Hoover Vibra brush 5841 Bedienungsanleitung

vibra brush

Carpet Shampooer with

Vibrating Powerbrush

Features

Features:

1. Spot Cleaner Attachment

2. Spot Cleaner Trigger Release

3. Spot Cleaner Hose

4. Handle Spray Trigger

5. Clean Water Tank

6. Dirty Water Tank Release

7. Dirty Water Tank

8. Hose Connection Lid

9. Suction Inlet Nozzle

10. Cord Hook

11. Clean Water Tank Release

12. Cord Storage/Carry Handle

13. Dirty Water Exhaust (not shown)

14. Handle Release Pedal

15. On/Off Button

Please contact Hoover Customer Care 1300 360 845,

NZ 0800 387 442 to ﬁnd your local spare parts provider.

5841 Vibra Brush

Congratulations on the purchase of your new HOOVER carpet shampooer. There are many useful

features built into your carpet shampooer. We recommend that you carefully read this instruction

manual to take the best advantage of these features.

Speciﬁcations:

Power: 800W

Clean Water Tank Capacity: 1.5L

Dirty Water Tank Capacity: 1.0L

Cable Length: 7m

Weight: 6.8Kg

Before You Begin

The cleaner must be operated in accordance with these instructions and used only for domestic household

cleaning. This will ensure you obtain full beneﬁt from your new cleaner. This cleaner is not ﬁt to be used as an

industrial cleaner and will void the manufacturer’s warranty if used inappropriately. Keep this instruction manual

in a handy place for future reference.

Important

Always switch the carpet shampooer off and remove the power plug from the power supply before

cleaning your shampooer, when not in use, or attempting any maintenance task. The cleaner must only

be connected to an AC power supply at the voltage shown on the rating plate. This cleaner should only be

used for its intended purpose as described in these instructions.

Precautionary Measures:

1. Do not operate the cleaner too close to heaters, radiators or other hot surfaces.

2. Before inserting the power plug into the power supply, make sure your hands are dry.

3. Before turning on the carpet shampooer, remove any large objects from the carpet in order to

prevent damage to the machine.

4. When removing the power plug from the power supply, do not use the power cable, gently

pull the power plug from the power socket.

Before You Begin

When using your vacuum cleaner, basic

precautions should always be observed, including

the following;

1. This shampooer is not intended for use by

persons (including children) with reduced

physical, sensory or mental capabilities, or

lack of experience and knowledge, unless they

have been given supervision or instruction

concerning use of the shampooer by a person

responsible for their safety

2. Children should be supervised to ensure that

they do not play with the shampooer.

3. If the power cord is damaged it must be

replaced by an authorized service agent or

similarly qualiﬁed persons.

4. Carpets should be dry vacuumed thoroughly

before washing. Use a vacuum cleaner with a

power brush for best results.

5. If using an extension cord please make sure

that it is of an approved type and that it is fully

extended. Failure to do so could cause your

cleaner to overheat and damage it.

6. Do not run the shampooer over the power

cable and power socket on the ﬂoor.

7. Do not place cleaner on stairs or furniture, as it

may result in injury or damage.

8. Do not handle the power plug or cleaner with

wet hands.

9. Do not put any objects into the openings or

operate with the openings blocked. Keep them

free of anything that may reduce air ﬂow.

10. Keep hair, loose clothing, ﬁngers and all parts

of the body away from openings and moving

parts.

11. Do not use this cleaner and accessories on

hard ﬂoors. Using this machine on hard ﬂoors

may scratch or damage your ﬂoor.

12. Do not use the carpet washer on any glowing,

burning or smoking particles.

13. Do not use without the solution tank and dirty

water tank in place.

14. Turn off all controls before unplugging.

15. Do not store cleaner with solution in tanks.

16. Do not use to pick up ﬂammable or

combustible liquids such as petrol or use in

areas where they may be present

17. Only use the cleaning solution provided by

Godfreys.

18. Do not use any high-foaming solutions as

an excessive amount of foam impairs the

functioning of the shampooer. If unsuitable

cleaning solutions are used, this will void the

warranty.

Safety Precautions & Warnings

IMPORTANT! Always ensure that the shampooer is switched off and that the power plug is

disconnected from the power supply before cleaning your shampooer, when not in use, or

attempting any maintenance task.

WARNING! The cleaner must only be connected to an AC power supply at the voltage

shown on the rating plate. This cleaner should only be used for its intended purpose as

described in these instructions. Never operate the carpet shampooer if the water level in

the Dirty Water Tank exceeds the Max Line.

Safety Precautions & Warnings

FAULTS

Consult the trouble shooting guide in this manual if

your carpet shampooer fails to operate properly.

Do not continue to use this shampooer if it appears

to be faulty or if the power supply cord is damaged. If

a fault can’t be rectiﬁed, please return to the point of

purchase.

Caution!

The cleaning head contains electrical connection.

The cleaning head is not a serviceable part. Please

return the product to your nearest Godfreys store if

the cleaning head is faulty.

Warnings

Assembling

1. Remove the two screws from the handle insert, as shown.

2. Insert the handle into the body of the shampooer ensuring that

the handle is pointing backwards. Secure into place with the

screws provided.

3. Install the Clean Water Tank ensuring that it clicks into place, as

shown. Your shampooer is now fully assembled.

IMPORTANT! Always remove the power plug from the power supply before ﬁtting

or removing accessories!

Preparing the Carpet

IMPORTANT! Do not use the shampooer as a dry vacuum.

Preparation

1. Vacuum carpeted surfaces thoroughly. Use

a vacuum cleaner with a powerbrush for best

results.

2. Remove as much furniture from the room as

possible. For furniture that cannot be removed

place plastic or foil under and around the legs

of the furniture and only remove when the

carpet has dried completely.

Helpful Hints for Cleaning Carpet

1. Only use a low foam solution with this

shampooer.

2. Do not oversaturate the carpet with cleaning

solution while using the shampooer.

3. For heavily soiled areas, additional

applications may be necessary.

4. Allow plenty of time to dry the carpet

thoroughly.

5. If cleaning solution comes into contact

with wood furniture or wooden material,

immediately wipe away to avoid damage.

6. Once the carpet has been cleaned with the

shampooer avoid walking on the carpet until it

has completely dried.

7. Before you start cleaning with the shampooer,

determine where to start and end to avoid

walking on previously cleaned areas.

Check for Colour Fastness

Before you begin cleaning the carpet, test for colour

fastness. Dampen a white cloth with solution. Test a

small carpeted area in a closet. Gently rub the cloth

over the area.

Check for colour bleeding. If the cloth remains

clean, it should be safe to clean the carpet.

After Cleaning

1. Allow the carpet to dry completely. Try not to

walk on the carpet until it has thoroughly dried.

2. If you require to walk on the carpet which has

been recently cleaned with the shampooer,

place white towels on the areas to be walked

on.

3. If the carpet has not dried and the furniture

must be placed back into the room, place

plastic or foil under the furniture to prevent

staining the carpet.

4. Thoroughly clean the dirty water tank with

warm (max 40°C) tap water.

Instructions For Use

1. To remove the Clean Water Tank, hold the handle and press

the Clean Water Tank Release.

2. To ﬁll the Clean Water Tank, lift the tank lid and add the

recommended solution. Fill the remainder of the tank with

warm (max 40ºC) tap water.

NOTE: Using more than the recommended amount of

cleaning solution may cause excessive foaming.

3. Close the tank lid, then reinstall the Clean Water Tank ensuring

that it clicks into place.

IMPORTANT! Never leave the shampooer unattended with the power switched

on. Turn off the shampooer and disconnect the power cord from the power supply

before emptying and ﬁlling the tanks. Do not oversaturate the carpet.

WARNING! Do not use bleach. Damage to the shampooer will result. Only use the

manufacturer’s recommended solution.

Clean Water Tank

10.

4. Plug the power plug into the power supply. Turn on the

shampooer by pressing the On/Off Button located on the

base of the shampooer.

IMPORTANT! Ensure that the power cord is secured into the

Cable Hock, as shown.

5. Step onto the Handle Release Pedal to put the shampooer into

the cleaning position. While depressing the handle spray trigger,

push the shampooer in a forward motion. Release the trigger and

pull the shampooer backwards to collect the dirty water.

Note: For best cleaning results, use the shampooer to clean

over recently cleaned surfaces without depressing the handle

spray trigger. Use a steady, moderate, forward and backward

motion. Always work from back to front across the room to

avoid stepping on wet carpet and lowering the carpet pile.

Instructions For Use (continued)

Inhaltsverzeichnis

Andere Hoover Staubsauger Handbücher

Hoover

Hoover EmPower U5266900 Bedienungsanleitung

Hoover

Hoover FH40150 Series Bedienungsanleitung

Hoover

Hoover CH2200 Bedienungsanleitung

Hoover

Hoover FREESPACE EVO Bedienungsanleitung

Hoover

Hoover Dubl-Duty Bedienungsanleitung

Hoover

Hoover UH72460 Bedienungsanleitung

Hoover

Hoover F8100900 - Platinum Carpet Cleaner Bedienungsanleitung

Hoover

Hoover HQ86-GC-M Bedienungsanleitung

Hoover

Hoover U5753900 Bedienungsanleitung

Hoover

Hoover UH71250V Bedienungsanleitung

Hoover

Hoover UH72405 Bedienungsanleitung

Hoover

Hoover Workman 4080 Bedienungsanleitung

Hoover

Hoover HF522SFP Bedienungsanleitung

Hoover

Hoover Xarion Pro Bedienungsanleitung

Hoover

Hoover S3410 Bedienungsanleitung

Hoover

Hoover U4093 Bedienungsanleitung

Hoover

Hoover Chorus CH50PET 021 Bedienungsanleitung

Hoover

Hoover ELITE FH50251 Bedienungsanleitung

Hoover

Hoover UH40145B Bedienungsanleitung

Hoover

Hoover HF122RH Bedienungsanleitung

Hoover

Hoover 69 Bedienungsanleitung

Hoover

Hoover XARION Bedienungsanleitung

Hoover

Hoover Freejet 3 in 1 Bedienungsanleitung

Hoover

Hoover SR71 SR01011 Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung

Nobles

Nobles 608669 Produkthandbuch