HP B2600 Bedienungsanleitung

Andere Handbücher für b2600

12

Inhaltsverzeichnis

Andere HP Desktop Handbücher

HP

HP EN Series Gebrauchsanweisung

HP

HP Presario SR1600 - Desktop PC Montageanleitung

HP

HP Compaq Microtower Business PC dx2300 Gebrauchsanweisung

HP

HP Compaq Presario Bedienungsanleitung

HP

HP Z1 G2 Bedienungsanleitung

HP

HP Compaq 8200 Elite Series Gebrauchsanweisung

HP

HP A524x - Pavilion - 512 MB RAM Bedienungsanleitung

HP

HP DY058A Bedienungsanleitung

HP

HP Brio 8500 Bedienungsanleitung

HP

HP Xw4300 - Workstation - 2 GB RAM Bedienungsanleitung

HP

HP Compaq Presario Bedienungsanleitung

HP

HP DC7600 - HP Gebrauchs- und Wartungshandbuch

HP

HP KAYAK XM600 Bedienungsanleitung

HP

HP Vectra VL6 7 Service-Handbuch

HP

HP Compaq dc7800 Series Gebrauchsanweisung

HP

HP S5220F - Pavilion Slimline - Desktop PC Handbuch

HP

HP Brio 8200 Handbuch

HP

HP m9400f - Pavilion - Elite Technisches Datenblatt

HP

HP Z210 Series Montageanleitung

HP

HP T1000 Bedienungsanleitung

HP

HP Compaq 303B Montageanleitung

HP

HP Compaq Presario Handbuch

HP

HP Compaq Presario Handbuch

HP

HP VR Backpack G2 Handbuch

Beliebte Desktop Handbücher anderer Marken

Asus

Asus E210 Series Bedienungsanleitung

Dell

Dell Inspiron 600m Bedienungsanleitung

Dell

Dell Inspiron 3662 Bedienungsanleitung

TotalFlow

TotalFlow uFLO Bedienungsanleitung

Logitech

Logitech MK320 Bedienungsanleitung

Dell

Dell XPS 730 H2C Bedienungsanleitung

Sony

Sony Vaio Series Bedienungsanleitung

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer Bedienungsanleitung

Alto

Alto MD 250 Bedienungsanleitung

Lenovo

Lenovo ThinkCentre Edge 72 Handbuch

Lenovo

Lenovo ThinkStation D20 Handbuch

Arbor Technology

Arbor Technology FPC-7800 Series Bedienungsanleitung

Sony

Sony VAIO VGX-TP1 Series Bedienungsanleitung

Asus

Asus Eee Box B204 Bedienungsanleitung

Dell

Dell Optiplex 9010 All In One Bedienungsanleitung

Everex

Everex eXplora Bedienungsanleitung

Lenovo

Lenovo ThinkCentre M75e Bedienungsanleitung

Dell

Dell Alienware Area-51 R4 Bedienungsanleitung

1

Read Before Installing

Desktop to Rack-Mount

The B2600 can be used as a desktop or a rack-mount system. This section covers how to convert

your system from a desktop system to a rack-mount system and from a rack-mount system to a

desktop system.

To convert your desktop system to a rack-mount system, you will need to order the rack-mount kit

(HP Part Number: A7228A) from your local HP Sales Representative. Next, follow this procedure:

1. Press in on the release buttons located on both ends of the bezel to remove it. See below

Front Bezel Removal

2. Remove the top and bottom plastic covers from the system by lifting up on the rear of the covers

and pulling toward you. Note that there are two plastic ridges located beneath the top and

bottom covers. These are the points where you should apply your lifting and pulling pressure.

Also the system should be placed on a soft surface to avoid scratching the system covers. See

below:

Removing the Top and Bottom System Covers

3. Note that the cover is only slightly lifted up to avoid breaking the plastic cover locks. These seven

cover locks hold the top and bottom covers to the system chassis.

Follow the instructions on the subsequent pages for rack mounting your system.

2

3

4

5

6

4. Plug-in the workstation that you just rack mounted and set the fan speed. To set the fan speed, use the

Boot Console Handler (bch) and follow this procedure.

A. Turn on the system and press the Tab key until the select display message appears. You should

select the display frequency and resolution that are best for you.

B. Stop the boot process by pressing any key before the ten-second limit. This gets you to the bch

Main Menu. You will only need to do this if you have autoboot turned on; otherwise, the system

stops at the bch Main Menu. When the Main Menu prompt appears, type:

Main Menu: Enter command > configuration

C. Enter the following command at the Conﬁguration Menu prompt:

Configuration Menu: Enter command > FanChoice RackMount

D. Return to the Main Menu and enter this command at the prompt to continue booting:

Configuration Menu: Enter command > boot

Converting Your Rack-Mount System to a Desktop System

To convert your rack-mount system to a desktop system, you will need to order the desktop kit (HP

Part Number (A7227A) from you local HP Sales Representative. Next, follow this procedure:

Unplug the workstation and reverse the procedure in the section “Converting Your Desktop System

to a Rack-Mount System” in this chapter. You will need to complete steps 4 through 1 (respectively).

Complete step 4 stated above,, but at the Conﬁguration Menu prompt in step C, type:

Configuration Menu: Enter command > FanChoice DeskSide

© Copyright 200f1 Hewlett-Packard Company.

Printed in U.S.A