and lift fitter

covet from base of

cleaner (3.5).

Remove filter hous-

ing and foam filter

from the base of

cleaner.

Tap clean the housing and wash foam filter

and housing under cold running water.

Leavefilter to dry for 24 hours before

replacingin machine.

What to buy

When purchasinganew Pre-filter, ask for

HOOVERpart No.59156506.

The agitator brush roll When to replace

When agitator brushes are worn, the agita-

tor should be replaced.

To check condition of brushes, disconnect

cleaner from electrical outlet. Move edge

of a card across bottom plate whale turning

agitator. To maintain cleaning effectiveness,

have brush roll replaced if brushes do not

touch card.

What to buy

When purchasing anew agitator, ask for

HOOVER part No. 59156508,

Replacing the brushroll

Disconnectdonnerfrom electrical outlet.

Lay cleaner flat and flip cleaner to expose nozzle

Using a Philips

screwdriver, remove

the 2screws as

indicated on to

release coveT.

Lift brushroll and

unhook from belt.

base. Base should lay flat and face up.

.... mm ! •

Insert new- brushroll by first hooking dTive

belt around area of brusbroll without bristles

and then slotting into position in the base

of the vacuum cleaner.

Replace cover and insert screws back into

position. IMPORTANT: If the brushroli becomes

doggedor jammed, pressthe brush mU reset

buttonfound just abovethe crevic_tool.

Belt replacement

The belt on your Hoover cleaner causes

the brush roll to rotate and is important

for the effective operation of"your cleaner.

The brush roll belt is designed to last a

long time and does not normally need

replacement. The belt is located under the

hood of the cleaner and should be checked

From time to time to be sure it is in good

condition.

Inspecting the belt

Disconnectcleanerfrom electricaloutlet.

The belt can be seen by removing the

bottom plate (A). To remove, step on handle

release pedal and place cleaner in the lowest

position. Turn cleaner over. Using a Phillips

screwdriver, remove the two screws and lift

off the bottom plate.

3f the belt is cracked, gouged or broken, it

should be replaced.

A new belt can be installed at your nearest

Hoover Sales and Service Center.

Lubrication

The cleaner is equipped with bearings that

Contain sufficient lubrication for the life of

the cleaner. The addition of lubricant could

cause damage. Therefore, do not add lubrkant

to any bearings.

Thermal protector

An internal thermal protector has been

designed into your cleaner to protect it from

overheating.

When the thermal protector activates, the

suetion motor will stop running, however the

agitatorwill continue to run.If this happens,

proceed as follows:

1.Turn the cleaner OFF and disconnect it

from the electrical outlet.

2. Check dirt cup, HEPA cartridge filter and

foam filter for dirt accumulation.

3. Refer to "Clearing blockages" section.

4. When the motor cools, the thermal

protector automatically resets and

cleaning may continue.

If the thermal protector continues to

activate after following the above steps,

your cleaner may need servicing (see

"Service" section).

Inhaltsverzeichnis

Sprachen:

Andere Hoover Staubsauger Handbücher

Hoover

Hoover SteamVac Aqility Bedienungsanleitung

Hoover

Hoover OCTOPUS Bedienungsanleitung

Hoover

Hoover U5780900 - WindTunnel Cyclonic Bagless Upright Vacuum... Bedienungsanleitung

Hoover

Hoover WindTunnel Wind Tunnel Bagless Canister... Bedienungsanleitung

Hoover

Hoover Stick Vacuum Bedienungsanleitung

Hoover

Hoover FREEJET EVO Bedienungsanleitung

Hoover

Hoover F7411900 - SteamVac Dual-V Wide Path Deep Carpet... Bedienungsanleitung

Hoover

Hoover Vacuum cleaner Bedienungsanleitung

Hoover

Hoover SteamVac DualV Bedienungsanleitung

Hoover

Hoover Compact Canister Cleaner Bedienungsanleitung

Hoover

Hoover EmPower U5266900 Bedienungsanleitung

Hoover

Hoover Paws & Claws 3014 Bedienungsanleitung

Hoover

Hoover SteamVac Dual F7225-900 Bedienungsanleitung

Hoover

Hoover ATHYSS Bedienungsanleitung

Hoover

Hoover SmartWash+ FH52000 Bedienungsanleitung

Hoover

Hoover Central Vacuum Systems Bedienungsanleitung

Hoover

Hoover TX42PET 011 Bedienungsanleitung

Hoover

Hoover SteamVac SpinScrub FH50046 Bedienungsanleitung

Hoover

Hoover SM156DPN4 Bedienungsanleitung

Hoover

Hoover PERFORMER Bedienungsanleitung

Hoover

Hoover SLALOM Bedienungsanleitung

Hoover

Hoover POWERDASH PET ADVANCED Bedienungsanleitung

Hoover

Hoover Rush TCR4226 Bedienungsanleitung

Hoover

Hoover U5416-900 - TurboPower Upright Vacuum Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung

Nobles

Nobles 608669 Produkthandbuch