Huawei FusionCol8000-E260 Bedienungsanleitung

FusionCol8000-E260 Modular Indirect Evaporative

Cooling System

Quick Guide (FDC Scenario)

Issue 01

Date 2022-06-30

HUAWEI DIGITAL POWER TECHNOLOGIES CO., LTD.

No part of this document may be reproduced or transmitted in any form or by any means without prior

written consent of Huawei Digital Power Technologies Co., Ltd.

Trademarks and Permissions

and other Huawei trademarks are the property of Huawei Technologies Co., Ltd.

All other trademarks and trade names mentioned in this document are the property of their respective

holders.

Notice

The purchased products, services and features are stipulated by the contract made between Huawei

Digital Power Technologies Co., Ltd. and the customer. All or part of the products, services and features

described in this document may not be within the purchase scope or the usage scope. Unless otherwise

specied in the contract, all statements, information, and recommendations in this document are

provided "AS IS" without warranties, guarantees or representations of any kind, either express or implied.

The information in this document is subject to change without notice. Every eort has been made in the

preparation of this document to ensure accuracy of the contents, but all statements, information, and

recommendations in this document do not constitute a warranty of any kind, express or implied.

Huawei Digital Power Technologies Co., Ltd.

Address: Huawei Digital Power Antuoshan Headquarters

Futian,Shenzhen 518043

People's Republic of China

Website: https://e.huawei.com

About This Document

Purpose

This document describes the FusionCol8000-E modular indirect evaporative

cooling system in terms of product overview, installation, power-on

commissioning, and operation and maintenance (O&M), providing systemic

knowledge of the FusionCol8000-E.

Intended Audience

This document is intended for:

● Technical support engineers

● Hardware installation engineers

● Commissioning engineers

Symbol Conventions

The symbols that may be found in this document are dened as follows.

Symbol Description

Indicates a hazard with a high level of risk which, if not

avoided, will result in death or serious injury.

Indicates a hazard with a medium level of risk which, if

not avoided, could result in death or serious injury.

Indicates a hazard with a low level of risk which, if not

avoided, could result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not

avoided, could result in equipment damage, data loss,

performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to

personal injury.

FusionCol8000-E260 Modular Indirect Evaporative

Cooling System

Quick Guide (FDC Scenario) About This Document

Symbol Description

Supplements the important information in the main

text.

NOTE is used to address information not related to

personal injury, equipment damage, and environment

deterioration.

Change History

Issue Date Description

01 2022-06-30 This issue is the rst ocial release.

FusionCol8000-E260 Modular Indirect Evaporative

Cooling System

Quick Guide (FDC Scenario) About This Document

Contents

About This Document................................................................................................................ ii

1 Installation Precautions......................................................................................................... 1

2 Materials....................................................................................................................................2

2.1 Water Rell Pipe and Drainpipe.........................................................................................................................................2

2.2 Cables.......................................................................................................................................................................................... 3

3 Installing a Unit....................................................................................................................... 6

3.1 Unpacking and Checking...................................................................................................................................................... 6

3.2 Securing a Unit.........................................................................................................................................................................7

3.3 Checking the Refrigerant...................................................................................................................................................... 9

3.4 Turning Over an Outdoor Exhaust Fan............................................................................................................................9

3.5 Removing Transport Fasteners and Desiccant Bags................................................................................................. 14

4 Installing Pipes.......................................................................................................................16

5 Installing Optional Components....................................................................................... 18

5.1 Installing a Conductivity Sensor...................................................................................................................................... 18

5.2 Installing a Maintenance Socket and Residual Current Circuit Breaker............................................................ 18

6 (Optional) Installing Continuous Cooling Devices....................................................... 20

7 Installing Cables.................................................................................................................... 21

7.1 Precautions.............................................................................................................................................................................. 21

7.2 Routing Cables....................................................................................................................................................................... 21

7.3 Installing Active/Standby Power Cables........................................................................................................................23

7.4 (Optional) Installing Standby DC Power Cables........................................................................................................ 24

7.5 Installing Air Supply Fan Cables...................................................................................................................................... 26

7.6 (Optional) Installing Teamwork and Monitoring Communications Cables......................................................27

7.6.1 Preparing a Network Cable............................................................................................................................................27

7.6.2 CAN Teamwork + RS485 Monitoring..........................................................................................................................28

7.6.3 CAN Teamwork + FE Monitoring................................................................................................................................. 29

7.6.4 FE Teamwork + RS485 Monitoring..............................................................................................................................30

7.6.5 FE Teamwork + FE Monitoring..................................................................................................................................... 31

7.7 (Optional) Installing Signal Cables.................................................................................................................................33

7.8 (Optional) Installing T/H Sensors Outside the Unit and Cables.......................................................................... 36

FusionCol8000-E260 Modular Indirect Evaporative

Cooling System

Quick Guide (FDC Scenario) Contents

8 Installing Fire Dampers........................................................................................................40

9 Installing Air Ducts............................................................................................................... 42

10 Verifying the Installation.................................................................................................. 44

11 Power-On Commissioning.................................................................................................47

11.1 Preparing for Power-On................................................................................................................................................... 47

11.2 (Optional) Commissioning Continuous Cooling Devices......................................................................................47

11.3 Powering On the Unit....................................................................................................................................................... 49

11.4 Home Screen........................................................................................................................................................................ 60

11.5 Initial Conguration.......................................................................................................................................................... 63

11.5.1 Setting T/H Sensor Parameters.................................................................................................................................. 63

11.5.2 (Optional) Setting the Pressure Dierence Control............................................................................................66

11.5.3 (Optional) Setting Conductivity Sensor Parameters...........................................................................................67

11.5.4 (Optional) Setting Teamwork Parameters............................................................................................................. 67

11.5.5 Setting Communications Parameters.......................................................................................................................73

11.5.5.1 Setting Access Control Parameters........................................................................................................................73

11.5.5.2 Setting Communications Parameters (Modbus-RTU Protocol)...................................................................74

11.5.5.3 Setting Communications Parameters (Modbus-TCP Protocol).................................................................... 75

11.5.5.4 Setting Communications Parameters (SNMP Protocol).................................................................................76

11.5.5.5 (Optional) Setting WiFi Parameters......................................................................................................................79

11.6 Startup....................................................................................................................................................................................79

11.7 Wizard Startup.................................................................................................................................................................... 82

11.8 (Optional) Power-O........................................................................................................................................................84

11.9 Checking After Commissioning......................................................................................................................................85

A Physical Ports......................................................................................................................... 86

FusionCol8000-E260 Modular Indirect Evaporative

Cooling System

Quick Guide (FDC Scenario) Contents

1 Installation Precautions

Checking the Auxiliary Facilities

● The horizontal and height errors between concrete platforms must be less

than 5 mm.

● Concrete pads or passages with the bearing capacity meeting local civil work

standards can be built on the eld outside the concrete platforms for access

and maintenance.

Checking the Drainage Capacity

There should be drainage ditches with sucient drainage capacity.

NO TICE

The layout and installation of pipes should facilitate the maintenance of the unit.

Checking Electrical Access for Auxiliaries

Install the unit in strict accordance with the HVAC system construction regulations.

To ensure proper operation of the unit, protect it against dust, dirt, corrosive gas,

and high humidity.

Connection Engineering Precautions

● Air duct installation: It is recommended that exible connections be used

between the unit and air duct. Prepare air ducts based on site requirements.

● Pipe thermal insulation: Take thermal insulation measures for all inlet pipes

and drainpipes of the unit. Reserve sucient space for maintenance and

operations when installing thermal insulation foam for valves and connectors.

At low temperatures, take thermal insulation measures to prevent water pipes

from freezing.

FusionCol8000-E260 Modular Indirect Evaporative

Cooling System

Quick Guide (FDC Scenario) 1 Installation Precautions

2 Materials

Table 2-1 Material description

Item Description Type

Standard

material

This type of materials is

delivered with the unit and

can be obtained from the

ttings bag.

Materials in the packing list

Auxiliary

material

Customers can purchase this

type of materials from the

supplier or other vendors.

Power cable, teamwork cable,

and monitoring cable

Optional

material

Customers can purchase this

type of materials from the

supplier based on application

scenarios.

T/H sensor, smoke sensor,

water sensor, and conductivity

sensor

Engineering

procurement

Customers need to prepare

this type of materials by

themselves.

Drainpipe, water rell pipe,

pipe support, re damper

(switch type), air duct, power

cable terminal, and

equipotential ground lug or

equipotential ground cable.

2.1 Water Rell Pipe and Drainpipe

Table 2-2 Pipe specications

Item Connector Dimensions Material

Spray water

rell pipe

G 1 inch external

thread connector

DN25 Rigid pipe (made of PP-

R or other materials)

Pump water

pan drainpipe

G 1 inch external

thread connector

DN25 Rigid pipe (made of PP-

R or other materials)

FusionCol8000-E260 Modular Indirect Evaporative

Cooling System

Quick Guide (FDC Scenario) 2 Materials

Item Connector Dimensions Material

Spray drainpipe G 1-1/2 inch

external thread

connector

DN40 Rigid pipe (made of PP-

R or other materials)

Condensate

drainpipe

G 1 inch external

thread connector

DN25 Rigid pipe (made of PP-

R or other materials)

2.2 Cables

NO TICE

● The cable diameter must comply with local cable standards. The factors that

aect cable selection include the rated current, cable type, routing mode,

ambient temperature, and maximum expected line loss.

● Waterproof connectors for cables should be designed according to the

recommended cable specications in the following table. If a cable used onsite

does not meet the recommended specications, the cable may fail to be routed

through the waterproof connector or the waterproof connector may fail to be

secured.

● The onsite grounding resistance must comply with related standards.

Table 2-3 Recommended cable specications

Item Recommended Specications

Power cable

(default power)

● Active power input: electronic|electric cable, 600 V/

1000 V, ZA-YJV, (3 x 70 + 1 x 35) mm2, outdoor cable,

● Standby power input: electronic|electric cable, 600 V/

1000 V, ZA-YJV, (3 x 70 + 1 x 35) mm2, outdoor cable,

● (Optional) Standby DC input: electronic|electric cable,

600 V/1000 V, ZA-YJV, 50 mm2, black, 209 A, single-

core double insulation, CE

Power cable

(maximum power)

● Active power input: electronic|electric cable, 600 V/

1000 V, ZA-YJV, (3 x 95 + 1 x 50) mm2, outdoor cable,

● Standby power input: electronic|electric cable, 600 V/

1000 V, ZA-YJV, (3 x 95 + 1 x 50) mm2, outdoor cable,

● (Optional) Standby DC input: electronic|electric cable,

600 V/1000 V, ZA-YJV, 70 mm2, black, 209 A, single-

core double insulation, CE

FusionCol8000-E260 Modular Indirect Evaporative

Cooling System

Quick Guide (FDC Scenario) 2 Materials

Item Recommended Specications

T/H sensor cable,

water sensor (rope

type), and

teamwork and

monitoring

communications

cables

CAT 5e or higher shielded network cable

Fire damper cable Power cable: 3 x 1 mm2 outdoor copper cable

Feedback signal cable: 2 x 22 AWG outdoor copper cable

Air damper cable 4 x 1 mm2 outdoor copper-core cable

Equipotential

ground lug/ground

cable

● Ground lug: Use hot-dip zinc-coated at steel sheet

with a cross-sectional area greater than or equal to 50

mm2.

● Ground cable: Use equipotential ground cables with a

cross-sectional area of at least 16 mm2 and route the

ground cables through a plastic-coated metal hose.

Table 2-4 Cable terminal requirements (default power)

Connector Terminal Specications Quantity

Power cable terminal AC bare crimp terminal,

DT, 70 mm2, M20, tin

plating

Power PE cable

terminal

Bare crimp terminal, DT,

35 mm2, M10, tin plating

Standby DC power

cable terminal

AC bare crimp terminal,

DT, 50 mm2, M10, tin

plating

Table 2-5 Cable terminal requirements (maximum power)

Connector Terminal Specications Quantity

Power cable terminal AC bare crimp terminal,

DT, 95 mm2, M20, tin

plating

Power PE cable

terminal

Bare crimp terminal, DT,

50 mm2, M10, tin plating

FusionCol8000-E260 Modular Indirect Evaporative

Cooling System

Quick Guide (FDC Scenario) 2 Materials

Andere Handbücher für FusionCol8000-E260

Inhaltsverzeichnis

Andere Huawei Zubehör Handbücher

Huawei

Huawei RRU3232 Bedienungsanleitung

Huawei

Huawei Airbridge DBS3900 Bedienungsanleitung

Huawei

Huawei BTS3012 Benutzerhandbuch

Huawei

Huawei iSiteC BTS3601C Bedienungsanleitung

Huawei

Huawei Airbridge cBTS3612 Bedienungsanleitung

Huawei

Huawei iSiteC BTS3601C Bedienungsanleitung

Huawei

Huawei DTSU666-HW Bedienungsanleitung

Huawei

Huawei iSiteC BTS3601C Bedienungsanleitung

Huawei

Huawei AP007 Bedienungsanleitung

Huawei

Huawei RRU3268 Bedienungsanleitung

Huawei

Huawei Airbridge cBTS3612 Bedienungsanleitung

Huawei

Huawei BTS3900B GSM Bedienungsanleitung

Huawei

Huawei BTS3900 V100R003 Leitfaden

Huawei

Huawei pBTS3701 Bedienungsanleitung

Huawei

Huawei Airbridge DBS3900 Technische Daten

Huawei

Huawei NetCol8000-A013 Bedienungsanleitung

Huawei

Huawei TP48200A Bedienungsanleitung

Huawei

Huawei NetCol5000-A050 Bedienungsanleitung

Huawei

Huawei BTS3902E WCDMA Bedienungsanleitung

Huawei

Huawei BTS3900A Bedienungsanleitung

Huawei

Huawei BTS3606 Bedienungsanleitung

Huawei

Huawei DTSU666-H Bedienungsanleitung

Huawei

Huawei BBU3900 Betriebsanleitung

Huawei

Huawei Airbridge BTS3612A-1900 Bedienungsanleitung

Beliebte Zubehör Handbücher anderer Marken

Hillco

Hillco 2810 Bedienungsanleitung

Siemens

Siemens QSA2700D Bedienerhandbuch

Contours

Contours ZY024 Bedienungsanleitung

Saivod

Saivod VS621 Bedienungsanleitung

Virtuox

Virtuox VirtuCLEAN 2.0 Bedienungsanleitung

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Bedienungsanleitung

Z-Wave

Z-Wave HSD-200Z Bedienungsanleitung

turck

turck FMX-IM-2UPLI63FX Bedienungsanleitung

Decagon Devices

Decagon Devices 10HS Bedienungsanleitung

UPPAbaby

UPPAbaby Cup Holder Bedienungsanleitung

Elko

Elko SmartSensor Leakage Wireless Bedienungsanleitung

Grizzly

Grizzly H8371 Bedienungsanleitung

Panasonic

Panasonic HG-T Series Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 250 Series Referenzhandbuch

DigiDesign

DigiDesign 888/24 I/O Bedienungsanleitung

PROZIS

PROZIS QUAY Bedienungsanleitung

patagonia

patagonia PSI Vest Bedienungsanleitung

SFC Energy

SFC Energy EFOY GO! Bedienungsanleitung