Hopf 8029NTS-V2/GPS Bedienungsanleitung

_____________________________________________________________

Technical Manual

GPS - NTP Time Server with LAN Interface

Model 8029NTS-V2/GPS

For DIN Rail Installation

(DIN EN 60715 TH35)

ENGLISH

Version: 08.00

28.08.2018

_____________________________________________________________

SET

IMAGE (8029)

FIRMWARE (8024)

Valid for

Version: 08.xx

Version: 01.xx

Industriefunkuhren

2 / 121 GPS - NTP Time Server with LAN Interface 8029NTS-V2/GPS - V08.00

hopf

Elektronik GmbH

Nottebohmstr. 41

•

D-58511 Lüdenscheid

•

Tel.: +49 (0)2351 9386-86

•

Fax: +49 (0)2351 9386-93

•

Internet: http://www.hopf.com

•

E-Mail: in[email protected]

INPORTANT NOTES

GPS - NTP Time Server with LAN Interface 8029NTS-V2/GPS - V08.00 3 / 121

hopf

Elektronik GmbH

Nottebohmstr. 41

•

D-58511 Lüdenscheid

•

Tel.: +49 (0)2351 9386-86

•

Fax: +49 (0)2351 9386-93

•

Internet: http://www.hopf.com

•

E-Mail: in[email protected]

Version Numbers (Firmware / Description)

THE TERM SET DEFINES THE FIXED RELATIONSHIP BETWEEN THE IMAGE VERSION

AND THE ASSOCIATED H8 FIRMWARE VERSION.

THE FIRST TWO DIGITS OF THE TECHNICAL DESCRIPTION VERSION NUMBER,THE

SET VERSION AND THE IMAGE VERSION MUST BE THE SAME!THEY DESIGNATE THE

SHARED FUNCTIONAL IDENTITY BETWEEN DEVICE,SOFTWARE AND TECHNICAL

DESCRIPTION.

THE VERSION NUMBER OF THE IMAGE AND THE H8 SOFTWARE CAN BE READ IN THE

WEBGUI OF TIME SERVER 8029NTS/GPS (SEE CHAPTER 7.3.5.1 DEVICE

INFORMATION AND CHAPTER 7.3.5.2 HARDWARE INFORMATION).

THE TWO DIGITS AFTER THE DOT IN THE VERSION NUMBER DESIGNATES

CORRECTIONS TO THE FIRMWARE AND/OR DESCRIPTION WHICH HAVE NO EFFECT ON

FUNCTIONALITY.

Downloading Technical Manuals

All current manuals of our products are available free of charge via our homepage on the

Internet.

Homepage: http://www.hopf.com

E-mail: [email protected]om

Symbols and Characters

Operational Reliability

Disregard may cause damages to persons or material.

Functionality

Disregard may impact function of system/device.

Information

Notes and Information.

SERVICE RELIABILITY

4 / 121 GPS - NTP Time Server with LAN Interface 8029NTS-V2/GPS - V08.00

hopf

Elektronik GmbH

Nottebohmstr. 41

•

D-58511 Lüdenscheid

•

Tel.: +49 (0)2351 9386-86

•

Fax: +49 (0)2351 9386-93

•

Internet: http://www.hopf.com

•

E-Mail: in[email protected]

Safety regulations

The safety regulations and observance of the technical data serve to

ensure trouble-free operation of the device and protection of persons and

material. It is therefore of utmost importance to observe and compliance

with these regulations.

If these are not complied with, then no claims may be made under the

terms of the warranty. No liability will be assumed for any ensuing

damage.

Safety of the device

This device has been manufactured in accordance with the latest

technological standards and approved safety regulations

The device should only be put into operation by trained and qualified staff.

Care must be taken that all cable connections are laid and fixed in position

correctly. The device should only be operated with the voltage supply

indicated on the identification label.

The device should only be operated by qualified staff or employees who

have received specific instruction.

If a device must be opened for repair, this should only be carried out by

employees with appropriate qualifications or by

hopf

Elektronik GmbH.

Before a device is opened or a fuse is changed all power supplies must

be disconnected.

If there are reasons to believe that the operational safety can no longer

be guaranteed the device must be taken out of service and labelled

accordingly.

The safety may be impaired when the device does not operate properly

or if it is obviously damaged.

CE-Conformity

This device fulfils the requirements of the EU directive 2014/30/EU

"Electromagnetic Compatibility" and 2014/35/EU "Low Voltage Equipment".

Therefore the device bears the CE identification marking

(CE = Communautés Européennes = European communities)

The CE indicates to the controlling bodies that the product complies with the requirements of

the EU directive - especially with regard to protection of health and safety for the operator and

the user - and may be released for sale within the common markets.

 TABLE OF CONTENTS 
 
 GPS - NTP Time Server with LAN Interface 8029NTS-V2/GPS - V08.00 5 / 121 
hopf
 Elektronik GmbH 
Nottebohmstr. 41
 
•
 
D-58511 Lüdenscheid
 
•
 
Tel.: +49 (0)2351 9386-86
 
•
 
Fax: +49 (0)2351 9386-93
 
•
 
Internet: http://www.hopf.com
 
•
 
E-Mail: in[email protected] 
Contents Page 
1GPS - NTP Time Server 8029NTS/GPS ........................................................................9 
2System Structure........................................................................................................12 
2.1 Housing...................................................................................................................12 
2.2 Power Supply..........................................................................................................12 
2.3 Functional Overview of the Front Panel Elements ...................................................12 
2.3.1 Reset-(Default) Button ....................................................................................................... 12 
2.3.2 NTP Status LEDs (NTP/Stratum/Accuracy)....................................................................... 13 
2.3.3 USB-Port............................................................................................................................ 13 
2.3.4 LAN Interface ETH0........................................................................................................... 13 
2.3.4.1 MAC-Address for ETH0.............................................................................................................. 14 
2.3.5 Sync Status Optical Coupler.............................................................................................. 14 
2.3.6 Sync Status LEDs.............................................................................................................. 14 
2.3.7 GPS Antenna Input............................................................................................................ 15 
3Function Principle.......................................................................................................16 
3.1 Block Diagram.........................................................................................................16 
3.2 Function 8029NTS (WebGUI: Device).....................................................................17 
3.3 Function 8024GPS (WebGUI: Sync Source) ...........................................................17 
4System Behaviour.......................................................................................................18 
4.1 Boot Phase..............................................................................................................18 
4.2 NTP Adjustment Process (NTP/Stratum/Accuracy) .................................................18 
4.3Reset-(Default) Button.............................................................................................18 
4.4 Firmware Update.....................................................................................................19 
4.4.1 Firmware Update 8029NTS (WebGUI: Device)................................................................. 19 
4.4.2 Firmware Update 8024GPS (WebGUI: Sync Source)....................................................... 20 
4.5 Activation of Functions (Activation Key)...................................................................21 
5Installation...................................................................................................................22 
5.1 Installation/Dismounting of the DIN Rail Housing.....................................................22 
5.1.1 Mounting ............................................................................................................................ 22 
5.1.2 Dismounting ....................................................................................................................... 22 
5.2 Protective Earth Conductor (Grounding)..................................................................23 
5.3 Power Connection...................................................................................................23 
5.3.1 AC Power Supply............................................................................................................... 23 
5.3.1.1 Safety and Warning Instructions................................................................................................. 23 
5.3.1.2 Connection to various Power Networks...................................................................................... 24 
5.3.1.3 Power Cable Connection............................................................................................................ 24 
5.3.1.4 Voltage Input / Fuse Protection................................................................................................... 25 
5.3.1.5 Power Supply Specifications....................................................................................................... 25 
5.3.1.6 Power LED.................................................................................................................................. 25 
5.3.2 DC Power Supply............................................................................................................... 25 
5.3.2.1 Power Supply Unit Specifications ............................................................................................... 26 
5.3.2.2 Fuse Protection........................................................................................................................... 26 
5.4 Connection GPS Antenna System...........................................................................26 

 TABLE OF CONTENTS 
 
/ 121 GPS - NTP Time Server with LAN Interface 8029NTS-V2/GPS - V08.00 
hopf
 Elektronik GmbH 
Nottebohmstr. 41
 
•
 
D-58511 Lüdenscheid
 
•
 
Tel.: +49 (0)2351 9386-86
 
•
 
Fax: +49 (0)2351 9386-93
 
•
 
Internet: http://www.hopf.com
 
•
 
E-Mail: in[email protected] 
5 Connection LAN Interface ETH0..............................................................................27 
6 Connection Sync Status Optical Coupler.................................................................27 
6Commissioning...........................................................................................................28 
1 General Procedure..................................................................................................28 
2 Switching on the Operating Voltage.........................................................................29 
3 Establish the Network Connection via Web Browser ...............................................29 
4 Network Configuration for ETH0 via LAN through 
hmc
 ..........................................29 
7HTTP/HTTPS WebGUI –Web Browser Configuration Interface...............................33 
1 Quick Configuration.................................................................................................33 
1.1 Requirements..................................................................................................................... 33 
1.2 Configuration Steps............................................................................................................ 33 
2 General –Introduction.............................................................................................34 
2.1 LOGIN and LOGOUT as User ........................................................................................... 35 
2.2 Navigation via the Web Interface....................................................................................... 36 
2.3 Enter or Changing Data ..................................................................................................... 37 
2.3.1 Changing of Data in 8029NTS (WebGUI: Device)...................................................................... 37 
2.3.2 Changing of Data in 8024GPS (WebGUI: Sync Source) ............................................................ 38 
2.4 Plausibility Check during Input........................................................................................... 39 
3 Description of the Tabs............................................................................................40 
3.1 GENERAL Tab................................................................................................................... 40 
3.2 NETWORK Tab.................................................................................................................. 42 
3.2.1 Host/Nameservice ...................................................................................................................... 42 
3.2.1.1 Hostname .......................................................................................................................... 42 
3.2.1.2 Use Manual DNS Entries................................................................................................... 43 
3.2.1.3 DNS Server 1 to 3.............................................................................................................. 43 
3.2.1.4 Use Manual Gateway Entries ............................................................................................ 43 
3.2.1.5 Default Gateway IPv4........................................................................................................ 43 
3.2.1.6 Default Gateway IPv6........................................................................................................ 43 
3.2.1.7 Network Interface ETH0..................................................................................................... 44 
3.2.1.8 Default Hardware Address (MAC) ..................................................................................... 44 
3.2.1.9 Customer Hardware Address (MAC) ................................................................................. 45 
3.2.1.10 DHCP ................................................................................................................................ 45 
3.2.1.11 IPv4 Address ..................................................................................................................... 45 
3.2.1.12 IPv4 Network Mask............................................................................................................ 45 
3.2.1.13 Operation Mode................................................................................................................. 46 
3.2.1.14 Maximum Transmission Unit (MTU) .................................................................................. 46 
3.2.1.15 IPv6 ................................................................................................................................... 46 
3.2.1.16 DHCP-IPv6........................................................................................................................ 46 
3.2.1.17 IPv6 Address ..................................................................................................................... 47 
3.2.1.18 IPv6 Subnet Prefix Lengh.................................................................................................. 47 
3.2.1.19 VLAN (Activation Key necessary)...................................................................................... 47 
3.2.2 Routing (Activation Key necessary)............................................................................................ 48 
3.2.3 Routing File................................................................................................................................. 49 
3.2.4 Management (Management-Protocols –HTTP, SNMP etc.)...................................................... 50 
3.2.4.1 SNMPv2 / SNMPv3 (Activation Key required) ................................................................... 51 
3.2.5 Time............................................................................................................................................ 52 
3.2.5.1 Synchronization Protocols (Time Protocols –NTP, SNTP etc.)......................................... 52 
3.2.5.2 SINEC H1 time datagram (Activation Key necessary)....................................................... 53 
3.3 NTP Tab............................................................................................................................. 54 
3.3.1 System Info................................................................................................................................. 55 
3.3.2 Kernel Info .................................................................................................................................. 55 
3.3.3 Peers .......................................................................................................................................... 56 
3.3.4 Server Configuration................................................................................................................... 57 

 TABLE OF CONTENTS 
 
 GPS - NTP Time Server with LAN Interface 8029NTS-V2/GPS - V08.00 7 / 121 
hopf
 Elektronik GmbH 
Nottebohmstr. 41
 
•
 
D-58511 Lüdenscheid
 
•
 
Tel.: +49 (0)2351 9386-86
 
•
 
Fax: +49 (0)2351 9386-93
 
•
 
Internet: http://www.hopf.com
 
•
 
E-Mail: in[email protected] 
3.3.4.1 Synchronization Source (General / Synchronization source)............................................. 57 
3.3.4.2 NTP Syslog Messages (General / Log NTP Messages to Syslog) .................................... 57 
3.3.4.3 Crystal Operation............................................................................................................... 58 
3.3.4.4 Broadcast / Broadcast Address ......................................................................................... 59 
3.3.4.5 Broadcast / Authentication / Key ID ................................................................................... 59 
3.3.4.6 Additional NTP SERVERS................................................................................................. 59 
3.3.5 Extended NTP Configuration...................................................................................................... 60 
3.3.5.1 Suppression of unspecified NTP Outputs (Block Output when Stratum Unspecified)........ 60 
3.3.5.2 NTP Timebase................................................................................................................... 61 
3.3.6 Restart NTP................................................................................................................................ 62 
3.3.7 Configuring the NTP Access Restrictions................................................................................... 63 
3.3.7.1 NAT or Firewall.................................................................................................................. 63 
3.3.7.2 Blocking Unauthorised Access .......................................................................................... 64 
3.3.7.3 Allowing Client Requests................................................................................................... 64 
3.3.7.4 Internal Client Protection / Local Network Threat Level..................................................... 64 
3.3.7.5 Addition of Exceptions to Standard Restrictions................................................................ 65 
3.3.7.6 Access Control Options ..................................................................................................... 66 
3.3.8 Symmetric Key............................................................................................................................ 67 
3.3.8.1 Why Authentication?.......................................................................................................... 67 
3.3.8.2 How is Authentication used in the NTP Service?............................................................... 67 
3.3.8.3 How is a key created? ....................................................................................................... 68 
3.3.8.4 How does authentication work?......................................................................................... 68 
3.3.9 Autokey....................................................................................................................................... 69 
3.4 ALARM Tab (Activation Key necessary)............................................................................ 70 
3.4.1 Syslog Configuration................................................................................................................... 70 
3.4.2 E-mail Configuration................................................................................................................... 71 
3.4.3 SNMP Configuration / TRAP Configuration ................................................................................ 72 
3.4.4 Alarm Messages......................................................................................................................... 73 
3.5 DEVICE Tab....................................................................................................................... 74 
3.5.1 Device Information...................................................................................................................... 74 
3.5.2 Hardware Information ................................................................................................................. 74 
3.5.3 Restoring the Factory Defaults Settings ..................................................................................... 75 
3.5.4 Restarting the Module (Reboot Device / Hardware Reset)......................................................... 76 
3.5.5 Image Update for Module 8029NTS (WebGUI: Device) ............................................................. 77 
3.5.5.1 Select Image Update......................................................................................................... 78 
3.5.5.2 Installation Image Update.................................................................................................. 79 
3.5.1 Upload von Anwender SSL-Server-Zertifikat (Upload Certificate) .............................................. 79 
3.5.2 Customized Security Banner ...................................................................................................... 80 
3.5.3 Product Activation....................................................................................................................... 81 
3.5.4 Diagnostics Function .................................................................................................................. 82 
3.5.5 Passwords (Master/Device)........................................................................................................ 82 
3.5.6 Downloading Configuration Files / SNMP MIB............................................................................ 83 
3.6 GPS SYNC SOURCE Tab................................................................................................. 84 
3.6.1 Time and Status.......................................................................................................................... 84 
3.6.2 Set Sync Source Time................................................................................................................ 85 
3.6.3 Time Zone Offset........................................................................................................................ 86 
3.6.4 Daylight Saving Time (DST) ....................................................................................................... 87 
3.6.5 Receiption Quality....................................................................................................................... 88 
3.6.6 Reception Mode.......................................................................................................................... 89 
3.6.7 Receiver Position........................................................................................................................ 89 
3.6.8 SyncON / SyncOFF .................................................................................................................... 90 
3.6.9 Module Info................................................................................................................................. 91 
3.6.10 Module Reset.............................................................................................................................. 91 
3.6.11 Factory Default ........................................................................................................................... 92 
3.6.12 H8 Firmware Update (Sync Source)........................................................................................... 93 
3.6.13 Sync Source Errors..................................................................................................................... 94 
3.6.14 Sync Status OC.......................................................................................................................... 96 
8SSH and Telnet Basic Configuration.........................................................................97 
9Fault Analysis / Troubleshooting...............................................................................98 

 TABLE OF CONTENTS 
 
 8 / 121 GPS - NTP Time Server with LAN Interface 8029NTS-V2/GPS - V08.00 
hopf
 Elektronik GmbH 
Nottebohmstr. 41
 
•
 
D-58511 Lüdenscheid
 
•
 
Tel.: +49 (0)2351 9386-86
 
•
 
Fax: +49 (0)2351 9386-93
 
•
 
Internet: http://www.hopf.com
 
•
 
E-Mail: in[email protected] 
9.1 Error Patterns..........................................................................................................98 
9.1.1 Complete Failure................................................................................................................ 98 
9.1.2 No GPS Reception / No Synchronization .......................................................................... 98 
9.1.3 No Daylight Saving Time / Summer Time Switchover..................................................... 100 
9.2 Support by Company 
hopf
 ...................................................................................100 
10 Maintenance..............................................................................................................101 
10.1 General Guidelines for Cleaning............................................................................101 
10.2 Cleaning the Housing............................................................................................101 
11 Technical Data ..........................................................................................................102 
11.1 General –8029NTS/GPS......................................................................................102 
11.2 Module 8029NTS ..................................................................................................103 
11.3 Module 8024GPS..................................................................................................104 
11.4 Power Supplies .....................................................................................................105 
11.5 Dimensions –DIN Rail Housing.............................................................................107 
12 Factory Defaults of Time Server 8029NTS/GPS......................................................108 
12.1 Factory Default Values of Module 8029NTS (Device)............................................108 
12.1.1 Network............................................................................................................................ 108 
12.1.2 NTP.................................................................................................................................. 109 
12.1.3 ALARM............................................................................................................................. 110 
12.1.4 DEVICE............................................................................................................................ 110 
12.2 Factory Default Values of Module 8024GPS (Sync Source)..................................111 
13 Glossary and Abbreviations ....................................................................................112 
13.1 NTP-specific Terminology......................................................................................112 
13.2 Tally Codes (NTP-specific)....................................................................................112 
13.2.1 Time-specific expressions................................................................................................ 113 
13.3 Abbreviations.........................................................................................................114 
13.4 Definitions .............................................................................................................115 
13.4.1 DHCP (Dynamic Host Configuration Protocol) ................................................................ 115 
13.4.2 NTP (Network Time Protocol).......................................................................................... 115 
13.4.3 SNMP (Simple Network Management Protocol).............................................................. 116 
13.4.4 TCP/IP (Transmission Control Protocol / Internet Protocol) ............................................ 116 
13.5 Accuracy & NTP Basic Principles..........................................................................116 
14 List of RFCs...............................................................................................................118 
15 List of Open Source Packages Used.......................................................................119 
 
 
 
 

GPS -NTP TIME SERVER 8029NTS/GPS

GPS - NTP Time Server with LAN Interface 8029NTS-V2/GPS - V08.00 9 / 121

hopf

Elektronik GmbH

Nottebohmstr. 41

•

D-58511 Lüdenscheid

•

Tel.: +49 (0)2351 9386-86

•

Fax: +49 (0)2351 9386-93

•

Internet: http://www.hopf.com

•

E-Mail: in[email protected]

1 GPS - NTP Time Server 8029NTS/GPS

By GPS time synchronization and the worldwide used time protocol NTP (Network Time

Protocol) the Time Server 8029NTS/GPS turns into a highly accurate NTP Stratum 1 Time

Server. It is used for the synchronization of computers and industrial networks.

The Time Server supports the following synchronization protocols:

•NTP (incl. SNTP)

•Daytime

•Time

•SINEC H1 time datagram (Activation Key necessary)

The Time Server is integrated into a compact DIN Rail housing and is characterized by its

easy and simple operation, although it offers a broad range of functions. Some of the

practice-oriented functionalities are:

•Complete parameterisation via protected WebGUI access

All required settings for operation can be executed via a password proteded WebGUI

also giving an overview of the status of the Time Server 8029NTS/GPS.

•Monitoring of GPS antenna circuit

An error message is generated when there is a short circuit in the GPS antenna circuit

or an open antenna input.

•Automatic switch-over of summer/winter time (initial setting required)

After initial commissioning there is no user intervention for a correct summer/winter

time changeover for the following years required.

•Automatic handling of the leap second

Insertion of a leap second in UTC time is automatically recognised and executed by

the the Time Sever 8029NTS/GPS.

GPS -NTP TIME SERVER 8029NTS/GPS

10 / 121 GPS - NTP Time Server with LAN Interface 8029NTS-V2/GPS - V08.00

hopf

Elektronik GmbH

Nottebohmstr. 41

•

D-58511 Lüdenscheid

•

Tel.: +49 (0)2351 9386-86

•

Fax: +49 (0)2351 9386-93

•

Internet: http://www.hopf.com

•

E-Mail: in[email protected]

A superior security is guaranteed via available coding procedures such as symmetric keys,

autokey and access restrictions and deactivation of non-used protocols.

Diffferent Managemenet and Monitoring Functions are availabe as options (e.g. SNMP,

SNMP-Traps, E-mail notification, Syslog-messages including MIB II and private Enterprise

MIB).

Currently the Time Server 8029NTS/GPS offers following unlockable functions:

•SINEC H1 time datagram

•Static Routing Table

•Alarming and management features

•IEEE 802.1Q Tagged VLAN

A few other basic functions of the Time Server 8029NTS/GPS:

•The Time Server 8029NTS/GPS operates as NTP Server with Stratum 1

•Easy operation via WebGUI

•Status LEDs on the front panel

•Sync status output via optical coupler

•High freewhell accuracy provided by GPS-supported regulation of the internal quartz

basis

•Completely maintance-free system

•SyncOFF Timer (reception failure bypassing) for operation free of fault messages

even based on difficult reception conditions

•Redundant multiple validation of the synchronization signal for an error-free and

leapfree signal evaluation

•Maintefnace-free, buffered backup clock for at least three days

Software supplied:

•

hmc

Remote Software for the operating systems:

oMicrosoft® Windows® NT/2000/XP/VISTA/7 (32/64 Bit)

oMicrosoft® Windows® Server 2003/2008 (32/64 Bit)

oLinux® (32/64 Bit)

oOracle® Solaris SPARC/x86

oIBM AIX® (ab Version 5.2)

oHP-UX 11i (RS232 support only for PA-RISC architecture)

Inhaltsverzeichnis

Andere hopf Andere Handbücher

hopf

hopf 8029HEPTA-V2/GPS Bedienungsanleitung

Beliebte Andere Handbücher anderer Marken

GO Industries

GO Industries 38017 Bedienungsanleitung

Cissell

Cissell 30LBCMAN2 Bedienungsanleitung

RIDGID

RIDGID K-60SP Bedienungsanleitung

Gage Bilt

Gage Bilt GB751SH-5 Bedienungsanleitung

OVE

OVE SIERRA 60 Bedienungsanleitung

ReelCraft

ReelCraft 7800 OLB21 Bedienungsanleitung

Body Armor 4x4

Body Armor 4x4 ECO-SERIES Bedienungsanleitung

ROBLIN

ROBLIN DROP Benutzerhandbuch

EMG

EMG EMG-ACB BARREL Service-Handbuch

MiniSolar

MiniSolar MT-150 Bedienungsanleitung

Parkside

Parkside PSZ 250 B2 Bedienungsanleitung

ABB

ABB REM 610 Produkthandbuch

Parkside

Parkside 55992 Betriebsanleitung

Skyjacker

Skyjacker F250 Bedienungsanleitung

IBM

IBM IBM SYSTEM Z Installationsanleitung

Grech Motors

Grech Motors G28 Bedienungsanleitung

NOVAK

NOVAK BATTERY CARE SHEET Leitfaden

Telemotive

Telemotive blue PiraT Mini Benutzerhandbuch

hopf 8029NTS-V2/GPS Bedienungsanleitung

Beliebte Andere Handbücher anderer Marken