HP Aruba 640 Montageanleitung

EL-MF877-00 Page 1

Template Revision A

Product End-of-Life Disassembly Instructions

Product Category: Networking Equipment

Marketing Name / Model

[List multiple models if applicable.]

HP 640 Redundant/External PS Shelf (J9805A)

Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions

for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU

directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).

1.0 Items Requiring Selective Treatment

1.1 Items listed below are classified as requiring selective treatment.

1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as

applicable.

Item Description

Notes

Quantity

of items

included

in product

Printed Circuit Boards (PCB) or Printed Circuit

Assemblies (PCA)

With a surface greater than 10 sq cm

1 in product, 1 in power adapter

Batteries

All types including standard alkaline and lithium coin

or button style batteries

Mercury-containing components

For example, mercury in lamps, display backlights,

scanner lamps, switches, batteries

Liquid Crystal Displays (LCD) with a surface greater

than 100 sq cm

Includes background illuminated displays with gas

discharge lamps

Cathode Ray Tubes (CRT)

Capacitors / condensers (Containing PCB/PCT)

Electrolytic Capacitors / Condensers measuring

greater than 2.5 cm in diameter or height

External electrical cables and cords

Gas Discharge Lamps

Plastics containing Brominated Flame Retardants

Components and parts containing toner and ink,

including liquids, semi-liquids (gel/paste) and toner

Include the cartridges, print heads, tubes, vent

chambers, and service stations.

Components and waste containing asbestos

Components, parts and materials containing

refractory ceramic fibers

Components, parts and materials containing

radioactive substances

EL-MF877-00 Page 2

Template Revision A

2.0 Tools Required

List the type and size of the tools that would typically be used to disassemble the product to a point where components

and materials requiring selective treatment can be removed.

Tool Description

Tool Size (if

applicable)

Torx Driver

# 10

3.0 Product Disassembly Process

3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:

1. Remove black flat-head screws securing cover, 3 each side, 6 at top rear, - 12 screws total.

2. Remove cover by lifting rear of cover and pulling towards back of unit to disengage lip. Cover is painted zinc-plated

steel.

3. Remove 12 screws holding metal keying mechanisms with springs. Each of the 3 mechanisms is secured by 4

screws. All parts of these mechanisms are steel.

4. Remove 8 screws holding rear connector housings in place. Each of the 4 connector housings is held in place with 2

screws.

5. Remove the 4 connection subassemblies by first pulling the edge-connector end out of its connector then lifting up and

to the rear of the unit to free each subassembly.

6. For each of the connection subassemblies remove the one screw holding the connector housing to the PCB. Connector

housings are aluminum. The 2 connectors on each of the 4 connection PCBs can be pried out if needed since these

are press-fit connectors.

7. Remove the 8 screws that secure the main PCA. Lift PCA at rear and move slightly backwards to disengage LED light

pipe. Light pipe is easily removed by hand.

8. The remaining chassis base is one piece and consists of painted zinc-plated steel.

10.

11.

3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items

contained in the product that require selective treatment (with descriptions and arrows identifying locations).

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere HP Netzwerk-Hardware Handbücher

HP ProCurve 1600M Bedienungsanleitung

HP StoreOnce 4700 Installations- und Benutzerhandbuch

HP ProCurve 8116fl Montageanleitung

HP ProLiant DL980 G7 Kurzanleitung

HP StoreEasy 3000 Bedienungsanleitung

HP AdvanceStack Hub-8U J2610B Installations- und Betriebsanleitung

HP 16-port SCS Bedienungsanleitung

HP procurve radio port 220 Montageanleitung

HP A3550A - High Availability Disk Arrays Model 20 Storage... Bedienungsanleitung

HP ProCurve Radio Port 210 Montageanleitung

HP E-MSM466-R Montageanleitung

HP Enterprise Aruba 7210 Montageanleitung

HP HSR6602-G Montageanleitung

HP SL500 (M852x) Bedienungsanleitung

HP Presario X1000 - Notebook PC Gebrauchsanweisung

HP StorageWorks 2324fc Bedienungsanleitung

HP ARUBA 8320 48 10/6 40 X472 5 2 Bdl Montageanleitung

HP StorageWorks X1000 G2 Anleitung zur Verwendung

HP c-Class Installationsanleitung

HP 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard... Programmierhandbuch

HP AHA-8940 Bedienungsanleitung

HP 800 Series Bedienungsanleitung

HP VMA Series Merkblatt

HP procurve radio port 220 Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Lanner

Lanner NCA-1525 Bedienungsanleitung