HP ProCurve 8116fl Montageanleitung

Product End-of-Life Disassembly Instructions

Product Category: Networking Equipment

Marketing Name / Model

[List multiple models if applicable.]

ProCurve 8116fl Redundant Switch Fabric Module (J8730A)

Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions

for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU

directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).

1.0 Items Requiring Selective Treatment

1.1 Items listed below are classified as requiring selective treatment.

1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as

applicable.

Item Description Notes

Quantity

of items

included

in product

Printed Circuit Boards (PCB) or Printed Circuit

Assemblies (PCA) With a surface greater than 10 sq cm

1 in product, 1

Batteries All types including standard alkaline and lithium coin

or button style batteries 0

Mercury-containing components For example, mercury in lamps, display backlights,

scanner lamps, switches, batteries 0

Liquid Crystal Displays (LCD) with a surface greater

than 100 sq cm Includes background illuminated displays with gas

discharge lamps 0

Cathode Ray Tubes (CRT) 0

Capacitors / condensers (Containing PCB/PCT) 0

Electrolytic Capacitors / Condensers measuring

greater than 2.5 cm in diameter or height

External electrical cables and cords 0

Gas Discharge Lamps 0

Plastics containing Brominated Flame Retardants 0

Components and parts containing toner and ink,

including liquids, semi-liquids (gel/paste) and toner Include the cartridges, print heads, tubes, vent

chambers, and service stations. 0

Components and waste containing asbestos 0

Components, parts and materials containing

refractory ceramic fibers 0

Components, parts and materials containing 0

EL-MF877-00 Page 1

Template Revision A

EL-MF877-00 Page 2

Template Revision A

radioactive substances

2.0 Tools Required

List the type and size of the tools that would typically be used to disassemble the product to a point where components

and materials requiring selective treatment can be removed.

Tool Description Tool Size (if

applicable)

Philips Head Screw Driver # 2

3.0 Product Disassembly Process

3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:

1. Carefully detach the cable that is connecting the LEDs on one end of the bulkhead and the PCA on the other end.

Refer to Picture 1 for more details.

2. Remove the screws securing the bulkhead to PCA using a Philips screw driver (4 per for J8730A).

3. Remove the EMI gasket from the top (1 per) and the side (2 per) of the bulkhead. Refer to Picture 2 for more details.

4. Remove the screws securing the clip to heat sink using a Philips screw driver (24 per for J8730A). Refer to Picture 3

for more details

5. Separate the clip (12 per for J8730A) & standoff (24 for J8730A) from the heat sink.

6. Remove the screws securing the guide pins to the PCA using a Philips screw driver (3 per for J8730A). Refer to

Picture 4 for more details.

7. Separate the guide pins, heat sink, clip, standoff, EMI gasket, cable, PCA and bulkhead

10. .

11.

12.

13.

14.

15.

16.

3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items

contained in the product that require selective treatment (with descriptions and arrows identifying locations).

Picture 1

Picture 2

EL-MF877-00 Page 3

Template Revision A

Picture 3

Picture 4

EL-MF877-00 Page 4

Template Revision A

Inhaltsverzeichnis

Andere HP Netzwerk-Hardware Handbücher

HP X1600 - StorageWorks Network Storage System 5.4TB SAS Model NAS... Bedienungsanleitung

HP StorageWorks T5521A Handbuch

HP ARUBA 8320 48 10/6 40 X472 5 2 Bdl Montageanleitung

HP HPE Synergy 12000 Frame Bedienungs- und Sicherheitshinweise

HP X1600 - StorageWorks Network Storage System 5.4TB SAS Model NAS... Anleitung zur Verwendung

HP AJ878A - StorageWorks 320 GB Hard Drive Bedienungsanleitung

HP FF 12910 Montageanleitung

HP Compaq NC6133 Gebrauchsanweisung

HP 634041-006 Kurzanleitung

HP Aruba 640 Montageanleitung

HP X1600 - StorageWorks Network Storage System 5.4TB SAS Model NAS... Bedienungsanleitung

HP 85027A Service-Handbuch

HP Ethernet Network Interface Card hn230e Bedienungsanleitung

HP A3550A - High Availability Disk Arrays Model 20 Storage... Bedienungsanleitung

HP AJ878A - StorageWorks 320 GB Hard Drive Bedienungsanleitung

HP E5000 Bedienungsanleitung

HP 16-port SCS Bedienungsanleitung

HP zl2 Bedienungsanleitung

HP c-Class Installationsanleitung

HP ProCurve XL MINI-GBIC Bedienungsanleitung

HP AT084A Installationsanleitung

HP ProCurve Networking J8451A Bedienungsanleitung

HP 10:10 LAN Bridge MB Installations- und Betriebsanleitung

HP 5500-24G-SFP EI TAA Montageanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Arista

Arista CCA-ETM-Q12 Bedienungsanleitung