Hoover U5786-900 Bedienungsanleitung

Owner'sManual

Operating and Servicing Instructions

Illll Illl I

www.hoover.com

Pleasereview this manual before operating your Hoover® product.

IIIIIIIII IIIIII I I I IIII IIIII III/

Thank you for choosing

Please enter the complete model and serial

numbers in the spaces provided.

Model

Serial Number

Hint: Attach your salesreceipt to this owner's

manual. Verification of date of purchase

may be required for warranty service of your

HOOVER product.

a HOOVER®product.

Serial Number

Be sure to fill out and return the product registration card included with your cleaner.

Contents

Important Safeguards ..................................................... 3

Assembling Cleaner ....................................................... 4

Carton Contents .......................................................... 4

How To Use ............................................................. 5

Cleaner Descriptions ................................................... 5

Embedded DirtFINDER TM Feature ......................................... 6

Cleaning Tools ........................................................ 8

Maintenance ............................................................. 9

Emptying Dirt Cup .................................................... 9

Cleaning filters ................. ] .................................... 10

Thermal Protector .................................................... 16

Replacing Headlight ................................ .................. 12

Replacing Belt ....................................................... 12

Replacing Agitator Brush Roll ........................................... t3

Replacing Edge Oroomers .............................................. 14

Replacing Power Hand Tool............................................. 14

Agitator Brush Roll ................................................ 14

Replacing Power Hand Tool Belt ...................................... 15

Lubrication ......................................................... ]5

Authorized Service ....................................................... 16

If You Have aProblem .................................................... 17

Clearing Blockages ................................................... 18

Parts _ accessories mail order form ......................................... 19

If you need assistance:

Visit our website at hoover.com. Follow the service center link to find the service outlet

nearest you ORCall 1-800-944-9200 for an automated referral of authorized service outlet

locations IU.S. only] OR Ca]] 1-800-263-6376 to speak with a representative in our Consumer

Response Center; Mon-Pri 8am-Tpm EST.

Please do not return this product to the store.

This carpet cleaner is intended for household use.

Not intended for commercial use in any household or for any other commercial purpose.

Operate carpet cleaner only at voltage specified on data plate on back of cleaner.

Plug carpet cleaner into a properly grounded outlet.

Important Instructions

When using an electrical appliance, always follow basic precautions, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE

WARNING: To ,skor o, inJury:

• Do not use outdoors or on wet surfaces.

• Close supervision is necessary when any app]iance is used by or near children. Do not

allow vacuum cleaner to be used as a toy.

• Do not run unattended at any time.

•Keep hair, loose clothing, fingers, feet and all parts of' body away from openings, rotating

agitator and other moving parts.

•Do not pick up anything that is burning or smoking, such as dgarettes, matches, or hot ashes.

• Do not use to pick up flammable or combustible matelials such as gasoline or fine wood

sandings or use in areas where they may be present.

• Always turn off this appliance before connecting or disconnecting hose.

• Unplug cleaner before connecting the powered hand tool.

• Do not use without dirt cup or filters in place. Empty cup and clean filter frequently

when picking up very fine materials such as powder,

• Use extra care when cleaning on stairs.

• Do not put any object into openings. Do not use with any opening blocked; keep free of

dust, lint, hair, or anything that may reduce air flow.

• Always disconnect cord from electrical outlet before servicing the cleaner.

• Always unplug cleaner when not in use. Turn off all controls before unplugging.

• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord. Never handle

plug or appliance with wet hands.

• The use of an extension cord is not recommended.

•Do not use with damaged cord or plug. If appliance is not working as it should, has been

dropped, damaged, left outdoors, or dropped into water, take it to a Hoover Sales and

Service Center or Authorized Hoover Warranty Service Dealer (Depot).

• Do not pull or carry by cord, use c_rd as a handle, close door on cord or pull cord around

sharp edges or comers. Do not run appliance over cord. Keep cord away from heated surfaces.

• Use vacuum cleaner drily for its intended use as described in the instructions. Use only

attachments recommended by Hoover; others may cause hazards,

WARNING:

• This product contains chemicals known to the State of California to cause cancer and

reproductive toxicity. "Wash hands after handling,

• Do not operate cleaner in bare Feet or when wearing open toe shoes or sandals.

• Avoid picking up hard, sharp objects with the cleaner. They may damage the cleaner.

Save these.instructions!

1. Assembling cleaner

Carton contents

A. Handle section

B. Cleanerbody

C. Hose, cleaning tools and wands {packedon

cleaner). Short crevicetool only available

with some models.

D. Powered hand toot (some modds}

Remove all parts from carton and identify each

item shown. Make sure all parts are located

before disposing of packing.

Attach handle

Disconnect cleaner from electrical outlet.

Remove cardboard {A)and screws from handle

section. Discard cardboard.

Open tool cover on Make sure that the

cleaner body {B). switch is in the OFF

Remove powered position.

hand tool {some

models).

Slide handle section onto back of handle.

Push screws into holes on back of handle.

Tighten screws securely with a Phillips

screwdriver.

Remove powered hand tool (some models}

from plastic bag and return it to the toot

storage area,

2. How to use

Cleaner description

Operate cleaner only at voltage specifiedon

data plate on bottom of cleaner,

The assembled cleaner will looklike the

drawing.

t. Handle

2. ON/OFF switch

3. Tool cover

4, Dusting brush

5. Powered hand tool* or Crevicetool*

[dependingon model)

6,Furniture nozzle

7. Dirt cup latch

8. Dirt cup lid

9. Dirt cup

t0. Dirt cup handle

1I. HEPA cartridgefilter

12. Pre-filter

13.Final filter

14. Three position handle releasepedal, Step

on lever to lower handle to

operating or low positions,

15. Nozzle control knob: Slide knob to

correct setting for height of carpet being

cleaned.

16. Furniture guard

17.Headlight

18. Di_F1NDERTM display*

19. Embedded DirtFINDER" sensitivity

switch*

20, Edge groomers

21. Hose

22, Hose rack

23. Cord hooks: Wrap cord around hooks for

storage, The top hook can be rotated

right or left for easy cord release.

24. Carrying handle

25. Extension wands

26. Crevice wand*: stores in rear wand.

"somemodelsonly.

This cleaner is intended for household use.

Not intended for commercial use in any

householdor for any other commercial

purpose.

Polarized plug

To reduce the risk of electric shock, this

appliance has apolarized plug (one blade is

wider than the other). This plug will fit in

a polarized outlet only one way. lfthe plug

does not fit Fully in the outlet, reverse the

plug. lfit still does not fit, contact a quali-

fied electrician to install the proper outlet.

13onot change the plug in any way.

ON-OFF switch

Plug cord into electrical outlet.

To turn cleaner ON, push switch up.

To turn cleaner OFF, push switch down,

Transporting Carrying

cleaner oeaner Handle positions

l_JE!

To move your The cleaner can

cleaner from room also be moved by

to room, put handle using the carrying

inupright position, handle.

tilt cleaner back

on rear wheels and

push forward.

The handle of your cleaner has three

positions; upright for storage and when

using cleaning tools; operating position for

general operation on carpet and floors; low

for reaching under low furniture. Step on

handle release lever to lower handle.

Embedded DirtFINDEW Mfeature {available on some models)

With red and green

lights {A), the

DirtFINDER "_sys-

tem aterts the user

to areas of carpet

that may need more

cleaning atten-

tion. It is able to

sense when larger

amounts of dirt

partides, especially

embedded dirt, are removed.

To let you know that the DirtFINDERTM

feature is ready, the red light will come on

when the cleaner is first turned on. After a

few seconds, the red light will go off and

the green light wilI come on. Cleaning may

then begin.

- The red light may seldom come on dur-

ing cleaning, this means that your cleaner

is picking up primarily fine surface dust

and lint which the system may not detect,

or that the carpet is generally clean. To

increase the feature's sensitivity to dirt, set

the switch {B) to the "HI" position.

• At other times, the red light may stay on

for a considerable amount of time. This

means that the carpet contains ahigh level

of dirt which is being removed by the

cleaner. To decrease the feature's sensitivity

to dirt, set the switch to the "REg."

(Regular) position.

The green light witt remain on throughout

cleaning, except when the detector senses

that a larger amount of dirt is being picked

up; then the red light will come on.

When the red light is on, you should take

additional cleaning strokes in the area until

it changes to green.

Carpet height adjustment

The cleaning of

carpet and rugs

takes place at the

nozzle (t2}.

When it is neces-

sary to raise and

lower the nozzle for

various carpet pile

heights, slide the

nozzle control knob

(D) to the desired

setting,

Handle position

For ease in sliding knob, place handle in the

upright position and tilt cleaner foward (E).

The nozzlewill not move into the adjusted

position until the cleaner handle islowered

to the operating position {F).

Settings

For maximum cleaning performance, the fo -

lowing carpet height settings are

recommended,

• Lowestsetting: for bare floors and all

types of carpet

Note: ]f the cleaner is difficult to push, slide

knob to the next higher setting.

•Higher settings: for very deep pile carpet

where easier pushing effort is desired, while

maintaining good cleaning performance.

Cleaning lightweight

flexible rugs

_ Stand on one end

of rug and move

cleaner toward

other end or edge,

Before reaching .

edge, push down

on handle, This will

lift up the nozzle

(front of cleaner}

and will prevent

rug from dinging

to cleaner, Continue

to lift up nozzle so that when you have

reached the edge, it is completely off the

rug. Move cleaner back to start again, lower

_ozzle, and use onlyforward strokes.

Edge cleaning Stair cleaning

Special edge

groomers are pro-

vided on both sides

of the nozzle to

remove dirt in car-

pet near baseboards

and furniture.

Guide either side of

nozzle parallel to

edge of carpet or

furniture. Use the hose and powered hand tool (some

models} or furniture nozzle for stair clean-

ing. Clean from bottom to top.

When usingcleaning tools, the agitator will

continue to rotate,

CAUTION:To avoid personalinjury or unnec-

essarywear to carpet, and to prevent tee

cleaner from falling, always placeit at bot-

tom of stairs,

How to attach tool cover

The tool cover is

designed with a

"break- away"

feature which

allows it to snap

free if it is pushed

open too faT.

To reattach, align

hinges of cover

with slots on sides

of tool storage area.

Push cover down to

secure in place.

Cleaning tools

Tools allow for cleaning surfaces above the

floor and for reaching hard to clean areas.

Handle must be in the upright position for

tool use.

CAUTION: Agitator continues to rotate while

cleaner handle is in upright position,Avoid

tipping cleaner or setting it on furniture,

fringed area rugsor carpeted stairs during

tool use.

Attach wandandtools

Attach tool or wand to the hose [G).

Attach second wand or tool to'wand [H) by

pushing it firmly onto the wand.

Twist wand or tool slightly to tighten or

toosen the connection,

Howto cleantools

To clean the hose and the powered hand

tool, wipe off dirt with a cloth dampened in

a mild detergent. Rinse with a damp cloth.

Do not submerge powered hand tool in

water.

Cleaning tools may be washed in warm

water with a detergent. Rinse and air dry

before using.

L, J

J! N

Selectpropertool

1. Dustingbrush may he used for carved

furniture, table tops, books, lamps, lighting

fixtures, venetian blinds, baseboards,

shutters, and registers.

J. Furniture nozzlemay be used for

upholstered furniture, draperies, mattresses,

clothing, automobile interiors, and carpeted

stairs.

K. Poweredhand tool" may be usea for

upholstered furniture, carpeted stairs and

hard-to-reach places.

L. Crevice tool* may be used in tight spaces,

corners and along edges in such places as

dresser drawers, upholstered furniture, stairs

and baseboards.

M. Crevice wand* can be used in tight

spaces, corners and along edges in such

places as dresser drawers, upholstered fur-

n{ture, stairs, and baseboards. It can also he

used for extra reach with the dusting brush

and!or extension wand.

N. Wands are used to give extra length to

your hose, Use them with any of the above

tools,

*some models

Extrareachhose*

Push ONIOFF

switch to OFF posi-

tion. Remove

regular hose from

c]eaner. Align end

of extra reach hose

with projections (0)

over slots (P) in dirt

duct.

Slide hose into (P)

and twist hose to

lock it into place.

(To detach hose,

reverse procedure.)

Attach wands or

tools to the other

end of hose,

*Available at addi-

tional cost if not

included with your

cleaner.

3. Maintenance

Familiarize yourself with these home main-

tenance tasks as proper use and care of

,your cleaner will ensure continued cteaning

effectiveness.

Dirt cup

CAUTION: Very fine materials, such as face

powder or cornstarch, may seal the filter and

cause loss of suction. When using the cleaner

for this type of dust, empty the cup and

clean the filters often.

How to empty

The dirt cup assembly consists of the

following parts:

Lid (A)

Dirt Cup [B)

Pro-filter (C)

HEPA Cartridge Filter (D)

Dirt lnlet Opening {E)

Bottom Door Release Button (F1

While the cleaner is in operation, the

pro- filter screen will stop larger debris from

entering the HEPA cartridge filter chamber.

This larger debris will be seen collecting in

the teft side of the dirt cup. The HEPA car-

tridge filter will collect fine particles that

have passed through the pre-filter screen.

Whento empty

It is recommended that the dirt cup be

emptied before the dirt reaches the dirt inlet

opening on back of dirt cup (Fig. 3-I) or

after every use if preferred.

Disconnectcleaner from electrical outlet, Do

not usecleaner without dirt cup or filters in

place.

Push latch IF) to the left to unlock.

Lift cup slightly and pull straight out to

remove from cleaner.

Hold the dirt cup

over trash recep-

tacle. Press the dirt

cup bottom door

release button to

empty dirt cup.

Tap side of cup

to remove debris.

Close the bottom

door firmly to

latch.

Slide cup straight

into cavity. Bot-

tom of cup will rest

behind grooves at

bottom of cleaner

cavity (G).

Push latch (F) to

the right to lock in

place.

Filter assembly

The HEPA cartridge filter and pre-filter are

essentially self-shedding.

Tapping the side of the dirt cup as described

in "How to empty dirt cup" should suffi-

ciently remove dust and fine particles from

the HEPA cartridge filter and ore-filter.

The filter assembly can also be removed for

additional cleaning.

Howto cleanfilter assembly

] Remove dirt cup as

described in "Flow

to empty dirt cup."

Lift up the crank

located at the top

of the dirt cup on

the lid.

Hold the dirt cup

over trash recep-

tacle. Press the dirt

cup bottom door

release button to

open the dirt cup.

Rotate the crank

until filter is clean.

Close the bottom

door firmly to latch

before returning dirt cup to the unit.

Note: The filter can also be removed from

the dirt cup and cleaned. To do so, open top

lid and remove filter and prefilter assembly.

Hold filter over trash receptacle. Tap side

of filter against trash receptacle to remove

debris. Return the filter and prefilter assem-

bly back into the dirt cup. Close the lid

firmly to latch it before returning the dirt

cup to unit.

Andere Handbücher für U5786-900

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Hoover Staubsauger Handbücher

Hoover

Hoover U8187950 Bedienungsanleitung

Hoover

Hoover FloorMATE Hard Floor Cleaner Bedienungsanleitung

Hoover

Hoover TurboPOWER Bedienungsanleitung

Hoover

Hoover RC52SE 011 Bedienungsanleitung

Hoover

Hoover SteamVac Turbo POWER Carpet Cleaner with Auto Rinse... Bedienungsanleitung

Hoover

Hoover Jive DRY Bedienungsanleitung

Hoover

Hoover POWERDRIVE Bedienungsanleitung

Hoover

Hoover Robocom 2 Bedienungsanleitung

Hoover

Hoover UH30601 Bedienungsanleitung

Hoover

Hoover FH40010B Bedienungsanleitung

Hoover

Hoover F5912900 Bedienungsanleitung

Hoover

Hoover SH40060 Bedienungsanleitung

Hoover

Hoover UH72405 Bedienungsanleitung

Hoover

Hoover CAPTOR Bedienungsanleitung

Hoover

Hoover WindTunnel U8146-900 Bedienungsanleitung

Hoover

Hoover FLOORMATE DELUXE FH40160 Series Bedienungsanleitung

Hoover

Hoover FoldAway UH40190 Bedienungsanleitung

Hoover

Hoover TASKVAC 2 Bedienungsanleitung

Hoover

Hoover S3341 - Constellation Bagged Canister Vacuum Bedienungsanleitung

Hoover

Hoover BH70600 Series Bedienungsanleitung

Hoover

Hoover U24409RM Bedienungsanleitung

Hoover

Hoover BH20090 Bedienungsanleitung

Hoover

Hoover PU71 Bedienungsanleitung

Hoover

Hoover DS22G Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung

Nobles

Nobles 608669 Produkthandbuch