HP 1032 Bedienungsanleitung

ClusterPack

Index of Tutorial Sections

Administrators Guide

1.0 ClusterPack Install QuickStart

1.1 ClusterPack General Overview

1.2 Comprehensive Install Instructions

1.3 Installation and Configuration of Optional Components

1.4 Software Upgrades and Reinstalls

1.5 Golden Image Tasks

1.6 System Maintenance Tasks

1.7 System Monitoring Tasks

1.8 Workload Management Tasks

1.9 System Troubleshooting Tasks

Users Guide

2.1 Job Management Tasks

2.2 File Transfer Tasks

2.3 Miscellaneous Tasks

Tool Overview

3.1 Cluster Management Utility Zone Overview

3.2 Service ControlManager (SCM) Overview

3.3 System Inventory Manager Overview

3.4 Application ReStart (AppRS) Overview

3.5 Cluster Management Utility (CMU) Overview

3.6 NAT/IPFilter Overview

3.7 Platform Computing Clusterware Pro V5.1 Overview

3.8 Management Processor (MP) Card Interface Overview

3.9 HP Systems Insight Manager (HPSIM) Overview

Related Documents

4.1 Related Documents

ackard company

Dictionar

of Cluster Terms

ClusterPack Install QuickStart

ClusterPack

ClusterPack Install QuickStart

1.0.1 How Can I Get My HP-UX Cluster Running?

Step Q1 Fill Out the ClusterPack Installation Worksheet

Step Q2 Install Prerequisites

Step Q3 Allocate File System Space

Step Q4 Obtain a License File

Step Q5 Prepare Hardware Access

Step Q6 Power Up the Management Server

Step Q7 Configure the ProCurve Switch

Step Q8 Copy the License Files to the Management Server

Step Q9 Install ClusterPack on the Management Server

Step Q10 Run manager_config on the Management Server

Step Q11 Run mp_register on the Management Server

Step Q12 Power up the Compute Nodes

Step Q13 Run compute_config on the Management Server

Step Q14 Run finalize_config on the Management Server

1.0.1 How Can I Get My HP-UX Cluster Running?

If you have installed ClusterPack before, follow the instructions in this section as a quick

reminder. You can refer to the detailed instructions for any given step via the links provided.

If you have not installed ClusterPack before, use the Comprehensive Install Instructions

section instead. This QuickStart Guide does NOT cover the use of Golden Images. If you

wish to use Golden Images, use the Comprehensive Install Instructions section instead.

Note:

If you do the installation steps out of order or omit steps, your installation

will leave your systems in an unknown and non-deterministic state.

Step Q1 Fill Out the ClusterPack Installation Worksheet

Print out this form and fill out all information for each node in your cluster.

Installation Worksheet (pdf)

Note:

You will not be able to complete the following steps if you have not

collected all of this information.

For more information, see the Comprehensive Instructions for this step.

References:

zStep 1 Fill Out the ClusterPack Installation Worksheet

Step Q2 Install Prerequisites

Install the following software on the Management Server.

zHP-UX 11i Ignite-UX

zHP-UX 11i V2.0 TCOE

Install the following software on each Compute Node.

zHP-UX 11i Ignite-UX

zHP-UX 11i V2.0 TCOE

Allow the default choices to install.

ClusterPack requires a homogeneous operating system environment. That is, all Compute

odes and the Management Server must have the same release of HP-UX installed as well

as the same operating environment.

The Management Server requires at least one LAN connection. The manager must be able

to contact all the compute nodes using a "management network" that will ve configured by

Clusterpack. In addition, the management server must be able to connect to all the MP cards

on the compute nodes. No network connections need to be configured before installing

Clusterpack, the console interface can be used for all installation and configuration steps.

The Compute Nodes must have Management Processor (MP) cards.

ClusterPack depends on certain open source software which is normally installed as a part

of the operating environment. The minimum release versions required are:

zMySQL Version 3.23.58 or higher

zPerl Version 5.8 or higher

For more information, see the Comprehensive Instructions for this step.

References:

zStep 2 Install Prerequisites

Step Q3 Allocate File System Space

Allocate file system space on the Management Server. Minimum requirements are listed

below.

z/var - 4GB

z/opt - 4GB

z/share - 500MB (Clusterware edition only)

For more information, see the Comprehensive Instructions for this step.

References:

zStep 3 Allocate File System Space

Step Q4 Obtain a License File

zGet the Host ID number of the Management Server.

zContact Hewlett-Packard Licensing Services to redeem your license

certificates.

zIf you purchased the ClusterPack Base Edition, redeem the Base Edition

license certificate.

zIf you purchased the ClusterPack ClusterWare Edition, redeem the Base

Edition certificate and the ClusterWare edition certificate

Note:

It may take up to 24 hours to receive the license file. Plan accordingly.

For more information, see the Comprehensive Instructions for this step.

References:

zStep 4 Obtain a License File

Step Q5 Prepare Hardware Access

Get a serial console cable long enough to reach all the Compute Nodes from the

Management Server.

Note:

If you are installing ClusterPack on Compute Nodes for the first time, DO

NOT power up the systems, ClusterPack will do that for you automatically.

If you do accidentally power the compute nodes, DO NOT answer the HP-

UX boot questions.

For more information, see the Comprehensive Instructions for this step.

References:

zStep 5 Prepare Hardware Access

Step Q6 Power Up the Management Server

Perform a normal first boot for the Management Server.

For more information, see the Comprehensive Instructions for this step.

References:

zStep 6 Power Up the Management Server

Step Q7 Configure the ProCurve Switch

zSelect an IP address from the same IP subnet that will be used for the

Compute Nodes.

zConnect a console to the switch

zLog onto the switch through the console

zType 'set-up'

zSelect IP Config and select the "manual" option

zSelect the IP address field and enter the IP address to be used for the

switch

For more information, see the Comprehensive Instructions for this step.

References:

zStep 7 Configure the ProCurve Switch

Step Q8 Copy the License Files to the Management Server

Put the files in any convenient directory on the Management Server (e.g. /tmp).

For more information, see the Comprehensive Instructions for this step.

References:

zStep 8 Copy the License Files to the Management Server

Step Q9 Install ClusterPack on the Management Server

zMount and register the ClusterPack DVD as a software depot.

zInstall the ClusterPack Manager software (CPACK-MGR) using

swinstall.

zLeave the DVD in the DVD drive for the next step.

For more information, see the Comprehensive Instructions for this step.

References:

zStep 9 Install ClusterPack on the Management Server

Step Q10 Run manager_config on the Management Server

Provide the following information to the manager_config program:

zThe path to the license file(s),

zThe DNS domain and optional NIS domain for the cluster,

zThe host name of the manager and the name of the cluster,

zThe management LAN interface on the Management Server,

zThe IP address(es) of the Compute Node(s),

zWhether to mount a home directory,

zWhether to configure SCM / SysInvMgr or HP SIM software ,

zThe LSF admin password. (Clusterware edition only)

For more information, see the Comprehensive Instructions for this step.

References:

zStep 10 Run manager_config on the Management Server

Step Q11 Run mp_register on the Management Server

Provide the following information to the mp_register program about each Management

Processor card that is connected to a Compute Node:

zIP address,

znetmask,

zgateway IP address.

The information can be provided to mp_register in a file. See the mp_register(1) man page

for the file format.

For more information, see the Comprehensive Instructions for this step.

References:

zStep 11 Run mp_register on the Management Server

Step Q12 Power up the Compute Nodes

Use the clbootnodes program to power up all Compute Nodes that have a connected

Management Processor that you specified in the previous step. The clbootnodes program

will provide the following information to the Compute Nodes:

zLanguage to use,

zHost name,

zTime and time zone settings,

zNetwork configuration,

zRoot password.

For more information, see the Comprehensive Instructions for this step.

References:

zStep 12 Power up the Compute Nodes

Step Q13 Run compute_config on the Management Server

The compute_config program will register the nodes with various programs.

For more information, see the Comprehensive Instructions for this step.

References:

zStep 13 Run compute_config on the Management Server

Step Q14 Run finalize_config on the Management Server

This program completes the installation and configuration process, verifies the Cluster

Management Software, and validates the installation. If it reports diagnostic error messages,

ackard company

repeat the installation process, performing all steps in the order specified.

For more information, see the Comprehensive Instructions for this step.

References:

zStep 14 Set up HyperFabric (optional)

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere HP Software Handbücher

HP Data Protector A.06.11 Bedienungsanleitung

HP NonStop RDF J-series RVUs Programmierhandbuch

HP A4500A - VMEbus Single Board Computer 744... Bedienungsanleitung

HP xw3400 - Workstation Bedienungsanleitung

HP Blade Blade Bedienungsanleitung

HP Data Protector Bedienungsanleitung

HP ProCurve 1600M Bedienungsanleitung

HP BladeSystem Dual NC370i - Multifunction Network... Bedienungsanleitung

HP nld Bedienungsanleitung

HP StorageWorks 1606 - Extension SAN Switch Bedienungsanleitung

HP StorageWorks SSL1016 Gebrauchsanweisung

HP Compaq dc5750 MT Bedienungsanleitung

HP HPE XP P9500 Bedienungsanleitung

HP ActivCard Smart Card Kurzanleitung

HP Integrity BL890c - i2 Server Bedienungsanleitung

HP Pavilion xg900 - Desktop PC Montage- und Bedienungsanleitung

HP BAAD0010HBK-NHSN Bedienungsanleitung

HP StorageWorks 2/64 - Core Switch Service-Handbuch

HP StorageWorks 4/8 - SAN Switch Bedienungsanleitung

HP HPE XP P9500 Bedienungsanleitung

HP Integrity BL860c Service-Handbuch

HP StorageWorks MSA 2/8 - SAN Switch Bedienungsanleitung

HP 2230s - Compaq Business Notebook Bedienungsanleitung

HP ProBook 6445b - Notebook PC Bedienungsanleitung

Beliebte Software Handbücher anderer Marken

COMPRO

COMPRO COMPROFM Bedienungsanleitung

Muratec

Muratec OFFICEBRIDGE ONLINE Bedienungsanleitung

Oracle

Oracle Contact Center Anywhere 8.1 Bedienungsanleitung

Adobe

Adobe 65007312 - Photoshop Lightroom Handbuch

Avaya

Avaya NULL One-X for RIM Blackberry Bedienungsanleitung

PS Audio

PS Audio PowerPlay Betriebsanleitung

Brady

Brady LOCKOUT PRO 3.0 Service-Handbuch

Avaya

Avaya Interaction Center Bedienungsanleitung

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Handbuch

Novell

Novell GROUPWISE 8 - INTERNET AGENT Bedienungsanleitung

Oracle

Oracle Application 9i Bedienungsanleitung

Acer

Acer RDM Bedienungsanleitung

Canon

Canon Vixia HF21 Bedienungsanleitung

Canon

Canon ZR950 Bedienungsanleitung

Samsung

Samsung Auto Backup Bedienungsanleitung

Polycom

Polycom Vortex EF2201 Montage- und Bedienungsanleitung

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Bedienungsanleitung

Novell

Novell SP2 - S Bedienungsanleitung