Horizon Hobby Hangar 9 Solo Bedienungsanleitung

www.modellmarkt24.chwww.modellmarkt24.ch

Length....................................................................................................................................47.625 in (1210mm)

Overall Width of Float Assembly................................................................................................27.25 in (692mm)

Tip of Float to the Step...............................................................................................................25.25 in (641mm)

Approximate Weight of Each Float Less Rudder Servo ..................................................................................30 oz

Scale Struts Weight.....................................................................................................................................15.4 oz

Total Weight......................................................................................................................................... 75 to 80 oz

For Models Weighing .....................................................................................................................12.0 to 18.0 lb

ASSEMBLY MANUAL

1/4-Scale Floats

Specifications

www.modellmarkt24.chwww.modellmarkt24.ch

Table of Contents

Using the Manual ..................................................................2

Required Tools and Adhesives ........................................................3

Before Starting Assembly ............................................................3

Recommended Accessories ..........................................................3

FS One ..........................................................................3

Warranty Period ...................................................................4

Limited Warranty...................................................................4

Damage Limits ....................................................................4

Safety Precautions .................................................................4

Questions, Assistance and Repairs .....................................................5

Inspection or Repairs ...............................................................5

Warranty Inspection and Repairs.......................................................5

Non-Warranty Repairs...............................................................5

Safety, Precautions and Warnings......................................................6

Contents of Kit ....................................................................6

Float Assembly ....................................................................7

Float Installation ..................................................................15

Recommended Center of Gravity (CG) .................................................17

2008 Official AMA National Model Aircraft Safety Code................................ 18–19

Instructions for Disposal of WEEE by Users in the European Union...........................20

Using the Manual

This manual is divided into sections to help make assembly easier to understand, and to provide breaks between each

major section. In addition, check boxes have been placed next to each step to keep track of each step completed. Steps

with a single box () are performed once, while steps with two boxes () indicate that the step will require

repeating, such as for a right or left wing panel, two servos, etc. Remember to take your time and follow the directions.

www.modellmarkt24.chwww.modellmarkt24.ch 3

Required Tools and Adhesives

Tools

• Phillips screwdriver: #1 • Pin drill• Drill bit: 5/64-inch (2mm) • Silicone sealant• Hobby knife w/ #11 blade • Adjustable wrench• Hobby knife • Ball driver: 1/8-inch, 3/32-inch• Painter's tape • Plastic wrap or waxed paperAdhesives

• Silicone sealant • Threadlock• Medium CABefore Starting Assembly

Before beginning the assembly of your 25% Fiberglass Floats, remove each part from its bag for inspection. Closely

inspect each piece for damage. If you find any damaged or missing parts, contact the place of purchase.

Recommended Accessories

• DS821 Digital Sport Hi-Torque Servo or equivalent (JRPS821) (2)• 18-inch Servo Lead Extension (JSP98120) (2)Required when using computer radio:

• 12-inch Servo Lead Extension (JRPA098)• 6-inch Y-Harness (JSP98020)Required when using non-computer radio:

• 6-inch Y-Harness (JSP98020) (2)FS One

With FS One® you get more than photorealistic fields, gorgeous skies and realistic-looking aircraft. You get incredibly advanced aerodynamic modeling that simulates every possible aspect of real-world flight.

The first Hangar Pack™will add even more aircraft to FS One. This latest edition

includes ten new planes and helis from your favorite brands, including

Hangar 9, E-flite and Align. You’ll be able to fly aircraft that are only available

on FS One such as the T-REX, Blade CX2, Blade CP Pro, Hangar 9 P-51

and F-22 PTS. And as always, with the Hangar Pack, you still get all the

same great features that you did with the original aircraft. HANS2000 HANS4010

www.modellmarkt24.chwww.modellmarkt24.ch

Warranty Period

Exclusive Warranty- Horizon Hobby, Inc., (Horizon) warranties that the Products purchased (the "Product") will be free from defects in materials and workmanship at the date of purchase by the Purchaser.

Limited Warranty

(a) This warranty is limited to the original Purchaser ("Purchaser") and is not transferable. REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE PURCHASER. This warranty covers only those Products purchased from an authorized Horizon dealer. Third party transactions are not covered by this warranty. Proof of purchase is required for warranty claims. Further, Horizon reserves the right to change or modify this warranty without notice and disclaims all other warranties, express or implied.

(b) Limitations- HORIZON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCT. THE

PURCHASER ACKNOWLEDGES THAT THEY ALONE HAVE DETERMINED THAT THE PRODUCT WILL SUITABLY MEET THE REQUIREMENTS OF THE PURCHASER’S INTENDED USE. (c) Purchaser Remedy- Horizon's sole obligation hereunder shall be that Horizon will, at its option, (i) repair or (ii) replace, any Product determined by Horizon to be defective. In the event of a defect, these are the Purchaser's exclusive remedies. Horizon reserves the right to inspect any and all equipment involved in a warranty claim. Repair or replacement decisions are at the sole discretion of Horizon. This warranty does not cover cosmetic damage or damage due to acts of God, accident, misuse, abuse, negligence, commercial use, or modification of or to any part of the Product. This warranty

does not cover damage due to improper installation, operation, maintenance, or attempted repair by anyone other than

Horizon. Return of any goods by Purchaser must be approved in writing by Horizon before shipment.Damage Limits

HORIZON SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCT, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY. Further, in no event shall the liability of Horizon exceed the individual price of the Product on which liability is asserted. As Horizon has no control over use, setup, final assembly, modification or misuse, no liability shall be assumed nor accepted for any resulting damage or

injury. By the act of use, setup or assembly, the user accepts all resulting liability.

If you as the Purchaser or user are not prepared to accept the liability associated with the use of this Product, you are

advised to return this Product immediately in new and unused condition to the place of purchase.

Law: These Terms are governed by Illinois law (without regard to conflict of law principals).Safety Precautions

This is a sophisticated hobby Product and not a toy. It must be operated with caution and common sense and requires

some basic mechanical ability. Failure to operate this Product in a safe and responsible manner could result in injury

or damage to the Product or other property. This Product is not intended for use by children without direct adult

supervision. The Product manual contains instructions for safety, operation and maintenance. It is essential to read

and follow all the instructions and warnings in the manual, prior to assembly, setup or use, in order to operate correctly

and avoid damage or injury.

www.modellmarkt24.chwww.modellmarkt24.ch 5

Questions, Assistance and Repairs

Your local hobby store and/or place of purchase cannot provide warranty support or repair. Once assembly, setup or use of the Product has been started, you must contact Horizon directly. This will enable Horizon to better answer your questions and service you in the event that you may need any assistance. For questions or assistance, please direct your

email to productsupport@horizonhobby.com, or call 877.504.0233 toll free to speak to a service technician.

Inspection or Repairs

If this Product needs to be inspected or repaired, please call for a Return Merchandise Authorization (RMA). Pack

the Product securely using a shipping carton. Please note that original boxes may be included, but are not designed

to withstand the rigors of shipping without additional protection. Ship via a carrier that provides tracking and insurance

for lost or damaged parcels, as Horizon is not responsible for merchandise until it arrives and is accepted

at our facility. A Service Repair Request is available at www.horizonhobby.com on the “Support” tab. If you do not

have internet access, please include a letter with your complete name, street address, email address and phone number

where you can be reached during business days, your RMA number, a list of the included items, method of payment

for any non-warranty expenses and a brief summary of the problem. Your original sales receipt must also be included

for warranty consideration. Be sure your name, address, and RMA number are clearly written on the outside of the

shipping carton.

Warranty Inspection and Repairs

To receive warranty service, you must include your original sales receipt verifying the proof-of-purchase

date. Provided warranty conditions have been met, your Product will be repaired or replaced free of charge. Repair or

replacement decisions are at the sole discretion of Horizon Hobby.Non-Warranty Repairs

Should your repair not be covered by warranty the repair will be completed and payment will be

required without notification or estimate of the expense unless the expense exceeds 50% of the retail

purchase cost. By submitting the item for repair you are agreeing to payment of the repair without notification. Repair

estimates are available upon request. You must include this request with your repair. Non-warranty repair estimates will be billed a minimum of ½ hour of labor. In addition you will be billed for return freight. Please advise us of your preferred

method of payment. Horizon accepts money orders and cashiers checks, as well as Visa, MasterCard, American Express, and Discover cards. If you choose to pay by credit card, please include your credit card number and expiration date. Any

repair left unpaid or unclaimed after 90 days will be considered abandoned and will be disposed of accordingly. Please

note: non-warranty repair is only available on electronics and model engines.

Electronics and engines requiring inspection or repair should be shipped to the following address:Horizon Service Center

4105 Fieldstone Road

Champaign, Illinois 61822

All other Products requiring warranty inspection or repair should be shipped to the following address:Horizon Product Support

4105 Fieldstone Road

Champaign, Illinois 61822

Please call 877-504-0233 with any questions or concerns regarding this product or warranty.

www.modellmarkt24.chwww.modellmarkt24.ch

Safety, Precautions and Warnings

This model is controlled by a radio signal that is subject to interference from many sources outside your control. This

interference can cause momentary loss of control so it is advisable to always keep a safe distance in all directions around

your model, as this margin will help to avoid collisions or injury.

• Always operate your model in an open area away from cars, traffic, or people.• Avoid operating your model in the street where injury or damage can occur.• Never operate the model into the street or populated areas for any reason.• Never operate your model with low transmitter batteries.• Carefully follow the directions and warnings for this and any optional support equipment (chargers, rechargeable battery packs, etc.) that you use.

• Keep all chemicals, small parts and anything electrical out of the reach of children.• Moisture causes damage to electronics. Avoid water exposure to all equipment not specifically designed and protected for this purpose.

Contents of Kit

Replacement Parts

A. HAN4581 Left Float w/HatchB. HAN4582 Right Float w/HatchC. HAN4583 Painted Strut Assembly (including all struts & cross wire bracing)D. HAN4584 Stainless Water Rudder (each)E. HAN4585 Stainless Hardware (bolts and brackets)F. HAN4586 Water Rudder PushrodAvailable Separately

HAN4586 3/4-inch x 24-inch Aluminum Strut (2) w/(4) End FittingsHAN4587 1-inch x 18-inch Aluminum Strut (2)HAN4588 Strut End Fitting (4) and Attachment Bracket (4)PRB2296 Rubber Boot (2)

www.modellmarkt24.chwww.modellmarkt24.ch 7

Required Parts

• Float (right and left) • Servo hatch (2)• Strut bracket (4) • Rubber boot (2)• Servo (2)• 4-40 x 3/8-inch socket head bolt (2)• Rudder assembly (right and left)• Fuel tubing, 1/4-inch (6mm) (3)• 101/4-inch (260mm) front wire brace w/fittings (2)• 11-inch (280mm) rear wire brace w/fittings (2)• 191/4-inch (489mm) horizontal wire brace (2)

• #2 x 1/2-inch sheet metal screw (8)• 8-32 x 11/4-inch socket head bolt w/shoulder (4)• 18-inch (457mm) servo extension (2)• Aluminum cross brace 1 x 201/2-inch (front and rear)

• 4-40 x 1/2-inch socket head bolt (8)• 271/2-inch (700mm) rudder pushrod (2)

• 81/2-inch (216mm) rear diagonal strut (2)

• 71/2-inch (190mm) front diagonal strut (2)

• 141/2-inch (370mm) side diagonal strut (2)

• 8-32 x 3/4-inch socket head bolt w/shoulder (4)Required Tools and Adhesives

• Phillips screwdriver: #1 • Pin drill• Drill bit: 5/64-inch (2mm) • Silicone sealant• Hobby knife w/ #11 blade • Adjustable wrench• Ball driver: 3/32-inch, 1/8-inch• Hex wrench: 1.5mm (included in float kit)oo Step 1

Use painter's tape to tape a piece of plastic or waxed paper over the opening for the servo hatch.

oo Step 2

Apply a bead of silicone sealer around the edge of the

servo hatch. Tape the hatch tightly against the float. The

silicone will create a gasket that will seal the opening after

the servo has been installed.

o Step 3

Repeat Steps 1 and 2 for the remaining float. Since the

silicone will take overnight to dry, it is a good idea to have

them both drying to speed assembly the next day.

oo Step 4

Once the silicone has had time to dry, use a hobby knife

to trim any that extends outside the hatch.

Step 5

Repeat Steps 1 thorugh 4 to create a silicone seal for the

weight access hatch for both the left and right float.

Float Assembly

www.modellmarkt24.chwww.modellmarkt24.ch

 Step 6

Insert the Z-bend from the 271/2-inch (700mm)

rudder pushrod into the rudder tiller arm from the

bottom as shown.

 Step 7

Slide the rubber boot onto the pushrod wire. The boot will

be pressed against the rudder tiller arm.

 Step 8

Use two 4-40 x 1/2-inch socket head bolts to attach the rudder to the float. Use a small amount of silicone

adhesive to secure the rubber boot to the float.

Note: Use care not to get silicone adhesive on the pushrod wire.

Note: Make sure to use threadlock on the screws to prevent them from vibrating loose.

 Step 9

Remove the servo arm from the servo. Use the hardware

provided with the servo to mount it inside the float. The

output of the servo will face toward the front of the float.

www.modellmarkt24.chwww.modellmarkt24.ch 9

 Step 910Use a pin drill and 5/64-inch (2mm) drill bit to enlarge the outer hole of a standard servo arm. Slide

the brass pushrod connector into the hole and secure it

using the connector backplate. Remove the additional

arms from the horn so they will not interfere with the

operation of the water rudder linkage.

Note: Use side cutters to remove any additional servo arms so they do not

interfere with the operation of the rudder.

 Step 11

Use the radio to center the rudder servo. Slide the

connector onto the pushrod wire, then attach the arm to

the servo. Center the rudder and use the 3mm x 6mm

machine screw to secure the pushrod. Cut the excess

pushrod leaving1/2–3/4-inch (13–19mm) forward of

the connector.

Note: Make sure to use threadlock on the screw to prevent it from vibrating loose.

 Step 12

Secure an 18-inch (457mm) servo extension to the rudder

servo lead. A connector has been supplied to prevent it

from becoming unplugged inside the float.

 Step 13

With the connection between the servo lead and extension

inside the float, place the servo hatch onto the float. Use

a #1 Phillips screwdriver to install the four #2 x 1/2-inch sheet metal screws that secure the hatch to the float.

Step 14

Repeat Steps 4 through 13 to install the remaining rudder,

servo and linkage.

www.modellmarkt24.chwww.modellmarkt24.ch

 Step 14

Slide the cross brace into the opening on the side of the

float. Check that the holes in the float align with the brace,

as there is a front and rear brace and the holes do not

match. Use two 8-32 x 1 1/4-inch socket head machine

bolts w/shoulder to attach the strut bracket. The screws go through the bracket, cross brace and into the preinstalled

blind nuts inside the float.

Rear Cross Brace Hole Alignment

Front Cross Brace Hole Alignment

Front

Float

Note: Leave the screws slightly loose until the bracing has been fully installed.

Note: Make sure to use threadlock on the screws to prevent them from vibrating loose.

 Step 15

Install the rear cross brace following the same procedure

as the previous step.

Step 16

Repeat the two previous steps to attach the remaining float

to the cross braces.

Andere Handbücher für Hangar 9 Solo

Inhaltsverzeichnis

Andere Horizon Hobby Spielzeug Handbücher

Horizon Hobby

Horizon Hobby Sparc! AEROLITE 9437 Bedienungsanleitung

Horizon Hobby

Horizon Hobby NIGHT VisionAire Bedienungsanleitung

Horizon Hobby

Horizon Hobby Losi Eight mini Bedienungsanleitung

Horizon Hobby

Horizon Hobby Valiant 10cc Bedienungsanleitung

Horizon Hobby

Horizon Hobby Blade 550X Bedienungsanleitung

Horizon Hobby

Horizon Hobby timber Bedienungsanleitung

Horizon Hobby

Horizon Hobby ECX Temper ECX01015T1 Bedienungsanleitung

Horizon Hobby

Horizon Hobby Spitfire Mk XIV 1.2m Bedienungsanleitung

Horizon Hobby

Horizon Hobby E-FLITE Ultimate 3D BNF Basic Bedienungsanleitung

Horizon Hobby

Horizon Hobby Heli Bedienungsanleitung

Horizon Hobby

Horizon Hobby E-flite EFL54500 Bedienungsanleitung

Horizon Hobby

Horizon Hobby Blade mCPx Bedienungsanleitung

Horizon Hobby

Horizon Hobby E-flite F-16 Falcon 64mm EDF Bedienungsanleitung

Horizon Hobby

Horizon Hobby Blade 450 X Bedienungsanleitung

Horizon Hobby

Horizon Hobby Pawnee Brave Night Flyer AS3X Bedienungsanleitung

Horizon Hobby

Horizon Hobby Ultimate2 Bedienungsanleitung

Horizon Hobby

Horizon Hobby Axial AXI238001 Bedienungsanleitung

Horizon Hobby

Horizon Hobby EXTRA 300 1.3M Bedienungsanleitung

Horizon Hobby

Horizon Hobby Blade mSR BNF Bedienungsanleitung

Horizon Hobby

Horizon Hobby HANGAR 9 Aermacchi MB-339 Bedienungsanleitung

Horizon Hobby

Horizon Hobby Losi SOLID AXLE 4WD MONSTER TRUCK RTR GRAVE... Bedienungsanleitung

Horizon Hobby

Horizon Hobby E-flite Twin Timber Bedienungsanleitung

Horizon Hobby

Horizon Hobby E-flite P-51D Mustang 1.5m Bedienungsanleitung

Horizon Hobby

Horizon Hobby E-FLITE Night Radian 2.0m Bedienungsanleitung

Beliebte Spielzeug Handbücher anderer Marken

marklin

marklin 37321 Bedienungsanleitung

Canon

Canon PAPER CRAFT Bedienungsanleitung

GREAT PLANES

GREAT PLANES Pitts M-12S Bedienungsanleitung

NOCH

NOCH 14261 Bedienungsanleitung

Hausler

Hausler 450 SE V2 Bedienungsanleitung

Dynaflite

Dynaflite Daydream Bedienungsanleitung

Kenner

Kenner Batman 63651 Bedienungsanleitung

LEGO

LEGO 8527 Bedienungsanleitung

Multiplex

Multiplex EasyStar II Bedienungsanleitung

iKarus

iKarus ECO 8 Bedienungsanleitung

Walkera

Walkera 38 Bedienungsanleitung

Hasbro

Hasbro TRANSFORMERS BUMBLEBEE Bedienungsanleitung

MD MXION SWD Bedienungsanleitung

Mattel

Mattel Disney Pixar Cars Cozy Cone Spiral Rampway Bedienungsanleitung

marklin

marklin 39671 Bedienungsanleitung

LEGO

LEGO TECHNIC 8735 Bedienungsanleitung

Mattel

Mattel HOTWHEELS DWL04 Bedienungsanleitung

REVELL

REVELL Bristol Beaufighter TF.X Bedienungsanleitung